Description:
1. The code switch guides the type of power-on protocol
2. Power-on automatic cycle test.
3. Press the button to exit the automatic cycle test
4. Press the up button, the voltage rises, press the down button voltage drops
5. In the PD state, the up/down keys are all up cycle test functions.
6. The test current has nothing to do with the test board, it is related to the adapter.
7. Large USB male, MICRO, TYPE-C, D+/D- at the three inputs are all connected, can test QC3.0/QC2.0/MTK/FCP/IWATT
8. Output USB socket directly connected to the load / resistor
9. The code switch is in the 000 state, only the voltage and current are tested, and D+/D- is not added.
10. There is no load current, the battery grid does not run, when there is load current, the the battery grid is running.
11.PD test type:
1. 3A-cy2211: 5V 9V 12V 15V 18V 20V
2. 5A-cy2211: 5V 9V 12V 15V 16V 18V
3. ASUS: 5V 9V 12V 15V 20V
4. Apple 29W: 5V 14.8V
5. Imitation apple 29W: 5V 9V 12V 15V
6. Apple 87W: 5V 9V 20V
7. Imitation apple 87W: 5V 9V 20V
8. UGREEN : 5V 9V 15V 20V
9. Le Derui: 5V 9V 14.8V
10. Cypress 2134: 5V 9V 12V 15V 20V
11. IP6518: 5V 9V 12V
IP6518: 5V 9V 12V 15V 20V
12.IP2712: 5V 9V 12V 15V 20V
13.CSS34P16: 5V 9V 12V 15V 20V
14.FL5002: 5V 12V 15V 20V
15.SW6106: 5V 9V 12V
16.LT2201P: 5V 9V 12V
17.IP5328PD 5V 9V 12V (with current test below 300MA)
18.IP6510 5V 9V 12V
19. Lenovo 65W 5V 9V 15V 20V
Fast charge test operation method:
1>> Input port: USB male,
connect charger or mobile power output port, MICRO can also be used as
input port (when connecting data cable, you must use fast charge data
line).
2>> Output port, orange large
USB socket, load can be connected with high power resistor (100W/5
ohm--100W--50 ohm), can also be connected to the load meter to adjust
the load size, the output current is determined by the load size The
JL-001 test board supports 5A current test, please feel free to use it.
3>> JL-001 supports five fast
charging protocols: 001=QC2.0, 010=QC3.0, 011=MTK, 100=IWATT, 101=FCP.
First, according to the fast charging protocol of your own products,
through the different settings of the white dial switch, it is
guaranteed to be consistent with the fast charging protocol of its own
products.
4>> When the fast charge
protocol of the white dial switch is set to match the product agreement,
the test can be started. The USB male plug is inserted into the output
of the product, the black film is lit, and the JL-001 black switch is
adjusted. ). The display voltage changes, indicating that the protocol
handshake is successful, and the display current is determined by the
load adjustment size.
5>> QC3.0 test: white dial
switch setting 010=QC3.0, USB male plug in QC3.0 charger screen lights
up 5.2V, after 2 seconds, the voltage starts to rise automatically to
12, automatically drops to 3.6V, when pressing the UP or DP button, the
voltage will be fixed at the current voltage value, no longer jump, and
then press the button, the voltage will jump according to the change of
0.2V, then the QC3.0 test is completed.
6>> Note that when testing three
fast charging protocols, QC3.0, MTK, and IWATT, the load must have a
current of 500MA, otherwise the test will be interrupted.
Package Includes:
1 x USB Tester
