RadioLink AT9S 2.4GHz 10CH Upgrade Transmitter with R9DS DSSS&FHSS Receiver

To Buy It Click Here

Feature

1.Fast response, 3ms only, which is much less than the average 20ms even 9 channels
act synchronously.
2.English,Chinese ,EsPanol,Deutsch,French,Italiano,Turkish,Russian&Korean menu can be
switched, full types specialize helicopter 8 swash plate modes, fixed wing 2 airfoils
3 rears, gliders 4 airfoils and 2 rears, multi-copter menu.
3.DSSS and FHSS spread-spectrum technology working synchronously, QPSK modulation
support excellent anti-interference performance.
4.Programmable mix control. Basic menu, advanced menu, graphic view for verities of
throttle and servo curve.
5.Support S-BUS, PPM and PWM signal.
6.Unique telemetry
  Receiver integrates signal strength and voltage telemetry sensor.
  Both R10DS and R9DS support extended engine voltage telemetry module PRM-01 and OSD
info telemetry module PRM-02. PRM-02 can feedback GPS, SPEED, voltage etc. on
AT9S/AT10 display when work with flight controller APM or PIX.
7.4096 section precision, 0.25us per section, servo anti-shake rudder.
8.Vibration alarm.
9.Support USB online upgrade, the upgrade firmware V1.3.2 add CAR and BOAT model type.
10.Four VR switches, three three-gear switches, four two-gear switches, a reset
trainer switch. Support multiple aerial control mode and PTZ control.

Specification

1.Size: AT9S- 183*100*193mm, R9DS- 41*23*14mm
2.Weight: 0.88kg
3.Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz)
4.Modulation mode: QPSK
5.Channel bandwidth: 5.0 MHz
6.Spread spectrum: DSSS&FHSS
7.Adjacent channel rejection: >38dbm
8.Transmitter power: <100mW (20dbm )
9.Operating current: <90mA
10.Operating voltage: 7.4~18.0V
11.Control distance: more than 900 meters ground, 1500 meters air, the actual control
distance depends on the flying environment
12.Channel: 9 channels
13.Compatible model: include all 120 degree and 90 degree swash-plate helicopter, all
fix wings, glider and multi-rotor
14.Simulator model: under the simulator model the transmitter action turn off, change
to power saving model
15.Screen: 2.8 inches 16 colorful screen, 240*320 pixels
16.Support receivers: R9DS(S-BUS&PWM), R10DS and R6DS

Note
If you do not receive CD, click here.
Click for New Manual for testing RSSI data.
Package

1x RadioLink AT9S Upgrade Transmitter
1x Mini R9DS
1x CD

Digital PH Meter 0.01 pH Water Quality Test for Household Drinking Water Pool Hydroponics

To Buy It Click Here

✔SPECIFICATION

- Measuring Range: 0.00 -14.00 pH

- Resolution: 0.01 pH

- Accuracy: ±0.01 pH

- Batteries: 2*1.5V ( LR44 Button cell include)

- Backlight Time: 20 seconds

- Operating Temperature: 0-60℃

- Dimension: 155mm*31mm*18mm

- Weight: 50g/(1.70z)

 

✔OPERATION

1. Remove the protective cap and protective film on the screen.

2. Rinse the electrode with distilled water, and suck it with filter paper. 

3. Turn on the meter, immerse the pH meter electrode into the test solution.(can not be over the immersion line) 

4. Stir gently and wait about 30s for the reading to stabilize. 

5. Turn off the meter after use, clear the electrode with pure water and dry it with filter paper.

 

✔Note

*The meter was calibrated before off the factory. Do not need to calibrate the meter when first use. 

*The glass electrode is fragile, treat it carefully. Don't touch it by hard tools or fingers. 

*Please do not immerse the meter into the solution over the "warning line", to avoid damage to the circuit board. 

*If the "cal'(calibration) button is pressed and electrode exposed to air for a long time,calibration is required.

Package included: 
1x Digital PH Meter
3x PH Buffer Powder

Air Purifier Humidifier LED Display Remote Control 4.8L Water Tank Time Setting

To Buy It Click Here

Features:

-Air Purifier: Built-in filter, bringing fresh and health air to your house.

-Humidifier & Aroma diffuser: Promote humidity effectively, keeping your home comfortable. Besides, you can add 2-3 drop essential oils in the water to make your room fragrant. 

-4.8L water tank capacity for long lasting humidification.

-3 modes to meet your need in different condition.

-Low noise: Quiet operation, timer function to a maximum of 12 hours. Provide a comfortable and pleasant environment.

-Auto shutoff: When water runs out, the diffuser would automatically shut off.

 

Specification:

Water Tank Capacity: 4.8L

Noise: ≤35dB 

Spray Volume: Max. 350ml/h

Rated Power: 35W

Voltage: 220V

Cord Length: 1m

Application Area: 21-30m²

Size: 17.5x17.5x32cm/5.6x5.6x9.6''

Weight: 2kg

 

Package of content:

1 x Air Purifier

1 x 10ML Essential Oil

24K Gold Handmade Soap Seaweed Deep Nourishing Deep Cleansing Soap Moisturizing

To Buy It Click Here

Description:

Item Type: 24K Gold Handmade Soap Seaweed

Color: Gold

Net Weight: 40g

Size: As Shown In Pictures

Quantity: 1Pc

 

Package Included:

1 x 24K Gold Handmade Soap Seaweed

 

Note:

1. The real color of the item may be slightly different from the pictures shown on website

    caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight deviation for the measurement data.

5 Inch Upgrade USB Plasma Ball Sphere Light Crystal Light Magic Desk Lamp Novelty Light Home Decor

To Buy It Click Here

Description:
Weight: About 482g
Size: 5 Inches

A perfect decoration for homes, parties, cafe, bars & restaurants etc.
Beautiful combination of Neon gases which help create Plasma and Neon have been brought together to form a visual feast.
Enjoy the amazement when the electricity follows your finger tips across the 3-inch glass ball.
Small enough to not take up too much desktop space.
Big enough to amaze your co-workers with its awe inspiring light show.

Package Included:
1 x USB Plasma Light Ball (Red Light)
1 x USB Cable

Portable Vacuum Cleaner 12V Cordless Portable Handheld Wet Dry Dust Cleaner

To Buy It Click Here

Specifications:

Colors: Black

Type:
#1: Wire;
#2: Wireless

Material: ABS

Voltage: 12V

Power: 120W

Vacuum Degree: ≥3.5Kpa

Dust Bin Capacity: 0.5L

Cable Length: 5m

Size: 38x11x9cm/14.96x4.33x3.54''

Weight: 1.1KG

Features:

-Strong suction, can pick up cigarette ash, hair, wastepaper, cookie crumbs, as well as liquids. Keep your car clean and tidy. 

-Compact and lightweight, only takes up a tiny place in your car.

-5m long cable allows to use and clean the trunk.

-Detachable HEPA filter, reusable and easy to wash.

-Extended mouth are used for cleaning different surfaces and areas. You can clean hard-to-reach areas such as seat buttom, gaps, etc.

 

Package of content:

1 x Car Vacuum Cleaner

1 x Hairbrush

1 x Flat Suction Nozzle

1 x EVA Pipe

Creality 3D® CR20 DIY 3D Printer 220*220*250mm Printing Size With Upgraded Chip/Self-adhesive Platform/Resume Print/Off-line Print/Larger leveling nut/MK10 Extrusion

To Buy It Click Here

Features:

◆ Small and portable: It can be lifted with one hand, easy to move while printing area is still up to 220X220X250mm
◆ Integrated one piece appearance, simple but generous.

◆ Larger leveling nut: Leveling is more convenient.
◆ Self-adhesive platform, more convenient to take the model

◆ Creality3d V2.1 motherboard: all-upgrade, quality assurance, industrial-grade process, 200 hours of continuous printing without pressure.

◆ Resume printing while power-off: Effectively reduce the model rejection caused by power failure.

◆  Linear pulley system: patented technology, V-profile + precision pulley with perfect fit, running smoothly and more wear-resistant. Effectively reduce noise.

◆ MK10 Extrusion Mechanism: A brand-new patented infrastructure that effectively reduces the risk of plugging and poor spillage and can print almost all consumables on the market.

◆ Six screws for quick installation: Two modules, just need six screws and can be quickly installation.

Specifications
Brand	Creality 3D
Model	CR20
Frame	Unique aluminum profile
Molding Tech.	FDM
Printing Size	220*220*250mm
Printing Speed	≤180mm/s, Normal 30-60mm/s
Precision	±0.1mm
Slice Thickness	0.1-0.4mm
Nozzle Diameter	Standard 0.4mm,can be in 0.2,0.3mm
Nozzle Number	1
Nozzle Temp.	≤250℃
Bed Temp.	≤110℃
Working Mode	Online or SD card offline
File Format	STL,Obj,amf
Slice Software	Cura, Repetier-Host ,Simplify3D
Power Supply	Input:AC 100-120V/6.8A 200-240V/3.4A 50/60Hz Output:DC 24V
Total Power	270W
Fliament	PLA/ABS/TPU and so on
Fliament diameter	1.75mm
XY Axis Positioning Accuracy	0.01mm
Z Axis Positioning Accuracy	0.001mm
Control Board Type	2560
LCD Display	12864 Mini
Language	Chinese/EN
Operating System	Windows XP/Vista/7/10 MAC Linux
Motor	42-34 motor    Step angle 1.8°
Motor Driver	A4988
Resume print	YES
Net Weight	8.0KG
Gross Weight	10.2KG
Printer Size	420*440*470mm
Package Size	495*485*295mm

Reference Video:

1. Open Box video
2. Rotating display video
3. Leveling video
 

User Manual

Package Included:

1x Creality 3D® CR20 3D Printer

XVICO® Pioneer-3D Printer DIY Kit 220*220*240mm Printing Size with 2.4-Inch Full-Color Touch Screen/Power Resume/Filament Run-Out Detection/Intelligent Leveling Heated Bed

To Buy It Click Here

Features:

● Printing size is about 220*220*240mm.
● The motherboard uses the master core of stm32. Printing models will be faster.
● 2.4-inch full-color touch screen, the operation is more clearly visible.
● With Intelligent leveling system. Intelligent leveling printing platform for smoother printing, save more time for manual leveling.

● Printer operation supports 9 languages translate.

● Support power resume / power-off continued to play and filament run-out detection.

● The fastest printing speed can reach 200mm/s.

● Support offline upgrade, It just needs to copy the program to the TF card and can be upgraded.

● The motherboard & power supply are hidden, and the heated bed platform tempered glass material, which makes them seem more nice and simple.
● Power Supply: Plug EU Standard(Default)