Wireless Voice Intercom Doorbell Battery Mobile 200M Outdoor Transmitter with Indoor Receiver

To Buy It Click Here

Specification :

Indoor-bell:
Power supply: built-in rechargeable Li-ion battery
Transmission distance: 50-100m(without any obstacle)
Work time: 48 hours
Wireless frequency: 467.6375 mhz
Working temperature: -20℃ to +55℃
Size:100mm*54mm*20mm
 
Outdoor-bell: 
Power supply: 4 x AAA Battery(not included) 
Transmission distance: 300m (without any obstacle)
Work time: 6 months 
Wireless frequency: 467.6375 mhz
Working temperature: -20℃ ~ +55℃ 
Net weight: approx. 55g 
Gross weight: approx. 150g 
Product size: approx. 100*60*15mm/3.93*2.36*0.59''
Gross weight: approx 165*118*24mm/6.49*4.64*0.94'' 
Color: Silver 
Size:100mm*60mm*14.8mm
Applicable scence:Home.Factory.Hotel.Hospital.Store.Office.etc.
 
Operational principle

1.When the indoor unit is turned on, it can receive the signal from the outdoor unit, and when it is turned off, it cannot receive the signal.

2.Press the outdoor unit and the indoor unit presses the dialogue button to talk.

3.Low battery indicator: When the outdoor unit is low, the red light flashes;and when the indoor unit is low, the green light flashes.

4.Intercom indicator: 

a.When the indoor unit receives the signal from the outdoor unit,the green light flashes.

b.When two indoor units appear at the same time, press the internal pager,they can call each other; when the indoor unit calls another indoor unit, the indoor opportunity to make a call lights up red, and the indoor opportunity to receive the call lights up in blue.

 

Installation matters:

Outdoor unit:

1. Unscrew the screw with a screwdriver and remove the battery cover.

2. Install 4*AAA battery.

3.Install the battery cover and screw on it.

4.Press the intercom button: 

  a.The button light is on, indicating that the machine is normal.

  b.The button light does not light, indicating that the battery is not installed.

  c.If the battery is reversed, it will ring, but it will not talk properly.

Indoor unit:

Press and hold the power button for 3 seconds - after the intercom light flashes a few times, press the intercom button to make a "dudu" sound indicating normal.

Low battery prompt:

Outdoor unit: When the outdoor unit is pressed, the red light flashes, and the low power indicator of the indoor unit also flashes red and the sound of “dudu” is emitted.Indoor unit:The low power indicator flashes green and a "dudu" sound is emitted.

 

Package includeds :

1 x Indoor unit

1 x Outdoor unit

1 x Screwdriver

1 x Double-sided tape

1 x Charging Cable

 

USB Backpack Anti-thief Shoulder Bag 15.6 Inch Laptop Bag Camping Travel Bag School Bag

To Buy It Click Here

Specifications:

Material	Nylon cloth
Lining material	Polyester
Color	Black, grey
Size	35 x 13.5 x 50cm / 13.78 x 5.31 x 19.69inch
Laptop pack capacity	15.6inch laptop
Weight	1000g

Features:

5mm thick leather.

USB external jack.

External music jack.

Comfortable and breathable fabric.

Package Includes:

1 x USB backpack

Unisex Men Women Casual Waterproof Silicone Analog Wrist Quartz Watch

To Buy It Click Here

100% brand new and high quality.

Life Waterproof and easy to wear

 

Type:Waist Watch

Color:White/Black

Band Material:Silicone

Total Length:about 26cm

Dial Diameter:about 4.5cm

Dial Thick:about 1cm

Watch Band Width:about 2cm

Gender: Unisex

Weight:abou 63g

 

Package:

1 x Waist Watch 

 

PLS NOTE THAT due to lighting effects, monitor's brightness/contrast settings etc,

there could be some slight differences in the color tone of the pictures and the actual item!

We guarantee the style is the same as shown in the pictures.

please allow 0.5-1cm differences due to manual measurement.

Thank you!

Touch WiFi Mirror Link Box Car DVD Player WiFi Display System For Android And IOS

To Buy It Click Here

Description:
1. Car WIFI Display, the most cutting-edge high-tech products, is designed specially for mobile devices and Portable devices, it pefectly Combines the mobile device with the car, the phone acts as a car video of the "brain".
2. Supporting the Mobile phone or tablet PC which has the WIFI MIRACAST, AIRPALY Mirroring and the DLNA protocol, it can transmit the signal to the monitor conveniently or directly and achieve Dual interaction. Mobile wireless shares the screen to the car screen.
3. Achieve mapped to car display, enabling networked navigation, Car audio and video, and entertainment. In addition, you can use the photos, music, videos, etc. Which in the mobile or tablet PC, through wireless ways, easily and fastly transmit to the car monitor.

Feature:
WIFI Standard: WIF802.11b/g/n or 802.11ac/b/g/n
WIFI Channel: 2.4GHz/5GHz
Input: AV/1Aolt
Work Temperature: -20~75
Agreements: Miracast/ Airplay/ DLNA
Working Power: 2.5W
Product Voltage: 12V/1A 5V/1A

Package Included:
1 X Device
1 X External Antenna
1 X Red, Yellow, White Standard AV Interface
1 X 12V Power Supply ( Red Positive, Negative Black)
1 X HDMI Cable
1 X USB Power Cable
1 X User Manual
1 X Gift Box

TOPK QC3.0 30W LED Indicator Dual USB Charger EU Adapter for Nokia X6 Xiaomi Mi A2 Pocophone F1

 To Buy It Click Here

Features:
QC3.0+2.4A 30W Powerful Output;
Safe and Sturdy Design.

General Specification:

Brand	TOPK
Plug	EU
Color	White
USB Port	2
Total Power	30W(Max)
Input	AC100-240V,50/60HZ
Output	QC3.0 Output:3.6V-6V=3A 6V-9V=2A/9V-12V=1.5A Auto-ID Output:5V=2.4A
Fast Charging	QC3.0
Material	ABS fireproof material
Weight	100g±10g

Package  Included:
1*TOPK 2 USB Ports Fast Charging EU Plug Wall Travel Charger

TOPK 3A Micro USB LCD Display Fast Charging Data Cable 3.28ft/1m for Honor 8X Xiaomi Redmi Note 5

To Buy It Click Here

Features:
Strength and Durability
Stronger than standard cables, TOPK is more flexible and has reinforced ports for long-term reliability.
Unique Design
The internal 22AWG Power Wire Core and 30AWG Data Wire Core enable the cable to maximize your phone's data and charging performance.
Standard  Type C Connection
Works with Samsung, HUAWEI, SONY, Nokia, Xiaomi and many more.

General Specification:

Brand	TOPK
Color	Black&Grey
Cable Length	100cm
Cable Plug	Micro USB
Product Weight	About 50g

Technical Parameters:

Wire Core	Pure Copper Core
Wire Material	TPE Cover & Polyester Fiber Jacket
Cable Current	3A
Data Sync Speed	480Mb/s

Package  Included:
1 * TOPK Micro USB Charging Data Cable

Teclast S10 DDR3 8G 1600Mhz Desktop Computer Memory 240Pin PC Gaming Memory Modules

To Buy It Click Here

Specification:

1. Brand: Teclast
2. Model: S10
3. Application: Desktop computer
4. Type: DDR3
5. Capacity: 8G 1600Mhz
6. Interface: 240Pin
7. Working voltage: 1.5V
8. Bandwidth: PC3-12800

Features:

1. Selected original flash more stable, inspire computer potential.
2. High quality 8-layer PCB.
3. Match with motherboard, compatibilty with AMD and INTEL.
4. Wearproof golden finger.

Note: If you want to expand the computer memory, you must first to ensure the maximum memory capacity that the computer system
and the motherboard can support, the rest of memory slots on the motherboard and the type or specification of the supporting extended memory.

Package included:

1* Teclast S10 DDR3 8G 1600Mhz Desktop Memory 

SSK SCRM601 2-In-1 High Speed USB 3.0 SD / TF / Micro SD Card Reader

To Buy It Click Here

Specification:

1. Brand: SSK
2. Model: SCRM601
3. Color: White + Black
4. Material: ABS
5. Connector: USB 3.0
6. Card Slot: TF/SD Card
7. Supported Cards: SD/SDHC/SDXC/Micro SD/Micro SDHC/Micro SDXC/T-Flash
8. Dimension: 70*25*11mm

Features:

1. Plug and play, no driver needed.
2. USB3.0 high speed write and read, speed can be up to 5Gbps.
3. Supports TF/SD card reading, but dual card slots can't work at the same time.

Package Included:

1 * SSK SCRM601 2-In-1 High Speed USB 3.0 SD / TF / Micro SD Card Reader

XANES F66 0.96" Color Screen 3ATM Waterproof Smart Bracelet Pedometer Sleep Monitor Fitness Smart Watch

To Buy It Click Here

Specifications:

Item	XANES F66 Smart Bracelet
Brand	XANES
Model	F66
Color	Red / Pink / Blue / Purple / Black
CPU	Nordic nFr Series
Sensor	MSA 301
Display	0.96" Color Screen
Resolution	80*160
Power Supply	90mAh Battery
Charging Time	About 1h
Standby Time	7-10 Days
Waterproof Rating	3ATM
Function	Pedometer, Mileage, Calories, Music Control,  Sports Mode, Call/Message Reminder, Weather Forecast, Alarm, Bluetooth Camera,  Sedentary Reminder, Sleep Monitor, Bluetooth, etc.

Features:
1. 30 meters waterproof.
2. HD 0.96 inch display color screen.
3. TPU skin-friendly wristband.
4. Sports pedometer, accurately calculate the number of movement steps through the efficient sensor.
5. Riding mode, according to the mode of movement, accurate calculation of calorie, time, etc.
6. APP application, history records your weekly, monthly, yearly athletic data, sleep data to form a data medical chart.
7. Sleep monitoring, track and analyze your sleep quality throughout and you can set a vibrating alarm.

Package Included:
1 × F66 Smart Bracelet
1 × User Manual

REMAX RC-100a 2.1A USB Type C Braided Charging Data Cable 3.28ft/1m for Xiaomi Mi A2 Pocophone F1

To Buy It Click Here

Features:
Strength and Durability
Stronger than standard cables, REMAX is more flexible and has reinforced ports for long-term reliability.
Unique Design
The internal 22AWG Power Wire Core and 30AWG Data Wire Core enable the cable to maximize your phone's data and charging performance.
Standard  Type C Connection
Works with Samsung, HUAWEI, SONY, Nokia, Xiaomi, Meizu and many more.

General Specification:

Brand	REMAX
Model	RC-100a
Color	Black,Gold,Sliver
Cable Length	100cm
Cable Plug	Type-C
Product Weight	About 50g

Technical Parameters:

Wire Core	Tinned copper
Wire Material	Aluminum alloy
Cable Current	2.1A(max)
Data Sync Speed	480Mb/s

Package  Included:
1 * REMAX Type C Charging Data Cable

NITECORE EC4GTS XHP35 HD 1800LM 8Modes Unibody Compact Long Thow Searching 18650 Flashlight

To Buy It Click Here

Specification:

Product name:	Nitecore EC4GTS LED Flashlight
Brand:	Nitecore
Model:	EC4GTS
Emitter Type:	XHP35 HD
Peak Beam Intensity:	39220 cd
Max Output:	1800 lumens
Range:	396m
Mode:	Turbo / High / Medium / Low / Ultralow / Strobe / SOS / Beacon
Lumens:	Turbo: 1800 lumens High: 800 lumens Medium: 240 lumens Low: 50 lumens Ultralow: 1 lumen Strobe: 1800 lumens SOS: 1800 lumens Beacon: 1800 lumens
Runtime:	1 hr, 3 hr 15 min, 12 hr, 58 hr, 380 hr, --, --, --
Battery Configurations:	2 x 18650 battery (Not Included)
Switch Type:	Clicky
Switch Location:	Side switch
Material:	Aluminium alloy 6061-T6, Mil-Spec HAⅢ Anodizing
Impact Resistance:	1m
Waterproof:	IPX8 (underwater 2m)
Reflector:	SMO
Lens:	Durable temperd glass with scratch resistant AR coating
Carrying Strap:	Lanyard
Color:	Black
Weight:	171 g / 6.03 oz
Size:	155 mm x 40 mm(Length x Head Dia.)

Features:

1. Utilizes  XHP35 HD LED, with maximum output of 1800 lumens
2. Maximum peak beam intensity of 39220cd and maximum throw of 396m.
3. Made with unibody die-cast technology.
4. Thumbscrew lock on tail cap doubles as a tripod connector.
5. An optical system combined with crystal coating and "Precision Digital Optics Technology"(PDOT) for unparalleled reflector performance.
6. High effciency constant circuit provides stable output up to 380 hours.

7. The metal side switch controls 5 brightness  levels and 3 special modes.
8. A power indicator beneath the side switch indicates the remaining battery power.
9. The power indicator can also display the battery voltage(±0.1V).
10. Rigid double layer tube design.
11. Built-in charging via micro-USB port, so convenient to be charged at home or on the go.
12. NL1835HP 3500mAh 18650 rechargeable battery included.
13. Incorporated advanced temperature regulation module and electronic reverse polarity protection.

14. Optical lenses with double-sided scratch resistant coating.

15. Constructed from aero grade aluminum alloy with HA Ⅲmillitary grade hard-anodized finish.

16. Waterproof in accordance with IPX8 (2 meters submersible), and impact resistant to 1 meter.

Package Included: 
1 x Nitecore EC4GTS LED Flashlight

1 x Lanyard
1 x Holster

Mofun BB13005 336PCS 1/18 2.4G 4CH Rc Car DIY Assembling Blocks Armed Patrol Vehicle

To Buy It Click Here

Description:

Basic information	Brand:Mofun Item No:BB13005 Scale: 1/18 Color:Black Age:8+ Number of blocks:336pcs	Power System
Transmitter	Frequency: 2.4G Channel: 4CH Remote distance:about 20m Battery:2X 1.5v AA(not included)	Battery	Car Battery: 3.7V  150mAh  Lipo battery(included) Charging time:about 60minutes Continuous playing time:about 15minutes
Other	Material:ABS and electronic components	Dimension	Car Size:21.2*13*13cm Box Size:35*19*9cm

This rc car is not a pre-assembled rc car,you will receive some building blocks and then you should assemble by yourself

Recommedation:other building block rc car you may like(the packaging do not included)
Military truck building block Rc Car,please click here

Package included:
1x Rc Car(included the car battery)
1X Transmitter
1X USB Charging Cable
1X Manual

HY29 Multi-function Transfer Multi-purpose Plug Car Charger Power Distribution

To Buy It Click Here

Description:
1. Dual USB charging interface design, can simultaneously charge mobile phone tablet devices.
2. Streamlined process design, sturdy and durable, matte texture looks more stylish and compact body.
3. Increase the radiator parts, intelligent constant temperature, fast effect, safe and not hurt the machine.
4. Real-time detection of car voltage, orange LED light visually presented, keep abreast of car safety status.
5. Adopt industrial grade chip, with strong and stable central control, do not hurt the mobile phone and not hurt the car.

6. Wireless binding, plug and play, eliminating the need for fixed trouble, 90° rotation, saving space and convenient use.
7. Suitable for different sizes of charging ports and power ports, intelligent carrying 12V-24V wide voltage, power is full of you.

8. High power, not false. Three-hole expansion to support the simultaneous use of three point smoke holes, covering the daily power supply.

9. With automatic power-off recovery function, intelligent power-off and recovery when the current exceeds the load, built-in 10A fuse, double protection, higher security, more assured use.

10. The new turbulence mode intelligently adapts to different models, and adjusts the output at any time with the saturation of the electronic device, which is safer without damaging the battery.

Feature:
Brand: HYUNDAI
Model: HY29

Material: ABS

Input Voltage: 12-24 (V)

Output Voltage: 5 (V)

Output Current: 3100 (mA)

Working Temperature: 0-50 (°C)

Output Interface: USB

Size: 94x115x33mm

Package Included:
1 X HY29 Car Charger

Graupner GM X-8N 2.4G 4CH HoTT Transmitter Surface Radio Remote Control W/ Receiver for Rc Car Boat

To Buy It Click Here

Description:
Item brand:Graupner GM
Item number:X-8N

Channel:4 Channel

Operating Voltage:3.4 ~ 6V

Battery:Alikaline, Nixx 4 cells, LiPo 1cell

Charging Rate:About 210 mA

Output Power:About 100 mW

Frequency:2.4000 ~ 2.4835 GHz

Modulation:FHSS

Temperature Range:About -10---+55℃-50---+130℉

Antenna:Dipole Antenna

Display:128 x 64 Graphic LCD

Low Voltage Warning:Yes (LED, Buzzer)

High Temperature Warning:Yes (LED, Buzzer)

Battery Charging:DC Jack

Firmware Update:Yes (USB Cable, SD-CARD)

Dimensions approx:239 x 170.2 x 139.8 mm 9.4 x 6.7 x 5.5 in

Features:

4 Channel 2.4GHz Graupner HoTT technology

Bi-directional communication between transmitter and receiver

Adjustable steering wheel angle

Removable steering wheel position for left hand use

Trims can be moved for left and right hand use

Adjustable gas and brake lever

Wireless telemetry setup and programming

Headphone jack

Real-time voice announcements

Micro SD card for telemetry data recording 

New GR-8 receiver supporting SUMD V2 bus system

Selectable frame rates: 1.5ms, 3.0ms, SUMD V2 3.0ms, 6.0ms, 12.0ms and 24.0ms

4 wheel steering mode with dual ESC

Ultrafast response times through direct data transmission from the main processor

Multiple model copy functions including to SD card

Super dual rate and expo menu

Clocks for refueling stops and running time

Round time stop function

Servo speed settings

Throttle travel settings

Brake settings

Anti-locking system for the brake

Mixer and brake mixer

Special mixers and modes for crawlers, track vehicles, and boats with two motors

Telemetry can be switched off for competition

Programmable Failsafe
 

Package included:
1X Graupner HoTT X-8N Transmitter

1X Graupner HoTT V2 GR-8 Telemetry Receiver
 1X LiPo 4000mAh TX Battery

1X Manual
1X Temperature Voltage & Telemetry Sensor
1X Left-Handed Mounting Set
1X 4 Gb SD Card

1X Transmitter Charger

1X USB Software Update Board

1X USB Update Cable

Gamesir T6 Single Hand Bluetooth 4-6 Inch Adjustable Gamepad for Mobile Game

To Buy It Click Here

Features:

Small and light weight, easy to carry, allows you to enjoy mobile games anytime
Single handed gamepad, less buttons to be remembered
A, B user-defined buttons, you can set them as you like
Bluetooth wireless connection
Gamepad adjustable, compatible with 4 - 6 inches mobile phone
Built-in 300mah rechargeable battery
OS support: for Android 4.0 and above, for IOS 7.0 and above
Size: 115 x 85 x 23mm
Weight: 98g

Package Included:

1 x Gamesir T6 Gamepad
1 x USB Cable
1 x User Manual

Flint Stone Survival Tools Kit Bow Drill Blowing Torch Tool Portable Outdoor Camping Primitive Fire Starter

To Buy It Click Here

Specifications:

Material	High-carbon steel
Flint Stone size	8 x 4 x 0.5cm / 3.15 x 1.57 x 0.20inch
Color	Sliver
Include	Flint, huolian, carbon cloth, hemp, blowing torch, iron box
Weight	235g

Features:

Sturdy material.

Small and portable.

Versatile use.
Traditional fire.
 

Package Includes:

1 x Survival tools kit

DUX DUCIS Lightning for Fast Charging Data Cable for iPhone X 7 8 6 6s Plus 5s 5 se

To Buy It Click Here

General Specification:

Brand: DUX DUCIS

Color: Grey

Cable Length: 1m

Cable Plug: Lightning

 

Technical Parameters:

Wire Core: Tinned Copper

Wire Material: Aluminum Alloy + Nylon Braided

Cable Current: 5V 2A Max

 

Package  Included:

1 * DUX DUCIS 2A Braided Lightning for Charging Data Cable 

BGA IC Chip Repair Knife Thin Blades CPU A7 A8 A9 A10 Motherboard Burin To Remove Phone Processors Knifes for iPhone

To Buy It Click Here

Features:

1. All sorts of small chips will not a bit.

2. Break 6 s power supply IC IC, all kinds of glass does not hurt, not a bit, without risk.

3. Baseband WIFI CPU module, no risk no a bit.

4. CPU upper deflated, no risk.

5. A4 - A9 CPU without risk, dismantle all CPU upper without risk.

6. Break the A8 A9 dedicated CPU will not a bit.

7. Tin widened scraping knife, scrape one CPU can, need not repeat back and forth.

Package Included:

1 x BGA IC Chip Repair Knife Thin Blades

Bakeey Type C USB3.0 High Speed Expansion 4 Ports HUB USB Splitter Adapter for Xiaomi Mi A2

To Buy It Click Here

Features:
Plug and play, easy to install.
Stable performance, durable and reliable.
This 4 ports USB 3.0 hub is a high-performance aluminum USB hub.
Ergonomic slant interface design, humanized technology considerations.
Reasonable USB interface layout, can support four USB high-speed devices simultaneously
USB 3.0, 10x faster than USB 2.0, up to 5Gbps transfer rate. Compatible with USB 2.0 and 1.1  specifications.
Support overload voltage and inter-current protection function, can protect the connected equipment and HUB itself effectively when suddenly energized.

Specifications:
Brand:Bakeey
Color: Black
Material: Aluminium alloy shell
Size: Approx. 9.8 x 5.5 x 2.7cm(L x W x H)
System requirements: Windows XP/Vista/7/8 and OS
Bus-Power limit Current Protection: 900mA(When external adapter applied)

Package included:
1 x  USB3.0 4 Ports HUB Splitter Adapter

QC3.0/2.0/MTK/FCP/IWATT/PD Test Board/Tempter/Fast Charge Protocol PD Controller Full Protocol USB Tester

To Buy It Click Here

Description:

1. The code switch guides the type of power-on protocol

2. Power-on automatic cycle test.

3. Press the button to exit the automatic cycle test

4. Press the up button, the voltage rises, press the down button voltage drops

5. In the PD state, the up/down keys are all up cycle test functions.

6. The test current has nothing to do with the test board, it is related to the adapter.

7. Large USB male, MICRO, TYPE-C, D+/D- at the three inputs are all connected, can test QC3.0/QC2.0/MTK/FCP/IWATT

8. Output USB socket directly connected to the load / resistor

9. The code switch is in the 000 state, only the voltage and current are tested, and D+/D- is not added.

10. There is no load current, the battery grid does not run, when there is load current, the the battery grid is running.

11.PD test type:

1. 3A-cy2211: 5V 9V 12V 15V 18V 20V

2. 5A-cy2211: 5V 9V 12V 15V 16V 18V

3. ASUS: 5V 9V 12V 15V 20V

4. Apple 29W: 5V 14.8V

5. Imitation apple 29W: 5V 9V 12V 15V

6. Apple 87W: 5V 9V 20V

7. Imitation apple 87W: 5V 9V 20V

8. UGREEN : 5V 9V 15V 20V

9. Le Derui: 5V 9V 14.8V

10. Cypress 2134: 5V 9V 12V 15V 20V

11. IP6518: 5V 9V 12V

     IP6518: 5V 9V 12V 15V 20V

12.IP2712: 5V 9V 12V 15V 20V

13.CSS34P16: 5V 9V 12V 15V 20V

14.FL5002: 5V 12V 15V 20V

15.SW6106: 5V 9V 12V

16.LT2201P: 5V 9V 12V

17.IP5328PD 5V 9V 12V (with current test below 300MA)

18.IP6510 5V 9V 12V

19. Lenovo 65W 5V 9V 15V 20V

Fast charge test operation method:

 

1>> Input port: USB male, connect charger or mobile power output port, MICRO can also be used as input port (when connecting data cable, you must use fast charge data line).

 

2>> Output port, orange large USB socket, load can be connected with high power resistor (100W/5 ohm--100W--50 ohm), can also be connected to the load meter to adjust the load size, the output current is determined by the load size The JL-001 test board supports 5A current test, please feel free to use it.

 

3>> JL-001 supports five fast charging protocols: 001=QC2.0, 010=QC3.0, 011=MTK, 100=IWATT, 101=FCP. First, according to the fast charging protocol of your own products, through the different settings of the white dial switch, it is guaranteed to be consistent with the fast charging protocol of its own products.

 

4>> When the fast charge protocol of the white dial switch is set to match the product agreement, the test can be started. The USB male plug is inserted into the output of the product, the black film is lit, and the JL-001 black switch is adjusted. ). The display voltage changes, indicating that the protocol handshake is successful, and the display current is determined by the load adjustment size.

 

5>> QC3.0 test: white dial switch setting 010=QC3.0, USB male plug in QC3.0 charger screen lights up 5.2V, after 2 seconds, the voltage starts to rise automatically to 12, automatically drops to 3.6V, when pressing the UP or DP button, the voltage will be fixed at the current voltage value, no longer jump, and then press the button, the voltage will jump according to the change of 0.2V, then the QC3.0 test is completed.

 

6>> Note that when testing three fast charging protocols, QC3.0, MTK, and IWATT, the load must have a current of 500MA, otherwise the test will be interrupted.

Package Includes:

1 x USB Tester

Xiaomi Mijia Seabird 4K Sport Camera 2.01M 4K/30fps Support SDIO3.0

To Buy It Click Here

Description:

Name	4K/30 frame motion camera
Product color	Blue, green, orange
Master control	Hai Si Hi3559
Sensor	Sony
Pixel	12 million
Video resolution	4K/3Ofps, 2.7K/30fs 1080P/60fps, 1080P/30fps 720P/120fps, 720P/90fps 720P/60fps, 720P/30fps 480P/120fps, 480P/90fps 480P/60fps, 480P/30fps Video slow motion resolution 720P/120fps
Lens	F2.6 aperture / 7G / diameter 17.4mm
Field of view	MAX145°
Electronic image stabilization	Support 6-axis screw anti-shake
Memory card type	Micro sD card
Maximum support capacity	128GB
Type of battery	Lithium battery (1050mAh)
Battery life	90 minutes 4K/30 frame video recording
Power	2.3W
Video coding	H.264, H.265
Recommended SD card list	San Di Extreme U3 SanDis k Extreme PRo U3 SanDis k Extreme Plus U3 Lexa r 1000×U3 Son y SR64UXU3 Transcen d Ultimate633×U3
Size	60.5×42.2×29.7mm
Weight	60g (body only)

Package Included:
1 X Camera
1 X Battery
1 X USB Cable
1 X Instruction Manual

QC2.0 3.0 Type-C PD3.0 FCP AFC SCP MTK Fast Charge PD Protocol Controller Test Board USB Tester

To Buy It Click Here

Description:

Multi-function fast charge protocol  controller instructions:

 

The Controller code is as follows:

 

0000: monitor, only shows the current and voltage, do not fast charge control

0001: FCP, conducts Huawei FCP fast charging protocol control

0010: Fast Charge Agreement for SFCP Spreadtrum

0100: QC2.0

0101: Huawei SCP Super Fast Charge Protocol

0110: Enter PD mode
1000: QC3.0

1001: MTK1.1 must carry more than 500mA load to enable MTK fast charge control

1100: Samsung AFC Fast Charge Protocol

1101: MTK2.0, must carry more than 500mA load to carry out MTK fast charge control
 

How to use the DIP switch:

 

1. The DIP switch needs to be switched to the correct mode to work normally. All of them can be dialed 0000 to enter the monitor mode. In the monitor mode, the SWITCH button can be used to switch the fast charge protocol. Except for the typec PD protocol, the SWITCH button can be used. Switch

 

2. To test the PD protocol, you must dial the DIP switch to 0110, and then you must insert the C in typec port to test the PD protocol. After entering the PD test mode, the controller can read the PDO information of the source broadcast. And scrolling on the first line of the display;

 

3. Only after entering the corresponding fast charge protocol test mode, the “+” and “-” buttons can raise or lower the voltage;

 

4. Please note, in the fast charge test mode, the output terminal will have a voltage greater than 5V. Please ensure that the devices connected later can support voltages higher than 5V.

 

5. You can use the DIP switch to switch functions, or you can use the button to switch functions.

 

 Key Function:

 

"SWITCH": used to select the fast charge protocol

"-": reduce the voltage

"+": increase the voltage 
 

Note:

 

The PD function can only be accessed through the DIP switch.

Package Includes:

1 x USB Tester

Nitecore MH12GTS XHP35 HD 1800LM 5 Brightness Levels 3Modes USB Rechargeable LED Flashlight 18650

To Buy It Click Here

Specification:

Product name:	Nitecore MH12GTS LED Flashlight
Brand:	Nitecore
Model:	MH12GTS
Emitter Type:	XHP35 HD
Peak Beam Intensity:	12760 cd
Max Output:	1800 lumens
Range:	226m
Mode:	Turbo / High / Medium / Low / Ultralow / Strobe / SOS / Beacon
Lumens:	Turbo: 1800 lumens High: 900 lumens Medium: 240 lumens Low: 70 lumens Ultralow: 1 lumen Strobe: 1800 lumens SOS: 1800 lumens Beacon: 1800 lumens
Runtime:	30 min, 2 hr 15 min, 5 hr 45 min, 19 hr, 250 hr, --, --, --
Battery Configurations:	1x 18650 battery (>8A output) (Included)
Switch Type:	Clicky
Switch Location:	Side switch
Material:	Aluminium alloy 6061-T6, Mil-Spec HAⅢ Anodizing
Impact Resistance:	1m
Waterproof:	IPX8 (underwater 2m)
Reflector:	SMO
Lens:	Durable temperd glass with scratch resistant AR coating
Carrying Strap:	Lanyard
Color:	Black
Weight:	3.51oz
Size:	144 mm x 25.4 mm x 26mm (Length x Head Dia. x Tail Dia.)

Features:

1. Utilizes  XHP35 HD LED, with maximum output of 1800 lumens
2. Maximum peak beam intensity of 12670cd and maximum throw of 226m.
3. An optical system combined with crystal coating and "Precision Digital Optics Technology"(PDOT).

4. High effciency constant circuit provides stable output up to 250 hours.
5. The metal side switch controls 5 brightness  levels and 3 special modes.
6. A power indicator beneath the side switch indicates the remaining battery power.
7. The power indicator can also display the battery voltage(±0.1V).
8. Rigid double layer tube design.
9. Built-in charging via micro-USB port, so convenient to be charged at home or on the go.
10. NL1835HP 3500mAh 18650 rechargeable battery included.
11. Incorporated advanced temperature regulation module and electronic reverse polarity protection.

12. Optical lenses with double-sided scratch resistant coating.

13. Constructed from aero grade aluminum alloy with HA Ⅲmillitary grade hard-anodized finish.

14. Waterproof in accordance with IPX8 (2 meters submersible), and impact resistant to 1 meter.

Package Included: 
1 x Nitecore MH12GTS LED Flashlight
1 x 3500mAh 18650 Battery

1 x Lanyard
1 x Waterproof O-Ring
1 x USB Cable
1 x Holster
1 x Clip
1 x Tactical Ring