yllix

Please Like My Facebook Page

Monday, November 30, 2020

Saramonic Blink 500 B6 2-person Wireless Clip-on Mic System With Lavalier & USB-C Receiver For Android Devices & More

Saramonic Blink 500 B6 2-person Wireless Clip-on Mic System With Lavalier & USB-C Receiver For Android Devices & More


 

To Buy It Click Here 

 

Features:


The versatile sub-compact wireless transmitters that come with the Blink 500 B4 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podiums, or even used handheld. 

The Blink 500 B4 operates on the interference-free 2.4GHz spectrum and automatically hops channels to avoid static noise and audio dropouts.

The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. 

The RXDi receiver is small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people.

The Blink 500 B4 ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. 


Specifications:


Transmitter:

Frequency: 2.4GHz

Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)

RF Frequency Band: 2400 to 2483.5 MHz

RF Output Power: 10 mW

Signal to Noise Ratio: ≥70dB

Voice Delay: ≤6ms

Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)

Audio Gain Control: 11dB, 18dB, 25dB

Plug-In Power: Yes, 1V

Distortion: ≤0.1%

Digital Resolution: 24-bit / 48kHz

Frequency Response: 20Hz to 16kHz

Max Operating Range: 98.4ft (30m) with Obstacles, 164ft (50m) in Open Area

Max Number of Simultaneous Systems: 18 (up to 36 Microphones)

Antenna: Built-in 1/4λ Wire Antenna

Buttons: On / Off / Pair, Volume Up, Volume Down

Battery: Built-in Li-ion 3.7V / 400mAh

Approx. Battery Life: 5 hours

Charging Connector: USB Type-C (1.5 hours to be fully charged)

Input: 1/8in (3.5mm) Microphone Input

Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished

Microphone: Built-In Pressure Operated Electret Condenser

Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)

Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)

Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)

Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)

Mounting Clip: Built-In

Operating Temperature: 0℃ to 50℃

Storage Temperature: -20℃ to +50℃

Dimensions: 2.5 x 1.7 x 0.65in (63 x 43 x 16.5mm)

Weight: 1.2 oz (34g)


Receiver:

Frequency: 2.4GHz

Oscillator type: Gaussian Frequency-Shift Keying (GFSK)

RF Frequency Band: 2400 to 2483.5 MHz

Signal to Noise Ratio: ≥70dB

Voice Delay: ≤6ms

Distortion: ≤0.1%

Digital Resolution: 24-bit / 48kHz

Frequency Response: 20Hz to 16kHz

Max Operating Range: 98.4ft (30m) with Obstacles, 164ft (50m) in Open Area

Antenna: Built-in 1/4λ Wire Antenna

Connector: USB-C Male

Button: Pairing Pinhole Button

Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX

Operating temperature: 0℃ to 50℃

Storage temperature: -20℃ to +50℃

Dimensions: 3 x 0.65 x 0.43in (76 x 16.5 x 11mm)

Weight: 0.35 oz (10g)


Package Included:


2 x Blink 500 TX Transmitter with Built-In Microphone and Clip

1 x Blink 500 RXUC Dual-Receiver with USB-C Connector

2 x SR-M1 Omnidirectional Lavalier Microphone

2 x Alligator-Style Lavalier Microphone Clip

2 x Foam Lavalier Windscreen

2 x 1ft (30.5 cm) gold-plated USB-C to USB-A charging cable

1 x Pairing Pin

Saramonic Blink 500 B4 2-person Wireless Clip-on Mic System With Lavalier & Lightning Receiver For iPhone For iPad

 

Saramonic Blink 500 B4 2-person Wireless Clip-on Mic System With Lavalier & Lightning Receiver For iPhone For iPad


To Buy It Click Here

 

Features:


The versatile sub-compact wireless transmitters that come with the Blink 500 B4 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podiums, or even used handheld. 

The Blink 500 B4 operates on the interference-free 2.4GHz spectrum and automatically hops channels to avoid static noise and audio dropouts.

The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. 

The RXDi receiver is small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people.

The Blink 500 B4 ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. 


Specifications:


Transmitter:

Frequency: 2.4GHz

Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)

RF Frequency Band: 2400 to 2483.5 MHz

RF Output Power: 10 mW

Signal to Noise Ratio: ≥70dB

Voice Delay: ≤6ms

Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)

Audio Gain Control: 11dB, 18dB, 25dB

Plug-In Power: Yes, 1V

Distortion: ≤0.1%

Digital Resolution: 24-bit / 48kHz

Frequency Response: 20Hz to 16kHz

Max Operating Range: 98.4ft (30m) with Obstacles, 164ft (50m) in Open Area

Max Number of Simultaneous Systems: 18 (up to 36 Microphones)

Antenna: Built-in 1/4λ Wire Antenna

Buttons: On / Off / Pair, Volume Up, Volume Down

Battery: Built-in Li-ion 3.7V / 400mAh

Approx. Battery Life: 5 hours

Charging Connector: USB Type-C (1.5 hours to be fully charged)

Input: 1/8in (3.5mm) Microphone Input

Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished

Microphone: Built-In Pressure Operated Electret Condenser

Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)

Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)

Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)

Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)

Mounting Clip: Built-In

Operating Temperature: 0℃ to 50℃

Storage Temperature: -20℃ to +50℃

Dimensions: 2.5 x 1.7 x 0.65in (63 x 43 x 16.5mm)

Weight: 1.2 oz (34g)


Receiver:

Frequency: 2.4GHz

Oscillator type: Gaussian Frequency-Shift Keying (GFSK)

RF Frequency Band: 2400 to 2483.5 MHz

Signal to Noise Ratio: ≥70dB

Voice Delay: ≤6ms

Distortion: ≤0.1%

Digital Resolution: 24-bit / 48kHz

Frequency Response: 20Hz to 16kHz

Max Operating Range: 98.4ft (30m) with Obstacles, 164ft (50m) in Open Area

Antenna: Built-in 1/4λ Wire Antenna

Connector: MFi Certified Lighting Apple Lightnning Male

Button: Pairing Pinhole Button

Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX

Operating temperature: 0℃ to 50℃

Storage temperature: -20℃ to +50℃

Dimensions: 3 x 0.65 x 0.43in (76 x 16.5 x 11mm)

Weight: 0.35 oz (10g)


Package Included:


2 x Blink 500 TX Transmitter with Built-In Microphone and Clip

1 x Blink 500 RXDi Dual-Receiver with MFi Certified Apple Lightnning Connector

2 x SR-M1 Omnidirectional Lavalier Microphone

2 x Alligator-Style Lavalier Microphone Clip

2 x Foam Lavalier Windscreen

2 x 1ft (30.5 cm) gold-plated USB-C to USB-A charging cable

1 x Pairing Pin