DJI RoboMaster EP STEAM 4WD Brushless AI FPV APP Control Obstacle Avoidance RC Robot Arm Compatible Micro:bit Arduino Raspberry

To Buy It Click Here

Description:

Brand: DJI

Item: Robomaster EP

Product: Smart RC Robot Arm

Battery: 11.1V 3S 2400Mah Rechargable Lipo Battery

App Download: Click Here

Specifiction:

Infrared Sensor

Detection Zone: 0.1-10m

Detection FOV: 20 Degree

Measuring Precision: 5%

Robot Arm

Movement: Horizontal 0.22m/ Vertical 0.15m

Bearing: Dual

Gripper Opening: 10cm(max)

Servo

Weight: 70g approx.

Size: 44.2*22.6*28.6mm

Transmittion Ratio: 512

Working Mode: Angle/Speed Mode

Sensor Interchange Module

Interface Type: IO/AD Input

Interface Quantity: 2

Power

Conmunication Interface: CAN BUS*5

Input: TX30  12V

Ouput: USB Type-5 5V/2A,  TX30 12V/5A,  Pin Expansion 5V/4A

Camera

FOV:120°

Max Still Photo Resolution: 2560×1440

Max Video Resolution: FHD: 1920×1080  30P / HD: 1280 × 720 30P

Max Video Bitrate: 16 Mbps

Photo Format: JPEG

Video Format: MP4

Sensor: CMOS 1/4″; Effective pixels: 5 MP

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Narrow Infrared Units:

Effective Range [1]: 6 m (in indoor lighting conditions)

Effective Area: Varies from 10°to 40° 

Effective area decreases as distance from the target increases.

Wide Infrared Units:

Effective Range [1]: 3 m (in indoor lighting conditions)

Effective Width: 360° (in indoor lighting conditions)

Hit Detector:

Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.

Maximum Detection Frequency: 15 Hz

DJI Robomaster EP:

Weight: Approx.6kg

Dimensions:45.00 x 34.00 x 31.00 cm / 17.72 x 13.39 x 12.2 inches

Chassis Speed Range:

0-3.5 m/s (forward) 

0-2.5 m/s (backward) 

0-2.8 m/s (sideways)

Max Chassis Rotational Speed: 600°/s

M3508I Brushless Motor:

Max Rotational Speed: 1000 rpm

Max Torque: 0.25N*m

Max Output Power: 19 W

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Driver: FOC

Control Method: Closed-loop speed control

Protection: Overvoltage/Overtemperature/Soft-start/Short-circuit/Chip and sensor anomaly detection 

Control:

Controllable Launching Frequency: 1-8/s

Max Launching Frequency: 10/s

Initial Launching Speed: Approx. 26 m/s

Average Load: Approx. 430

Gimbal: 

Controllable Range: Pitch: -20° to +35°/ Yaw: ±250°

Mechanical Range: Pitch: -24° to +41° / Yaw: ±270°

Max Rotational Speed: 540°/s

Vibration Control (on the flat surface): ±0.02°

Intelligent Controller:

Latency (depending on environmental conditions and mobile device):

Connection via Wi-Fi: 80-100ms /Connection via Router: 100-120ms 

(unobstructed, free of interference)

Live View Quality: 720p/30fps

Max Live View Bitrate: 6 Mbps

Operating Frequency: 2.4 GHz, 5.1 GHz, 5.8 GHz

Operating Mode: Connection via Wi-Fi, Connection via Router

Max Transmission Distance (unobstructed, free of interference):

①Connection via Wi-Fi:

FCC, 2.4 GHz 140 m, 5.8 GHz 90 m

CE, 2.4 GHz 140 m, 5.8 GHz 70 m

SRRC, 2.4 GHz 130 m, 5.8 GHz 130 m

MIC, 2.4 GHz 140 m

②Connection via Router:

FCC, 2.4 GHz 180 m, 5.8 GHz 300 m

CE, 2.4 GHz 180 m, 5.1 GHz 100 m

SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m

MIC, 2.4 GHz 170 m, 5.1 GHz 180 m

Transmission Power (EIRP):

①2.400-2.4835 GHz 

FCC: ≤30 dBm 

SRRC: ≤20 dBm

MIC: ≤20 dBm

②5.170-5.25 GHz

FCC: ≤30 dBm 

SRRC: ≤23 dBm

MIC: ≤23 dBm

③5.725-5.850 GHz 

FCC: ≤30dBm 

SRRC: ≤30dBm

Transmission Standard: IEEE802.11a/b/g/n

Intelligent Battery:

Capacity: 2400 mAh

Nominal Charging Voltage: 10.8 V

Maximum Charging Voltage: 12.6 V

Battery Type: LiPo 3S

Energy: 25.92 Wh

Weight: 169 g

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Charging Temperature Range: 5 to 40 °C (41 to 104 °F)

Maximum Charging Power: 29 W

Battery Life in Use: 35 minutes (measured at a constant speed of 2 m/s on a flat surface)

Battery Life on Standby: Approx. 100 minutes

Charger:

Input: 100-240 V, 50-60Hz, 1A

Output Port: 12.6 V=0.8A or 12.6 V=2.2A

Voltage: 12.6 V

Rated Voltage: 28 W

App:

App: RoboMaster

iOS: 10.0.2 or later

Android: Android 5.0 or later

Router:

Recommended Routers:

TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China) 

TP-Link Archer C7; NETGEAR X6S (International)

Supported SD Cards:
capacity up to 64GB

Recommended outdoor power supply solution for routers: Laptop Power Bank (match the input power of the router)

DIY Assembly 4-Dof Robot Arm PS2 Handle & Circuit Kits for Arduino Mechanics

To Buy It Click Here

Features:
- DIY Assembled 4-dof Mechanics Handle Robot Arm for Arduino Learning Kits
- with 4 servo and 2 pieces PS2 handle
- Easy to control, the action of four servo controlled by the 2pcs PS2 handles;
- Heavy lifting is not recommended
- Can be used to test the servo motor coding for robotic engineers
- Suitable for arduino learning and controling theory of automatic robotic arm; guest space and students learning kits
- Also learn serial ports controlling servo and potentiometer controlling servo

Specification:
- Name: DIY Assembly 4-Dof Robot Arm PS2 Handle & Circuit Kits for Arduino Mechanics
- Material: Plastic+Metal

Package includes:
1 Set Robot Mechanical Arm Kits

LOBOT 6DOF Smart RC Robot Arm Tank Open Source Stick APP Control With Series Bus Servo & STM32 Board

To Buy It Click Here

Description:

Brand: LOBOT

Product: 6DOF RC Robot Arm

Speed: 0.27m/s(max)

Battery: 7.4V 2200mAh Lipo Battery

Voltage: 6.9-7.4V

Working Time: About 100mins

Charging Time: 3-4hrs

Controller: PS2 Stick

Bearing Weight: 0.5kg

Grab Weight: 0.22kg

Control Distance: About 10-15m

Body Height: 570mm

Length: 300mm

Width: 240mm

Weight: About 2160g

 

Features:

- Aluminous body, hard and durable.

- DIY design, free to assemble.

- Helps to develop logic thinking and operating abilities.

- With high quality digital servo, more sensitive.

 

Note: Package is not include the control glove, can order it here

 

Package:

1* Robot Car Kit

1* Servo Holder Set(with Servo)

1* STM32 Board

1* 7.4V 2200mAh Lipo Battery

1* Open Source Control Set

1* Ultrasonic Sensor

1* Voice Sensor

1* Tilt Sensor

1* 4-way Tracking Sensor

1* Bluetooth Module

1* USB Download Equipment

1* Charger

1* PS2 Stick

1* 7.4V 2200MAH Battery

1* Wire Set

1* Tool Set

1* Scerw Set

JJRC H49 SOL Ultrathin Wifi FPV Selfie Drone 720P Camera Auto Foldable Arm Altitude Hold RC Quadcopter RTF

To Buy It Click Here

JJRC H49 SOL Ultrathin Wifi FPV Selfie Drone 720P Camera Auto Foldable Arm Altitude Hold RC Quadcopter RTF

Description:
Brand Name: JJR/C
Item NO.: H49
Item Name: RC Quadcopter
Frequency: 2.4G  
Channel: 4CH
Gyro: 6 axis
Quadcopter Battery: Bulit-in 3.7V 250mAh (Included)
Transmitter Battry: 2 x 1.5V AAA Battery (Not Included)
Charging Time: About 45mins
Flying Time: 5-6mins
R/C Distance: 45m           
Color: Red
Camera: 720P
Material: Electronic Components,Plastic
Diagonal Length: 10.5cm
Quad's Size: 12.5x6.3x2.8cm (the arms not folded)
                       10x6.3x0.85cm (the arms folded)
Quad's Weight: 36g
Package Size: 16x9.2x5.3cm
Package weight: 250g

Features:
- With Auto Foldable Arm,one key open.
- Innovative selfie drone,720P camera allows you to get great selfies effortlessly.
- With Ultra-thin body and remote control, small size, easy to carry.
- With automatic folding design, just need to tap on both sides, and it will automatically eject the arms.
- With altitude hold mode function provides stable flight.
- With aerial photography beauty mode, let your photo looks more beautiful.
- Wifi real-time transmission FPV system which can capture photos and record videos for your great memory.
- With Headless Mode,no need to adjust the position of aircraft before flying .
- With One key return function makes it easily to find the way home.
- Can be controlled both by transmitter and Mobile phone.
- 2.4GHz Technology Adopted for Anti-Interference.
- 4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and rolling 360°.
- 6-axis gyro which can have more stable flying and be easy to control.
- It have 3-level flight speed to switch that can make more fun with the flying.
- It can realize 3D tumbling 360°rolling in four directions with 4 LED lights.
- The quadcopter fuselage is made of high strength and resistant engineering plastics,lightweight and durable resistance.

Function: Up/down, Forward/backward, Turn left/right, Sideward flight, LED Light, Headless Mode, One Key Automatic start/Return,H/L Mode

Package Included:
1 x JJR/C H49 RC Quadcopter
1 x 3.7V 250MAH Battery
1 x USB Cable
4 x Propeller
1 x Transmitter
1 x Screwdriver
1 x User Manual

Anniversary Sale Eachine E57 WiFi FPV Selfie Drone With 2MP 720P HD Camera Auto Foldable Arm Altitude Hold RC Quadcopter

To Buy It Click Here

Anniversary Sale Eachine E57 WiFi FPV Selfie Drone With 2MP 720P HD Camera Auto Foldable Arm Altitude Hold RC Quadcopter

Description:

Brand Name: Eachine

Item NO.: E57
Material: Electronic Components,Plastic

Frequency: 2.4G    

Channel: 4ch

Gyro: 6 axis

Quadcopter Battery: 3.7V 250mAh (Included)
Transmitter Battery: 2 x 1.5V AAA battery (Not Included)

Charging Time: About 45mins

Flying Time: 5-6mins

R/C Distance: 30m             

Color: Blue

Camera: 720P

Quad's Weight: 36g

Quad's size: 12.5x6.3x2.8cm (the arms not folded)

                      10x6.3x0.85cm (the arms folded)

                      10.5cm(Diagonal length)

Package Size: 16x9.2x5.3cm

Package Weight: 250g
 

Features:
- With Auto Foldable Arm,one key open.

- Innovative selfie drone,720P camera allows you to get great selfies effortlessly.

- With Ultra-thin body and remote control, small size, easy to carry.
- With automatic folding design, just need to tap on both sides, and it will automatically eject the arms.

- With altitude hold mode function provides stable flight.

- With aerial photography beauty mode, let your photo looks more beautiful.

- Wifi real-time transmission FPV system which can capture photos and record videos for your great memory.

- With Headless Mode,no need to adjust the position of aircraft before flying .

- With One key return function makes it easily to find the way home.

- Can be controlled both by transmitter and Mobile phone.

- 2.4GHz Technology Adopted for Anti-Interference.

- 4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and rolling 360°.

- 6-axis gyro which can have more stable flying and be easy to control. 

- It have 3-level flight speed to switch that can make more fun with the flying.

- It can realize 3D tumbling 360°rolling in four directions with 4 LED lights. 

- The quadcopter fuselage is made of high strength and resistant engineering plastics,lightweight and durable resistance.

 

Function: Up/down, Forward/backward, Turn left/right, Sideward flight, LED Light, Headless Mode, One Key Automatic start/Return,H/L Mode

 

Package Included:

1 x Eachine E57 RC Quadcopter

1 x 3.7V 250MAH Battery

1 x USB Cable

4 x Propeller

1 x Transmitter 

1 x Screwdriver

1 x User Manual

3.5X - 90X Articulating Arm Pillar Clamp Zoom Simul Focal Trinocular Stereo Microscope + 34MP Video Camera For Industrial PCB

To Buy It Click Here

Feature:

 

An excellent stereo inspection microscope with i'ntensity-adjustable 144-LED ring light

7x-45x super wide zoom magnification power

Bright cool light 144-LED illumination system

High resolution with great flatness and contrast, giving sharp and clear images

Binocular head with 45 degree inclined 360 degree swiveling eye tubes

Sharp stereo erect images with a wide field of view

Crystal clear original true color microscope images

Dual eye tubes with adjustable diopters

Large working distance

Sturdy all-metal table stand

Accurate alignment reduces eye strain for longer periods of viewing

Full optical glass elements

Precise ground glass lenses

Full metal chrome-plated mechanical components

Adjustable interpupillary distance

Rubber eye-guards included

 

Specification:

 

Image sensor: 34 21 16 14 12 10 8 5 3 megapixel P'anasonic CMOS sensor 1/2.33 inch

Effective pixel: 34 megapixel

Pixel size:1.335μm × 1.335μm

Frame rate:60fps

Definition:FULL HD

Housing:metal

Lens:C/CS

Video format: MP4

Digital Zoom:Support

Brightness control:Auto/manual

Color:R/G/B adjustable

Film and r'ecord:Support

Cross cursor:Support multi-color, size adjustable

Transverse and vertical line:

Support multi-color, 5 pcs of transverse lines/vertical lines, moveable

Different color,5 horizontal line , 5 vertical line,any positions

TF card interface:Max 64G

HDMI interface:Standard HDMI output (Type A)

USB interface:Standard usb2.0 interface (Type B)

Input Voltage: DC 12V

  

Expand the scope of operations,any orientation and angle observed the objectives.

Vertical Height : 400mm

Horizontal Distance:770mm

Base size: 98x80x116mm

Max Clamp:50mm

Steel Gears on Focusing Holder.

Standard Size Focusing Holder - Will Fit Scope Heads with Diameter of 76mm,Connection diameter of 16mm.

 

144 bright white LED bulbs

100,000 hours of life

Intense and focused shadow-free illumination

The brightness of 0-100%Adjustable,high brightness

Variable i'ntensity control

Power input: 100-240V, 50-60HZ

Suit for the dia of the lens: 30mm-160mm

 

Package Includes:

 

1 x Trinocular Stereo Zoom Head

1 x Pair of Super Widefield 10X20MM Eyepieces

1 x 144-LED Ring Light

1 x Focusing Rack

1 x C-mount Adapter

1 x 0.5X Microscope Auxiliary Objective Lens(Working Distance 165 mm)

1 x 1.0X Microscope Auxiliary Objective Lens(Protection function)

1 x 2.0X Microscope Auxiliary Objective Lens(Working Distance 40 mm)

1 x High Temperature Resistant Working Pad

1 x Articulating Arm Clamp Microscope Bracket

1 x HDMI  USB Video Camera

1 x HDMI Cable

1 x USB Cable

1 x 8GB TF card

1 x IR Remote control

1 x Power Supply Adapter (EU)

1 x SZMCTV 1/2 Lens

 

Note:

We will send you a plug adapter according to your country.

LOBOT uHandbit Micro:bit DIY Open Source Graphic Program APP Control RC Robot Arm Educational Kit

To Buy It Click Here

 

Description:

Brand: LOBOT

Product: uHandbit DIY Smart RC Robot Arm

Battery: 1* 18650 Lipo Batteries(included)

Using Time: Appro 90minds

Control: Micro:bit

Conmunication: USB, Bluetooth

Product Weight: 560g

Product Size: 250*205*120mm

Packing Size: 360*310*110mm

 

Features:

- Support APP/PC control.

- Support graphic program.

- With anti-block servo to protect robot arm better,

- Multifunctional, counting finger, ultrasonic grap, color recognition,etc.

 

Program Web:  https//makecode.microbit.org

 

Package:

1* Robot Arm Kit

1* Acrylic Kit

1* Micro:bit Board(freely choose)

1* Develop Board

1* Ultrasonic Sensor

1* Color Sensor

1* 18650 Battery

1* 6V 5A Adapter

1* USB Wire

2* 4PIN Wire

1* Screwdriver

1* LD1501MG Servo

1* Holder

JJRC H70 PLANC Attitude Hold Mini Drone With Foldable Arm Ultra-light RC Quadcopter RTF

To Buy It Click Here

JJRC H70 PLANC Attitude Hold Mini Drone With Foldable Arm Ultra-light RC Quadcopter RTF

Description:

Brand: JJRC

Item No: H70

Material: ABS

Channel:4CH

Motor: Brushed

Color: Blue/Red

Battery: 3.7V 350mAh 

Transmitter Battery:3XAAA batteries(not included)

Charging Time: about 50mins

Flight Time: 5mins

R/C Distance: About 40m

Package Size: 15.1*6.8*13.5cm

Product Size: 8.5*10.2*1.2cm

 

Features: Forward/Backward, Ascend/Descend, Turen left/ Right, Left/Right Sideward, Headless Mode, Return To Home, Attitude Hold, High/Low Speed Mode

 

Functions:

1.Click-in Battery: The removable battery is ocnvenient for charging and safe to use.

2.Attitude Hold- Equipped with advanced barometer sensor,the drone is able to carry out the stable and steady hovering flights

3.Return To Home: Just press the one key return button, the drone would return to home automatically

4.Headless mode:no need to adjust the position of aircraft before flying.

5.High/Low Speed Mode: A newbie or master, you can fly the drone at your desired speed with three different speed modes available.

6.Luminous/Navigation Light: The night navigation light enables night flight.

 

Package Included:

1 x RC Drone

1 x Transmitter

1 x 3.7V 350mAh Lipo Battery

1 x USB Charger

4 x Propeller

1 x Screwdriver

1 x Manual

LOBOT 6DOF Smart RC Robot Arm Open Source Stick Control With Digital Servo & Arduinos Board

To Buy It Click Here

 

Description:

Brand: LOBOT

Product: 6DOF RC Robot Arm

Speed: 0.27m/s(max)

Battery: 7.4V 2200mAh Lipo Battery

Voltage: 6.9-7.4V

Working Time: About 100mins

Charging Time: 3-4hrs

Controller: PS2 Stick

Bearing Weight: 0.5kg

Grab Weight: 0.22kg

Body Height: 570mm

Length: 300mm

Width: 240mm

Weight: About 2160g

 

Features:

- Aluminous body, hard and durable.

- DIY design, free to assemble.

- Helps to develop logic thinking and operating abilities.

- With high quality digital servo, more sensitive.

Note: ultrasonic and tracking sensor are not inluded

 

Package:

1* Robot Car Kit

1* Servo Holder Set

1* A-rduino board

2* LFD-06 Servo

2* LDX 218 Servo

1* LDX-335MG Servo

1* LD-1501 Servo

1* 7.4V 2200mAh Lipo Battery

2* DC Motor

1* Charger

1* PS2 Stick

XIAO R Avatar Raspberry Pi 3B+ DIY 6DOF Metal RC Robot Arm Car Programmable APP PS2 Handle Control

To Buy It Click Here

Software link: http://www.xiao-r.com/index.php/Download/download
                         http://120.24.65.205:8888/xrsoftware 

Description:
Brand: XIAO R
Product: 6DOF DIY RC Robot Arm
Main Board: Raspberry Pi 3B+
Power by: 12V 2200mAh Lipo Battery (included)
Control: PS2 Handle / APP / PC
Chassis Size: 300*240*125mm
Turntable Size: 75mm( height)  120mm(diameter)
Arm length: 370mm
Wireless communication: 802.11b/g/n

Features:
- Full metal chassis, durable and high-end.
- Programmable, players are encouraged to program it youself.
- Support various kinds of controlling method, PS2 handle, APP, PC.
- With 180° large torque servo.
- With external 2DBi  antenna, better to receive the signal.

Package:

1* Metal Chassis

1* turntable

2* XR 9G Servo

1* 2200mAh Battery

1* Accessory Bag

1* Raspberry Main Board

1* Wifi Module

1* PS2 Handle

1* 2DBi Antenna

1* Charger

1* 6DOF Robot Arm

1* Servo Wire

7Dof PS2 Control/WiFi Robot Arm Car Mobile Platform DIY Kit with Wifi Model/PS2 Controller/Motor Driver Board for Arduino

To Buy It Click Here

Please choose the version you want
Set 1 = Handle version (not included wifi modele)
Set 2= Wifi version (not included handle controller)

Features:

 

● Compatible with arduino;

● Simultaniously control 4ch DC motor and 16ch servo;You can control 2wd car or 4wd car.

● Product kit with handle control version, to realize the dream of DIY smart car.

● A combination of a smart car and a robotic arm that simultaneously implements to get hands-on more experience.

● Control modes: Can controlled by wifi (DT-06) and PS2 station. You can add the handle receiver on the driver board, so that you can control the car via handle.
  Also can add the wifi module or bluetooth mudule on the driver board, so that you can control the car via moboie phone.

 

File about product:

1. wiki about 4 road motor&16 road servo driver board
2. wiki information about 9v motor 
3. SourceCdoe
4. App

Specifications:

- Material: Metal frame & aluminum alloy wheels
- Color: black
- Assembled car size: 300*240mm(L*W); highest size:122mm
- Motor: Dual 9v motor with Hall sensor(package Included)
- Servo: 996 servos(package Included)
- Package Weight: about 3.5KG

- Module pin description and schematic:

 - 16 road servo and 4 road motor drive board, using TB6612 4 road drive, PCA9685 for 16 road servo control.

 - Bring out the Arduino UNO I/O pin;

 - The maximum input voltage of the power supply is 15V/DC;

 - Reserve Bluetooth & WIFI module sockets;

 - Reserve PS2 handle socket;

 - 4 road DC motor drive, single-channel maximum drive current 1.2A average / 3.2A peak;

 - 16 road servo drive pin, the power supply can be switched by the external/internal power supply of jumper cap;

Note: Set 1 & Set 2 all include Arduino board, 1 x Smart car, 1 x Robot arm, dual motors and 996 servos.

Pacakge Included: 

1 x Set 1 (Handle controller version)
1 x Set 2 (wifi version)

220V 3KW Battery Spot Welding Machine Extended Arm Welding Machine with Pulse & Current Display

To Buy It Click Here

Technical Parameters:

Input power: AC 220V

Output power: 3KW

Welding current: adjustable from 01-99%

Pulse adjustment: 01-06 adjustable

Delay adjustment: 01-99 adjustable

Package weight: about 6KG

Body size: 183*164*130MM (mm)

Welding thickness: suitable for nickel or steel sheets of ≤0.15MM.

Applicable objects: mobile power. Charging treasure / laptop battery / digital battery pack / power tool battery pack / electric car battery pack modification and maintenance. Support 18650 and other cylindrical batteries or polymer batteries (after nickel) welding.

Package Included:

1 x Spot welding machine

1 x Battery holder

1 x Hex wrench

6 x Welding needle

2 x Fuse tube

100 x Nickel sheet (0.1x4x100mm)

LOBOT Micro:bit Armbit Smart RC Robot Car Arm Robot Graphic 3 Modeling APP Control

To Buy It Click Here

Description:

Brand: LOBOT

Product: Smart RC Robot Car

Programming System: micro:bit(Graphinical/ JavaScript)

Communication interface: USB/Bluetooth

Control: micro:bit

Power: 2* 3.7V Lipo Batteries(included)

Working Time: 3 hrs

Packing Size:145*230*220mm

Weight: About 1kg

 

Features:

- 3 modeling,change the appearance at anytime youself.

- Design With micro:bit board, can be programed.

- WIth multiple playing method micro;bit board.

Programming Web: https://makecode.microbit.org/

 

Package:

1* Robot Kit

1* Micro:bit Main Board

1* Micro:bit Expansion Board

2* 3.7V Lipo Batteries

2* DC Motors

4* Servos

2* Clawer Belt

1* Ultrasonic Sensor

1* Color Sensor

1* Charger

1* USB Wire

1* Grayscale Sensor

1* Screw Set

JE2000-7000 Fishing Reel Aluminum 5.2:1 Metal Spool Folding Arm Left Right Spinning Fishing Tool

To Buy It Click Here

Description:
JE2000-7000 Fishing reel aluminum 5.2:1 gear ratio, metal spool folding arm left right spinning fishing tool.

Specification:
Material: Aluminum
Gear Ratio: 5.2:1
Model: JE2000,JE3000,JE4000,JE5000,JE6000,JE7000
Model / Line diameter(mm)/Winding length(m) / LBS/YDS
1#: JE2000 - 0.15/180 0.18/140 0.20/120 - 4/200 6/160 8/100
2#: JE3000 - 0.18/240 0.20/200 0.25/140 - 6/220 8/160 10/100
3#: JE4000 - 0.20/240 0.25/200 0.30/140 - 8/200 10/160 12/120
4#: JE5000 - 0.30/200 0.35/160 0.40/120 - 12/180 14/140 16/100
5#: JE6000 - 0.40/155 0.45/125 0.50/100 - 12/200 15/165 18/145
6#: JE7000 - 0.45/180 0.50/145 0.60/100 - 15/240 18/205 20/118

Features:
- Ultra-thin body design, beautiful, light weight and convenient.
- High strength engineering material, strong and durable.
- High strength folding arm, can be interchanged.
- Two kinds of color forging line cup. Exhaust hole design.
- Aluminum spool.
- Titanium coated anti-twist line roller.
- Machine cut brass pinion gear.
- Micro-sensitive multi-drag system.
- Computerised balanced system.
- Large diameter line roller.
- Perfectly balanced rotor system.

Package Included:
1 x Fishing Reel

XIAO R 4-DOF Manipulating Robot Arm Grob Gripper 180° Rotation With 995 Servo

To Buy It Click Here

Description:

Brand: XIAO R

Product: 4-DOF Robot Arm

Operating Voltage: 4.8-6V

Rotating Angle: 180°

Operating Torque: 13kg/cm

Operating Speed:

1) 0.17sec/60° (4.8V Unload)

2) 0.13sec/60° (6V Unload)

Operating Temp: -30℃~60℃

Dead Band: 4us

 

Features:

- It can be assembled at anytime if you are interested in DIY.

- It suitable for various kinds of RC models.

 

Package:

1* Gripper

4* 995 Servos

4* Servo Holder

6* Support

1* Screw set

Hellobot DIY Programming Robot Microbit Educational Kits Arm Forklift Gripper Smart Robot Car

To Buy It Click Here

Description:

Brand: Hellobot

Product: Programming Robot

Appearance: Arm Version, Lift Pack, Clip Pack

Power: Lipo Battry

 

Features:

- Three kinds of appearance: Arm Version, Lift Pack, Clip Pack.

- The robot is designed with innovative networking that allows multiple robots to be connected in one click to complete synchronized actions

- Graphic programming. Intelligent dedicated micro:bit building block function library is provided, matching the various functions of this smart car.

- The development board comes with bluetooth 4.0 function to support to connect with each other automatically.

- Supports to DIY at anytime and including much fun games.

Packaging:
1* Hellobot Programming Robot Set ( see the details on the pics)

DIY Colorful Mechanical Robot Arm Kit with Infrared Controller Metal Servo for Arduino

To Buy It Click Here

Feature:

 

1.Graphical programming

2.Double rocker control

3.Arduino open source

4.Action recording

5.Automatically play

 

Specification:

 

Height of the robot arm:20cm

Width of the robot arm: 34.5cm

Control: Infrared control

 

Packaging included:

 

1X robot arm kit 

1X metal servo

1X arduino board

1X Rocker

1X battery box

1X Infrared control

1X Infrared servo

1X Screw pack

DIY Flexible Third Hand Six Arm PCB Maintenance Fixture FPV RC602 Soldering Station Tool with USB Fans

To Buy It Click Here

Features:
 

You can finish the soldering much faster and easier.

The arms are flexible and can turn into different shapes.

Very easy to install and uninstall.

Suitable for soldering RC models accessories, racing FPV drone component.

 

Specification:
 

Product Name: Six arm soldering tool

Aluminum alloy base color: Black

Material: Plastic

Aluminum alloy base: 133mm x 14mm

Universal joint pipe length: 295mm (Alligator clip included)

Arm: 6 Arms

Application: For For FPV RC602

 

Fan

Rated voltage: DC 5V

Current value: 0.1A

Power consumption: 0.5W

Revolution: 7000 +/- 10% RPM

Noise: 20 DBA

Wind speed: 1.5m / s

Air volume: 1.55CFM

Size: 30 x 30mm

USB cable length: 1000mm

 

Package included:
 

1 x Aluminum Alloy Base

6 x Universal Joint Tube

1 x USB Fan

EZT® T1-Plus 3D Printer Kit with TFT3.5" Color Touch Screen/ARM 32-bit Mainboard Support Intelligent Leveling/Multi-Language Swich

To Buy It Click Here

Features:

1. The T1-Plus is an upgraded version of the T1. The design of the motherboard has been improved, the accuracy is higher, and the sense of use is smoother.
2. With TFT3.5" color touch screen, It's clearer and easier to operate
3. Φ180 (circle diameter) × 320mm printing size
4. Support multi-language swich, 6 or more languages to choose from without worrying about language conversion.
5. ARM 32-bit controller motherboard, upgraded mianboard for use.
6. Support Intelligent leveling, it's easy to adjust balance.
7.  10m filament for free included in the product package.

Specifications
Model	T1 PLUS
Print Size	Φ180 (circle diameter) × 320mm
Product forming size	350*700mm
Engraving Accuracy	0.1mm
Frame material	Aluminium Extrusion
Platform board	Aluminum Alloy
Print Speed	20-80mm/s
Nozzle quantity	Single
Nozzle diameter	0.4mm
Nozzle temperature	170 - 270 Degree Celsius
Filament Diameter	1.75mm
LCD Display	TFT3.5"
Filament Support	ABS/PLA/TPU/Wood/Nylon/ PVA/PP/Luminescent etc.
Recommend Temp	ABS: Nozzle:230 °C    Hot Bed: 80 °C
	PLA: Nozzle:210 °C   Hot Bed: 50 °C
Printing Precision	0.1-0.2mm
Layer Thickness	0.1-0.4mm
Precision	Z axis: 0.004mm;  XY axis: 0.012mm
Control Temp	Extruder: Max:260 °C
	Hot Bed:50-100 °C
Host computer software	Repetier-Host,Cura
Printing Format	.STL/.OBJ/G-code
System Compatibility	Windows XP/Win7/Win8/Linux/
Operation Interface	Chinese/English/Russian/German/Spanish/French/ and other multi-language switch
Memory card offline print	SD card
Model supporting function	Yes
Power	100~250V, 200W
Certificate	CE,RoHs,CCC,EMC,FCC,GS
Power Supply	Plug EU Standard(Default)

Package Included:

1 x T1-Plus 3D Printer Kit
1 x 10m filament