Specification:
| Brand | Ortur |
| Model Number | Laser Master 2 pro S2 |
| Type | Laser Engraving Machine |
| Material | Aluminum + Powder Coated Steel |
| Laser Power | LU2-4 Compressed Focal Spot Laser Module 20w（Electrical Power：20W, Luminous Power: 5000-5500mw） |
| Laser Reaching Range | 445 ± 5nm |
| Power By | Power Adapter 24V 2A |
| Package Weight | 4.6 000 kg |
| Product size (L x W x H) | 600x570x189mm |
| Package size (L x W x H) | 660x250x110mm |
Main Features:
1. ●Specialized Motherboard with 32Bits MCU
- It could preprocess 32 instructions, support baud rate as high as 921600, more powerful!
2. The Most Advanced 32Bits Laser Engraver Firmware
- Ortur laser master firmware, smarter, faster, higher precision and easier to use.
3.
Laser power range could be S0 - S1000, compared to 8bits desktop laser
engravers, which only has S0 - S255, Ortur Laser Master could control
laser beam more accurately, could even use the high power laser unit to
"draw" a picture on paper , that the 8bits high power laser engravers
could not do.
4. Engraving speed could be as
high as 3000MM/Min. ( If do not consider the laser carving result, the
velocitys of movement could be as high as 1000MM/S )
5. Active Position Protection
- There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.
6. Laser Beam Safety Guard
-
If your computer system halted or USB cable disconnected, led to that
the laser engraver stops moving, the laser beam will stop, to prevent
fire.
7. Exposure Duration Detection and Limitation
-
If laser engraver is under control, but users forget to operate and
keep the laser beam working, extra safety will cut off in case the motor
stopped moving, to prevent fire.
8. LaserGRBL (
free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most
popular carving software in the world, could import different format
images, you could editing in PhotoShop, Inkscape, CAD, etc. and then
connect to the engraver via laser LaserGRBL for engraving and cutting.
9.
LightBurn ( paid software, lightburnsoftware.com ) supports Windows,
Macs OS, and Linux. It's the most popular paid carving software in the
world, very easy to use.
10. This laser engraver supports PWM mode.
11. Pre-assembled parts, just need 10 - 20 minutes to install the machine.
12. 400 x 430 mm large engraving area.
13. Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance.
14. Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.
Note:
● Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
●
The light engraving machine can not be directly applied to any mirror
reflecting object, which may cause injury to the operator or burn the
laser.
● This product is not recommended for industrial cutting due to its high engraving speed.
Package Contents:
1 x Laser Engraving Machine
