DJI RoboMaster EP STEAM 4WD Brushless AI FPV APP Control Obstacle Avoidance RC Robot Arm Compatible Micro:bit Arduino Raspberry

To Buy It Click Here

Description:

Brand: DJI

Item: Robomaster EP

Product: Smart RC Robot Arm

Battery: 11.1V 3S 2400Mah Rechargable Lipo Battery

App Download: Click Here

Specifiction:

Infrared Sensor

Detection Zone: 0.1-10m

Detection FOV: 20 Degree

Measuring Precision: 5%

Robot Arm

Movement: Horizontal 0.22m/ Vertical 0.15m

Bearing: Dual

Gripper Opening: 10cm(max)

Servo

Weight: 70g approx.

Size: 44.2*22.6*28.6mm

Transmittion Ratio: 512

Working Mode: Angle/Speed Mode

Sensor Interchange Module

Interface Type: IO/AD Input

Interface Quantity: 2

Power

Conmunication Interface: CAN BUS*5

Input: TX30  12V

Ouput: USB Type-5 5V/2A,  TX30 12V/5A,  Pin Expansion 5V/4A

Camera

FOV:120°

Max Still Photo Resolution: 2560×1440

Max Video Resolution: FHD: 1920×1080  30P / HD: 1280 × 720 30P

Max Video Bitrate: 16 Mbps

Photo Format: JPEG

Video Format: MP4

Sensor: CMOS 1/4″; Effective pixels: 5 MP

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Narrow Infrared Units:

Effective Range [1]: 6 m (in indoor lighting conditions)

Effective Area: Varies from 10°to 40° 

Effective area decreases as distance from the target increases.

Wide Infrared Units:

Effective Range [1]: 3 m (in indoor lighting conditions)

Effective Width: 360° (in indoor lighting conditions)

Hit Detector:

Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.

Maximum Detection Frequency: 15 Hz

DJI Robomaster EP:

Weight: Approx.6kg

Dimensions:45.00 x 34.00 x 31.00 cm / 17.72 x 13.39 x 12.2 inches

Chassis Speed Range:

0-3.5 m/s (forward) 

0-2.5 m/s (backward) 

0-2.8 m/s (sideways)

Max Chassis Rotational Speed: 600°/s

M3508I Brushless Motor:

Max Rotational Speed: 1000 rpm

Max Torque: 0.25N*m

Max Output Power: 19 W

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Driver: FOC

Control Method: Closed-loop speed control

Protection: Overvoltage/Overtemperature/Soft-start/Short-circuit/Chip and sensor anomaly detection 

Control:

Controllable Launching Frequency: 1-8/s

Max Launching Frequency: 10/s

Initial Launching Speed: Approx. 26 m/s

Average Load: Approx. 430

Gimbal: 

Controllable Range: Pitch: -20° to +35°/ Yaw: ±250°

Mechanical Range: Pitch: -24° to +41° / Yaw: ±270°

Max Rotational Speed: 540°/s

Vibration Control (on the flat surface): ±0.02°

Intelligent Controller:

Latency (depending on environmental conditions and mobile device):

Connection via Wi-Fi: 80-100ms /Connection via Router: 100-120ms 

(unobstructed, free of interference)

Live View Quality: 720p/30fps

Max Live View Bitrate: 6 Mbps

Operating Frequency: 2.4 GHz, 5.1 GHz, 5.8 GHz

Operating Mode: Connection via Wi-Fi, Connection via Router

Max Transmission Distance (unobstructed, free of interference):

①Connection via Wi-Fi:

FCC, 2.4 GHz 140 m, 5.8 GHz 90 m

CE, 2.4 GHz 140 m, 5.8 GHz 70 m

SRRC, 2.4 GHz 130 m, 5.8 GHz 130 m

MIC, 2.4 GHz 140 m

②Connection via Router:

FCC, 2.4 GHz 180 m, 5.8 GHz 300 m

CE, 2.4 GHz 180 m, 5.1 GHz 100 m

SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m

MIC, 2.4 GHz 170 m, 5.1 GHz 180 m

Transmission Power (EIRP):

①2.400-2.4835 GHz 

FCC: ≤30 dBm 

SRRC: ≤20 dBm

MIC: ≤20 dBm

②5.170-5.25 GHz

FCC: ≤30 dBm 

SRRC: ≤23 dBm

MIC: ≤23 dBm

③5.725-5.850 GHz 

FCC: ≤30dBm 

SRRC: ≤30dBm

Transmission Standard: IEEE802.11a/b/g/n

Intelligent Battery:

Capacity: 2400 mAh

Nominal Charging Voltage: 10.8 V

Maximum Charging Voltage: 12.6 V

Battery Type: LiPo 3S

Energy: 25.92 Wh

Weight: 169 g

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Charging Temperature Range: 5 to 40 °C (41 to 104 °F)

Maximum Charging Power: 29 W

Battery Life in Use: 35 minutes (measured at a constant speed of 2 m/s on a flat surface)

Battery Life on Standby: Approx. 100 minutes

Charger:

Input: 100-240 V, 50-60Hz, 1A

Output Port: 12.6 V=0.8A or 12.6 V=2.2A

Voltage: 12.6 V

Rated Voltage: 28 W

App:

App: RoboMaster

iOS: 10.0.2 or later

Android: Android 5.0 or later

Router:

Recommended Routers:

TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China) 

TP-Link Archer C7; NETGEAR X6S (International)

Supported SD Cards:
capacity up to 64GB

Recommended outdoor power supply solution for routers: Laptop Power Bank (match the input power of the router)

Xiao R GFS DIY Smart Programmable RC Robot Car Wifi Bluetooth APP Stick Control With HD Camera Raspberry Pi 4B Board

To Buy It Click Here

Description

Brand: XIAO R

Name: DIY WiFi Smart Robot for Raspberry Pi 4B Version

Motor: L298P 2 way power motor clip

Main Board: for Raspberry Pi 4B(built-in wifi and bluetooth 5.0 module)

Battery: 7.4V 2200mAh battery (included)

Frequency Range:2.400-2.4835GHz

Camera: Focal Length Adjustable

Compiling environment:C/Python/Scratch

Wireless communicate: support 802.11b/g/n protocol(Max 150Mbps)

Signal Range:≤ 80m

Control way: IOS app/Android app/PC

Weight: About 850g(whole package: About 1000g)

Size: 255*160*160mm

 

Features:

- Support APP/PC/Stick control;

- Suppport C/Python/Scratch graphic program;

- With 2DOF HD camera, support real-time monitoring;

- With powerful 2200mah lipo battery, using time is up to 120-180mins;

- Support to DIY other parts.

 

Note: the robot car is unassembled, package is not included the stick.

 

Manual: Click here

 

Package:

1x Raspberry Pi 4B Board
1x Power Strip

1x HD Camera

4x Rubber Wheels

4x TT Motor

2x Servo

1x Car Chassis Board

1x Manual

1x Charger

1x USB line

1x Battery

1x Screws set

LOBOT Alienbot Raspberry Micro:bit Programmable PC Stick Control Face Recognition Smart RC Robot With Camera

To Buy It Click Here

Description:

Brand: LOBOT

Product: DIY RC Robot

Materials: Metal+Glass Fiber+Electronic Components

Battery: 7.4V 2200mAh Lipo Batteries(included)

Using Time: 60mins

Camera: 480P

Ultrasonic Ranging: 4-200cm

Servo: LDX-824 Digital Servo

Torque: 17kg.cm@6.8V

Servo Size: 39.82*20.09*51.1mm

PTZ Rotation: 360°

Leg Length: 16cm

Body Length: 11.5cm

Body Width: 10.5cm

 

Features:

- Support stick/PC control.

- Raspberry open source, support to program it yourself.

- Aluminous and glass fiber materials, loss its weight and make it to move flexibly.

- Multifunctional, support tracking line, face recognition,color recognition, etc.

 

Package:

1* Robot Kit

1* Rasberry Pi 3b+ Board

1* Develop Board
1* Battrey

1* PS2 Stick Set

1* USB Wire

8* LX-824 Serial Bus Servo

1* Screwdriver

1* Charger

1* Camera

3* Servo Wire

LOBOT Alienbot Raspberry Micro:bit Programmable PC/Stick Control Face Recognition Smart RC Robot With Camera

To Buy It Click Here

Description:

Brand: LOBOT

Product: DIY RC Robot

Materials: Metal+Glass Fiber+Electronic Components

Battery: 7.4V 2200mAh Lipo Batteries(included)

Using Time: 60mins

Camera: 480P

Ultrasonic Ranging: 4-200cm

Servo: LDX-824 Digital Servo

Torque: 17kg.cm@6.8V

Servo Size: 39.82*20.09*51.1mm

PTZ Rotation: 360°

Leg Length: 16cm

Body Length: 11.5cm

Body Width: 10.5cm

 

Features:

- Support stick/PC control.

- Raspberry open source, support to program it yourself.

- Aluminous and glass fiber materials, loss its weight and make it to move flexibly.

- Multifunctional, support tracking line, face recognition,color recognition, etc.

 

Package:

1* Robot Kit

1* Rasberry Pi 3b+ Board

1* Develop Board

1* PS2 Stick Set

1* USB Wire

8* LX-824 Serial Bus Servo

1* Screwdriver

1* Charger

1* Camera

3* Servo Wire

XIAO R Raspberry 3B+ DIY Smart RC Robot Car Patrol App Control Educational Kit With HD Camera

To Buy It Click Here

Description:

Brand: XIAO R

Product: RC Robot Car

Power: 7.4V 2200mAh Lipo Battery

Main Board: Raspberry 3B+

Engine: Engine TT

Weight: About 1200g

 

Features:

- With Raspberry 3B+ main board.

- DIY design, free to assemble at any time.

- APP Control, easy to operate.

- With HD camera, support to track.

 

Package:

1* Robot Car Kit(as pics shown)

XIAO R Avatar Raspberry Pi 3B+ DIY 6DOF Metal RC Robot Arm Car Programmable APP PS2 Handle Control

To Buy It Click Here

Software link: http://www.xiao-r.com/index.php/Download/download
                         http://120.24.65.205:8888/xrsoftware 

Description:
Brand: XIAO R
Product: 6DOF DIY RC Robot Arm
Main Board: Raspberry Pi 3B+
Power by: 12V 2200mAh Lipo Battery (included)
Control: PS2 Handle / APP / PC
Chassis Size: 300*240*125mm
Turntable Size: 75mm( height)  120mm(diameter)
Arm length: 370mm
Wireless communication: 802.11b/g/n

Features:
- Full metal chassis, durable and high-end.
- Programmable, players are encouraged to program it youself.
- Support various kinds of controlling method, PS2 handle, APP, PC.
- With 180° large torque servo.
- With external 2DBi  antenna, better to receive the signal.

Package:

1* Metal Chassis

1* turntable

2* XR 9G Servo

1* 2200mAh Battery

1* Accessory Bag

1* Raspberry Main Board

1* Wifi Module

1* PS2 Handle

1* 2DBi Antenna

1* Charger

1* 6DOF Robot Arm

1* Servo Wire

DIY A-18 4WD Smart Robot Car Chassis Kit For Arduino Raspberry Pi

To Buy It Click Here

Description:
Product: DIY 4WD Smart Robot Car Chassis
Item: a-18
Voltage: DC 6-12V
Unload Current: 100mA
Unload Speed: 170-350 rounds/min
Color: Black
Material: Metal+Rudder
Weight: About 848g
Application: RC Robot Car

More information, please click here!

Package:
1* a-18 DIY 4WD Smart Robot Car Chassis Kit

USB Duplex MMDVM Hotspot Support P25 DMR YSF NXDN Pi + Raspberry Pi + 2pcs Antenna + OLED + Case + 8G TFT Card

To Buy It Click Here

Features: 

- USB port design

- High performance 32-bit ARM processor

- Fully tested

- Supports DMR, P-25,D-Star and System Fusion

- Onboard LEDs to show status (Tx,Rx,PTT,Mode)

- Up to 10mW RF power

- SMA antenna connector,Antenna included

- Mounts cleanly on all current Raspberry Pi's including the Pi Zero

- The firmware is pre-loaded and is easily upgraded via software.

- Open source 3D printable case available

- Uhf 430-450 MHz,433mhz and 900MHz

VHF 144 220 Opera FREQ

Install the firmware with bootloader support for USB connection

If you want to use the device via USB port you have to install a bootloader and build the firmware with bootloader support. As the raw device cannot be used with USB you have to use a USB-serial adapter or STlink device

The upper part is TX,the lower is RX antenna.
UHF+VHF
SMA,antenna
Modem select: STM32_HS_GPIO
Set TX frequency,RX frequency
TX,RX frequency had better 10M or more apart.
SLOT1,SLOT2 support.

Specifications:

Color: Black/Transparent

Material: PCB+Acrylic

Size: 65*75*20mm

Note: 

- The firmware is pre-loaded. Please do not upgrade the firmware by yourself.

Package Included: (Fully assembled and tested Jumbo-Spot-RTQ)

1x OLED display 

1x Raspberry pi zero 

1x MMDVM HotSPOT Module

1x 8G TFT card 

1x Case 

2x 433Mhz antenna

Duplex MMDVM Hotspot Support P25 DMR YSF + Raspberry Pi Zero + 2pcs Antenna + OLED + Exclouse Case

 

To Buy It Click Here

Features: 
 

- High performance 32-bit ARM processor

- Fully tested

- Supports DMR, P-25,D-Star and System Fusion

- Onboard LEDs to show status (Tx,Rx,PTT,Mode)

- Up to 10mW RF power

- SMA antenna connector,Antenna included

- Mounts cleanly on all current Raspberry Pi's including the Pi Zero

- The firmware is pre-loaded and is easily upgraded via software.

- Open source 3D printable case available

- Uhf 430-450 MHz,433mhz and 900MHz

The upper part is TX,the lower is RX antenna.
UHF+VHF
SMA,antenna
Modem select: STM32_HS_GPIO
Set TX frequency,RX frequency
TX,RX frequency had better 10M or more apart.
SLOT1,SLOT2 support.

Specifications:

Color: Black/Transparent

Material: PCB+Acrylic

Size: 65*75*20mm

Note: 

- The firmware is pre-loaded. Please do not upgrade the firmware by yourself.

Package Included: (Fully assembled and tested Jumbo-Spot-RTQ)

1x OLED display 

1x Raspberry pi zero 

1x MMDVM HotSPOT Module

1x 8G TFT card 

1x Case 

2x 433Mhz antenna

4WD Wireless WIFI Video Robot Car Kit for Raspberry Pi 3B/3B+ Support Programming/Bluetooth 4.0+Wifi/Remote Control with 2DOF Camera Pan/Tilt & 4Pcs Motor

To Buy It Click Here

Features:

1. The raspberry pi smart car set learning, entertainment, programming, DIY in one.

2. 4WD smart car adopts a free welding installation, a screwdriver can complete the assembly of the whole vehicle and brings a better sense of user experience.

3. 2DOF camera pan/tilt, Flexibly control the rotation of camera clouds up and down via mobile or mouse. It can also support 5G & wifi network

4. Real-time transmission of high definition video: HD camera, 480P resolution, manual adjustment of focal length, support the output of two formats: MJPEG, YUYV(default).

5. 4WD smart robot shield also support four popular controllers; Arduino UNO, Raspberry PI, STM32, 51mcu. 

6. Can support 2018 latest Raspberry Pi 3B+, better performance, smoother picture

7. Support programming language and Python. Support Bluetooth 4.0 + wifi dual communication.

8. Provide download links about the product for reference.

9. Equipped with Raspberry Pi board, can be connected directly to the wifi hotspot

10. Powerful hardware configuration, four pcs DC motor, aluminum chassis, metal motor mount and  BST-4WD expansion board, etc.


The data download link for you reference, please click:

*  Bluetooth remote control APK: Download 

* Yabo intelligent host computer v2.0 installation package.rar: Download
   Instructions for use:
    1. Connect to the Raspberry Pi wifi hotspot using your computer: Yahboom_Car The initial password is: 12345678

   2. Remote login to the Raspberry Pi system, the Raspberry Pi is enabled by default to be a Bluetooth control process. You need to close the Bluetooth process, open the TCP_Control process, and then open the host computer to select the 4WD Raspberry Pi.

   3. Raspberry pie address is written: http://192.168.0.1:8080/?action=snapshot

   4.Raspberry Pi Control Service IP: 192.168.0.1 Port: 8888, select [Connect Video] and [Connection Control]

* The official download link can get more information (It's so sorry that only Chinese is available) : Click Here