The product is a green environmental
protection counter, which is designed to counter the low-altitude flying
drone remote control signal in the field, and has no effect on the surrounding signals such as mobile communication, carrier base station, car remote control, police radar and so on.
Counter-production adopts 3~4 signal output (remote control 2.4G/5.8G
positioning GPS) to intercept the unmanned state of the signal, realize
the communication and navigation between the drone and the remote
control flying hand at a long distance, effectively to the drone Drive
away or make a forced landing.
Description:
1. Using imported chip noise to generate ultra-high speed sweeping technology to generate multiple bandwidth signals
2. Ultra-wideband high-gain integrated antenna, battery built-in design, simple and easy to carry and operate
3. It adopts aluminum casing,
intelligent temperature control and heat dissipation, and the surface
adopts international technology for secondary oxidation and wear
resistance.
4. The effective counter distance is 500-1300 meters, depending on the distance between the remote control and the drone more than 20 meters.
5. Counter-method conventional signal,
frequency modulation, spread spectrum control, etc. Full-frequency
coverage, extreme speed risk, second control
6. The visible part of the body has a power switch with a power indicator light, which is directly controlled by one hand.
7. Control switch is designed independently, for drone control, drive-off, forced-off and forced landing
Feature:
| Name | iMars Portable Drone Signal Shield |
| Working frequency | Remote video: 2.4G / 5.8G, Navigation: GPS, GLONASS / Beidou |
| Color | Camouflage |
| Power supply mode | Built in battery DC 24V / 3500mAh |
| Endurance work | Built-in battery work 45 - 70 minutes |
| Operating temperature Temperature | -40°C to +70°C |
| Machine power consumption | 55W |
| Machine weight | 3KG |
| Machine size | 277X80X51mm |
Fitment:
Suitable for all types of drones
Instructions for use:
1. Before opening the box to take out the equipment, check whether the accessories are complete;
2. For the first time, please fully
charge the battery of the device first, with the special charger
charging indicator light red, the full indicator light is green, to
ensure that the battery is fully charged;
3. The equipment is easy to operate, First: use the front of the shield to the direction of the drone, then: press
the switch The 2.4G/5.8G indicator light is on the drone and the
obstruction jurisdiction, at the same time, when the GPS indicator is
pressed, the drone is forced to land.
Pacakge Included:
1 X iMars Handheld Light Portable Signal Drone Counter
1 X DC 24V Charger
1 X Case
1 X Manual
