Introductions:
● The kit is a wireless remote control smart car kit based on the ATmega328P UNO-R3 motherboard.
● The PCB chassis is compatible with the ATmega328P motherboard, making it easy to install UNO-R3 or other compatible motherboards.
● According to the installation video assembly car, each step has a clear explanation, the installation is very simple.
● The geared motor and battery holder are easy to install and plug and play.
● Ultrasonic sensor HC-SR04 can be installed
● Can also be controlled directly using a Bluetooth module, etc.
● Direct control of the car with an infrared remote control
● TT geared motor and welded leads, small size, large torque, long life and easy to use
● This kit helps you learn ATmega328P UNO-R3 programming and learn to make fun projects. Very suitable for the DIY smart car project
About TT motor:
● The kit is a wireless remote control smart car kit based on the ATmega328P UNO-R3 motherboard.
● The PCB chassis is compatible with the ATmega328P motherboard, making it easy to install UNO-R3 or other compatible motherboards.
● According to the installation video assembly car, each step has a clear explanation, the installation is very simple.
● The geared motor and battery holder are easy to install and plug and play.
● Ultrasonic sensor HC-SR04 can be installed
● Can also be controlled directly using a Bluetooth module, etc.
● Direct control of the car with an infrared remote control
● TT geared motor and welded leads, small size, large torque, long life and easy to use
● This kit helps you learn ATmega328P UNO-R3 programming and learn to make fun projects. Very suitable for the DIY smart car project
About TT motor:
- Operating voltage: 3V-6VDC
- No-load speed: 125 rev / min @ 3V, 208 rev / min @ 5V
- No-load current: 150mA@3V, 175mA@5V
- Reduction ratio: 1:48
- Torque: 0.8kg.cm (maximum)
- Line length: 20cm
Pacakge Included:
1 x chassis plate
1 x UNO-R3 motherboard
1 x USB cable (50 cm)
1 x IO expansion board
1 x multi-angle infrared receiver module
1 x active buzzer module
4 x TT motor (welded wire)
4 x motor mounting assembly
4 x tire
1 x 14500 battery case
1 x Phillips screwdriver 3x75mm
1 x 40P female pair busbar
1 x white nylon rivets
12 x black nylon rivets
3 x copper column (M3x6+6mm)
3 x hex nut (M3x2.5)
6 x steel screw (M2x6)
2 x copper column (M2*25)
3 x screws (M3x5)
1 x infrared remote control
