Description:
ADS1013D is a full-featured, highly
practical, cost-effective dual-channel flat-panel oscilloscope launched
by DANIU for the maintenance and R & D industry; this oscilloscope
has a real-time sampling rate of 1GSa / s and an analog bandwidth of
100MHz * 2. With complete trigger function (single / normal /
automatic), it can be used freely for periodic analog signals or
non-periodic digital signals; the built-in high-voltage protection
module can tolerate a continuous voltage of up to 400V . Oscilloscope
burnout accident caused by the probe being turned to the 10X position.
Large time base scroll mode can monitor slow level changes; Equipped
with highly efficient one-key AUTO, which can display the measured
waveform without tedious adjustments; the display is equipped with a
7-inch 800 * 480 resolution high-definition LCD LCD screen, and the
operation method is capacitor Screen touch + gesture operation,
extremely convenient; cursor measurement function, you do not need to
read the backg round scale unit and quantity when manually reading the
amplitude and frequency parameters, and you can directly get the peak,
peak and frequency without conversion; extremely convenient screenshot
And waveform storage function, built-in 1GB storage space, can store up
to 1000 screenshots + 1000 sets of waveform data, the storage process is
simple and fast, save the current waveform anytime, anywhere with a
single touch, no cumbersome prompts and choices, keep calm The current
data is saved in the place, which is very convenient; the powerful
waveform picture manager supports thumbnail browsing, viewing, detailed
viewing, page turning, deletion and waveform zooming in, zooming out,
moving, etc., to facilitate secondary analysis. The fuselage is equipped
with a USB interface, which can be connected to a computer to share its
screenshots with the computer, which is convenient for secondary
analysis; Lissajous figures graphic display function can be used to
determine the amplitude, freque ncy, and phase contrast of two groups of
signals; Analysis of the harmonic components of the signal; built-in
6000mah high-quality lithium battery, which can last for 4 hours on a
full charge, and can be used while charging like a notebook
Features:
1:Intelligent anti-burn,1X Can withstand up to 400V withstand voltage
2:100MHz analog bandwidth @ 100GSa/s sampling rate(1X = 5MHz,10X = 100MHz)
3:Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast
4:Capacitive touch screen, the same as the touch mode of modern mobile smart phone, is not a resistive touch screen with ancient nail operation
5:High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V,100X can measure 0 ~ 4000V
6:Up to 12 parameters measurement:VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Period
7:Cursor measurement function, it is convenient to manually measure the period and frequency and voltage
8:Complete triggering function (single, normal, automatic)
9:At any time, the waveform display (pause function) is frozen
10:Equipped with high efficiency One-button AUTO
11:One-button waveform storage and screenshot
12:Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data
13:Powerful
waveform picture manager supports thumbnail browsing, viewing, detailed
viewing, page turning, deletion and waveform zooming in, zooming out,
moving, etc.
14:Equipped
with a USB interface, which can be connected to a computer to share its
screenshots with the computer, which is convenient for secondary
analysis
15:Lissajous
figures graphic display function can be used to determine the
amplitude, frequency, and phase contrast of two groups of signals
16:FFT display function, can analyze the spectral characteristics of the signal
17:Built in 6000mAh rechargeable lithium battery,Fully charged for 4 hours of continuous use at the highest screen brightness
18:Memory compression technology, waveform refresh screen does not flicker
19:Screen brightness adjustment
20:Background grid brightness adjustment
21:Ultra thin, easy to carry
Specifications:
1:Analog band width: 100MHz * 2
2:Number of channels:2 channels
3:Maximum real time sampling rate: 1GSa/s
4:Vertical sensitivity: 50 mV/div ~ 500 V/div
5:Horizontal time base range: 50S/div ~ 10nS/div
6:Maximum test voltage: 40 V (1X probe), 400 V (10X probe)
7:Storage depth: 240Kbit
8:Input resistance: 1M
9:ADC precision: 8bits
10:Coupling mode: AC/DC
11:Trigger mode: Single, Normal, Auto
12:Trigger edge: Rising edge/Falling edge
13:External trigger voltage 0 – 40 V
14:Display: 7 inch - 800*480
15:Operating: Capacitive touch screen + gesture
16:Extension ports:USB picture export
17:Power supply: 6000 mAh lithium battery
18:Size: 184mm x 124mm x 50mm
19:Total weight:650g
Package includes:
1 x ADS1013D oscilloscope host
2 x Matching 100MHz probe(1X and 10X)
1 x 5V2A Charger(Include USB data line)
1 x User manual (English)
