To Buy It Click Here
Features:
1. Spot Compressed Ultra-thin Focus Laser:
-
The latest 5.5W LD+FAC spot compression laser has an ultra-fine 0.08mm
square laser focus, which is 2 times thinners than ordinary lasers and
has a higher energy density. In the comparison of the cutting effect of
wood/acrylic , the LD+FAC laser engraving traces are thinners, and the
cutting penetration of the laser is stronger.
2. New Eye Protection Design:
-
The laser filter cover filters 98% of the ultraviolet light to eye, You
and the people around you can watch laser engraving without wearing
goggles. The cover also prevents animals grabing the laser spot.
3. Fast Focusing Design:
-
S6 Pro combined fixed focus laser and sliding design . You only need to
slide the laser and tighten the screw to complete the focusing.
4. Solid and Quick Assembly Structure Design:
-
The all-metal structure design makes the machine more solid, and
improve the accuracy of engraving. The whole structure is designed for
quick installation, it usually takes 10-20 minutes to finish
installation.
5. Widely Compatibility:
-
The machine works well with various engraving software, such as
LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM
mode engraving, supports Windows/MAC system, engraving file supports
JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.
6. Square Measuring Ruler Axis:
-
X-Y-axis contain precise scale lines, which is convenient for you to
measure the size of engraving objects . The 410x420mm large engraving
area can meet various engraving needs.
7.Safety Design:
-
There is a power switch on the machine for emergency power off. Fixing
holes are reserved on the four feet and the body to fixi the machine
and the data cable.
Specification:
Product Model
| SCULPFUN S6 Pro
|
Engraving Size
| 410*420mm
|
Engraving Materials
| wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, black-painted metal/ceramic
|
Cutting Material
| cardboard, fabric, wood board, bamboo, acrylic, plastic board;
|
Total Machine Power
| 20-30W
|
Laser Output Optical Power
| 5.5-6W
|
Laser Wave Length
| 455±5nm
|
Engraving Accuracy
| 0.01mm
|
Focusing Method
| fixed focus laser + sliding device
|
Laser Protective Cover
| The light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.
|
Operating Software
| LaserGRBL,
LightBurn, LaserGRBL, LightBurn, Benbox, GrblController, LiteFire,
Support Windows system, Support OSMAC system. Supported file formats NC,
BMP, JPG, PNG, DXF and other image formats.
|
Data Transmission Method
| USB connection
|
Power Supply
| International universal standard. power input: 100-240V AC, 50/60HZ output: 12V 5A
|
Equipment Net Weight
| 3.0kg
|
Package Weight
| 4.4kg
|
Packing Size
| 615*345*130mm
|
Certification
| CE FCC RoHS FDA
|
Note:
●For detailed machine instructions, please refer to the manual for parameter settings.
●When
operating the laser engraving machine, please install the laser
protective cover. If it is not installed, you need to wear goggles.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
●
The light engraving machine can not be directly applied to any mirror
reflecting object, which may cause injury to the operator or burn the
laser.
Package Included:
S6 Pro Engraving Machine Packing List:
1×
| X Axis Assembly
|
2×
| X Shaft
|
2×
| Y Shaft
|
1×
| Control Box Module Set
|
3×
| Support Feet
|
1×
| Laser Module Set
|
1×
| 12V 5A Power Adapter
|
1×
| Power Adapter
|
1×
| USB Cable
|
Step 1~5 Screw Installation Package:
2×
| Belt
|
1×
| T-shaped M5 Screwdriver
|
1×
| L-shaped M4 Screwdriver
|
1×
| L-shaped M3 Screwdriver
|
10×
| Tie
|
1×
| 8-10mm Nut Wrench
|
1×
| Brush
|
1×
| Laser Goggles
|
2×
| 10x10cm Wood Chip 3mm Thickness
|
1×
| A4 Size Steel Desktop Protection Pad |
