yllix

Please Like My Facebook Page

Showing posts with label #Zero+. Show all posts
Showing posts with label #Zero+. Show all posts

Tuesday, April 28, 2020

ANYCUBIC® MEGA ZERO 3D Printer 220x220x250mm Quick Start With Dual Gear Extruder Easy Leveling

ANYCUBIC® MEGA ZERO 3D Printer 220x220x250mm Quick Start With Dual Gear Extruder Easy Leveling




Features:
Technology: FDM (Fused Deposition Modeling)
Build Size:    220X 220X 250 (mm3)
Print accuracy:0.05-0.3 mm
Positioning Accuracy:X/Y 0.0125mm, Z 0.002mm
Extruder Quantity:Single
Nozzle Diameter:    0.4 mm
Print Speed:    20-120mm/s (suggested 60mm/s)
Supported Materials: PLA, TPU, PETG
Ambient Operating Temperature:8°C - 40°C
Operational Extruder Temperature:max 255°C
Slicer Software: Cura
Software Input Formats:.STL, .OBJ, .AMF
Software Output Formats:GCode
Connectivity:Memory card; Data cable(expert users only)

Specifications:

Input rating:11 0V/220V AC, 50/60Hz
Output rating:1 2V6A
Printer Dimensions;504mm*396mm*607mm
Net Weight:7kg

 Package Included:

 1*Mega Zero 3D Printer

Monday, September 3, 2018

MinimumRC A6M2 Zero Backyard Fighter Series 240mm Wingspan Warbird RC Airplane KIT+Motor/PNP

MinimumRC A6M2 Zero Backyard Fighter Series 240mm Wingspan Warbird RC Airplane KIT+Motor/PNP



The Mitsubish.i A6M "Zero" is a long-range fighter aircraft manufactured by Mitsubish.i Aircraft Company, a part of Mitsubish.i Heavy Industries, and operated by the Imperial Japanese Navy from 1940 to 1945. The A6M was designated as the Mitsubish.i Navy Type 0 carrier fighter , or the Mitsubish.i A6M Rei-sen. The A6M was usually referred to by its pilots as the "Reisen" (zero fighter), "0" being the last digit of the imperial year 2600 (1940) when it entered service with the Imperial Navy. The official Allied reporting name was "Zeke", although the use of the name "Zero" was later adopted by the Allies as well.
 
The Zero was considered the most capable carrier-based fighter in the world when it was introduced early in World War II, combining excellent maneuverability and very long range. The Imperial Japanese Navy Air Service (IJNAS) also frequently used it as a land-based fighter.
 
In early combat operations, the Zero gained a legendary reputation as a dogfighter, achieving an outstanding kill ratio of 12 to 1,but by mid-1942 a combination of new tactics and the introduction of better equipment enabled Allied pilots to engage the Zero on generally equal terms.By 1943, the Zero became less effective against newer Allied fighters because of inherent design weaknesses and the failure to develop more powerful aircraft engines. The Allied fighters gained greater firepower, and speed, and approached the Zero's maneuverability, and the Mitsubish.i A6M was outdated by 1944. However, the Zero continued to serve in a front line role until the end of the war because design delays, and production difficulties, hampered the introduction of newer Japanese aircraft. The Zero was also adapted for use in kamikaze operations during the final year of the war.Japan produced more Zeros than any other model of combat aircraft during the course of the war.


Click here to download the manual: MinimumRCA6M2Zero.pdf
Specification:
Brand Name: MinimumRC 
Item Name: A6M2 Zero Fighter
Material: Depron Aero
Wingspan: 240mm
Length: 230mm
Flying Weight: 9-10g
Battery: 1S 3.7V 70mAh (not included)
Radio System: Electromagnetic Rudder 2CH
 
Features:
Depron Aero material,lightweight and strong,not easy to crack.
With 2CH electromagnetic rudder transmitter and 70mAh lipo battery,ready to fly.
Easy to install, enjoy the fun of fly.
With support holder, the airplane can be used as static model when not flying.
 
Package Included:
KIT version:
1 x KIT
1 x Motor

PNP version:
1 x KIT
1 x Motor
2 x Servo
 

Wednesday, August 15, 2018

Duplex MMDVM Hotspot Support P25 DMR YSF + Raspberry Pi Zero + 2pcs Antenna + OLED + Exclouse Case





Features: 
 
- High performance 32-bit ARM processor
- Fully tested
- Supports DMR, P-25,D-Star and System Fusion
- Onboard LEDs to show status (Tx,Rx,PTT,Mode)
- Up to 10mW RF power
- SMA antenna connector,Antenna included
- Mounts cleanly on all current Raspberry Pi's including the Pi Zero
- The firmware is pre-loaded and is easily upgraded via software.
- Open source 3D printable case available
- Uhf 430-450 MHz,433mhz and 900MHz

The upper part is TX,the lower is RX antenna.
UHF+VHF
SMA,antenna
Modem select: STM32_HS_GPIO
Set TX frequency,RX frequency
TX,RX frequency had better 10M or more apart.
SLOT1,SLOT2 support.


Specifications:

Color: Black/Transparent
Material: PCB+Acrylic
Size: 65*75*20mm

Note: 
- The firmware is pre-loaded. Please do not upgrade the firmware by yourself.

Package Included: (Fully assembled and tested Jumbo-Spot-RTQ)

1x OLED display 
1x Raspberry pi zero 
1x MMDVM HotSPOT Module
1x 8G TFT card 
1x Case 
2x 433Mhz antenna

Wednesday, July 18, 2018

AJazz Zero Bluetooth Wired Blue Switch RGB Mechanical Gaming Keyboard for Laptop Tablet Desktop PC

AJazz Zero Bluetooth Wired Blue Switch RGB Mechanical Gaming Keyboard for Laptop Tablet Desktop PC


Specification:
Brand                              Ajazz
Model Zero
Color Black, Gray
Layout 79 Key Compact Layout
Connection Dual Mode(Bluetooth 3.0 & USB Type-C Wired)                    
Switch Blue Switch                    
Backlit 16.8 Million RGB
Anti-ghost Key NKRO
Dimension 310*143*35mm
Multi-Function Key Support
Supported Systems For Mac, Windows, Android, iOS
Battery 4000mA Lithium Battery

Features:

1. 79 key compact layout for easy carry, meanwhile it keeps the common used keys, convenient for your use.
2. Supports bluetooth and wired dual mode connection.

    Compatible with multiple systems(for Mac, Windows, Android, iOS) and devices, such as phones, tablets, laptops. 
    If you want to pair with a desktop PC,  you need to buy a bluetooth dongle separately. 3. Supports 3 bluetooth devices connecting at the same time, long press 3s Fn+ 1/2/3 to pair with different devices, and short press to switch to.
4. 16.8 million brilliant RGB backlit displaying, press FN+Enter to change the backlit modes.
5. Special red thum-stick design, by default it is light control. More function will be updated by Ajazz in the future, such as volume control, gesture control...
6. Driver Link: https://drive.google.com/open?id=12s5K72jKFZiAcihAmcix3StvcAF1cv4n

FN Function:
FN + - = Backlit Brightness Adjustment
FN + Spacebar = Backlit Displaying Speed Adjustment
FN + Right Shift = END
FN + ↑ = PGUP
FN + ↓ = PGDN
FN + ← = Insert
FN + → = Home
FN + Enter = Backlit Modes Adjustment
Long Press 3s FN + ESC = Restore Factory Settings
FN + TAB = Bluetooth/Wired Switch (By default in Bluetooth Mode)

How to Connect Zero in Bluetooth Mode?

1. Turn on the power button on the keyboard side.
2. Long press FN+1/2/3 to enter pair status, indicator light blinks until successfully pairing.
3. Search for "Ajazz Bluetooth Keyboard" on your bluetooth device and choose to connect

Package Included:

1 * AJazz Zero Bluetooth Wired Blue Switch RGB Mechanical Gaming Keyboard for Laptop Tablet Desktop PC