1. Superior flight performance, fast flight speed, simple overall layout and smooth surface.
2. The modular design of the whole machine does not require assembly tools, which is convenient for assembly and carrying.
3. The fixed servo connector is used, no
manual plugging and unplugging is needed, and the whole machine has no
exposed connection lines,
which is simple and beautiful.
4. Focus on aerodynamic performance and fine workmanship
5. Ingenuity, detail design is both professional and caring, to make the details to the extreme
The Dynam Hawk Sky brushless powered glider is great for beginners.
Constructed of durable EPO foam, only a small amount of assembly is
required for this Receiver-Ready (PNP) glider. Powered by a 400
brushless motor which will get you in the air with little effort.
Requires a 4 channel 2.4Ghz radio, a LiPo battery charger and a 3 Cell
11.1 volt 2200mAh LiPo battery to take to the skies.
Description:
Brand: Dynam
Model: Hawksky V2
Wingspan: 1370mm / 53in
Length: 917mm / 36.1in
Flying Weight: 600g / 21.16oz
CG (Center of Gravity)58-62mm from the leading edge of the wing at the root
The Dynam Seawind is a very unique
aircraft as it is a seaplane with its motor mounted off the front of its
very large rudder. It is made from foam and the nose and hull come
covered with plastic which protect the aircraft whilst landing on any
surface. The Dynam Seawind also comes with an optional tricycle
undercarriage system for those who are only flying off land. This
aircraft is ideal not only for those wanting to takeoff and land on
water, but to all intermediate flyers as it is a very stable platform
and its top mounted motor stays well protected. It also has a large wing
area and downturned wingtips which provide excellent low speed handling
capabilities. The Dynam Seawind also makes for an ideal FPV platform as
the canopy has plenty of room to take a camera and provides an
unobstructed view forward of the canopy.
Description:
Brand: Dynam
Model: Seawind
Wingspn: 1220mm
Length: 1045mm
Wing Area: 23sq.dm
Esc: 40A (included)
Motor: BM3715A KV1050 (included)
Servos:9G*5PCS (included)
Weight:1250g
Minimum 4 Channel Radio (not included)
3 Cell 11.1V 2200 mAh LiPo Battery with T connector ( not included)
Features:
* Unique, attractive lines and decal trim sheet
* Two scale pilots for added detail
* Powerful BM3715A-KV1050 Brushless Outrunner motor
* Landing gear set for flying off of land if desired
Using manufacturer's default configuration and the recommended FPV gear, it is 100% under 250 grams.
To the untrained eye, she will look like a harmless toy but, -we and
you know- this is a super capable FPV ship that will even let you do
long range like the bigger sisters. Being so light, it’s a blessing for
beginners since they will find that is really hard to break it. Also,
coupled with NEW Kopilot Lite and the VC400 camera, you will get a ready
to go FPV system, solder and hassle free.
Now you can enjoy more than 30 minutes FPV action (with a 18650 2S1P
3500mAh) or a super thrilling proximity mission (on 3S setup),
everything under 250 grams. Since the wingspan is only 570mm, you don’t
even need to think about the portability, this thing is bicycle-ready!
Forget about those sketchy DIY projects, and spend your time flying a
fantastic wing that will perform like a much bigger plane, without the
worries of being pointed as a criminal.
1. 3-in-1 AIO integrated design, with camera, VTx and antenna, ultra-light weight and small
size, best solution for light-weight airplanes.
2. With OSD to show Power-on time and Input Voltage, so you can know how long you can
keep flying.
3. Default JST plug and up to 25cm power cable, longer enough for most small size airplanes.
4. Up to 2.5km video transmission range on 400mW.
5. Wide voltage input from 7-28V, safe for all kinds of battery or BEC input.
6. With customized strap to hold the camera and EVA foam for anti-vibration.
7. Switchable between 0.1mW / 25mW / 200mW / 400mW.
8. Optional Clover / Dipole antenna for different airframes and flight mode (for straight line
flights or flying around).
9. 5.8Ghz VTx with 40 racing channels.
10. Allows you to display customized Call Signs.
11. Power cable were soldering and fixed by silica glue, solid even in a crash.
Specifications of ZOHD Kopilot
Lite Autopilot System Flight Controller with GPS Module Return Home
Stabilization Gyro for RC Airplanes Fixed Wing FPV Model
Able to interchange from 3 CH/ 4 CH/ 5 CH by locking/unlocking the aileron/flaps control surfaces
Designed for beginners to change or move up their flying skill levels
Nose is made of hard durable plastic nose cone for perfect impact resistance for nose diving
New folding prop design
Bottom fuselage and main wings reinforced with plastic surface covers
to lessen impact to fuselage and servo horns when belly landing
No glue required for assembly makes this easy to assemble, repair, and maintain
Fuselage has plenty of room (excellent for FPV usage or upgrading to larger higher capacity batteries)
Two carbon spars for main wings and one for elevator for extra stiffness and rigidity
Reliable high quality electronics (Hobbywing 30A ESC)
Wings are bolted to fuselage and can be unassembled for easy transportation
Flying Skill Level:
Excellent for beginners and p.ilots of all skill levels. No previous
experience necessary. Flight simulator or experienced p.ilot supervision
recommended for beginner p.ilots.
Build Level:
Minimal airplane assembly required. Less than 1 hour to begin flying
(excluding battery charging time). Please dry fit and test all
electronics before gluing components and assembly.
Maintenance Level:
After every 10 flights and before and after storing airplane, please
check all control surface horns and tighten the screws on surface horns
if needed. Check the control pushrod clevises to insure no cracks are
visible and no clevis is loose. Make sure transmitter batteries are
always fresh and or in new condition.
Specification
Material : EPO
Fuselage : 925MM
Wingspan : 1400MM
Net Weight : 624g
Motor : KV1950 brushless motor(do not included in KIT version)
ESC : Hobbywing 30A esc (do not included in KIT version)
Prop : foldable prop (do not included in KIT version)
Servo : 9G*4 (do not included in KIT version)
PNP Recommanded Part(not included)
Remote control system: 2.4Ghz 6 channel or above Click Here
Battery Charger : 3S Li-Po battery balance charger Click Here
Battery : 11.1V 3S 1300mAh 25C Li-Po battery Click Here
KIT Recommanded Part(not included)
Remote control system: 2.4Ghz 6 channel or above Click Here
Battery Charger : 3S Li-Po battery balance charger Click Here
Battery : 11.1V 3S 1300mAh 25C Li-Po battery Click Here
1 x Airplane (motor,servo,esc are included,most components preinstalled, some assembly required)
1 x p.ilot Figure
1 x User manual
KIT Package Included
1 x Airplane Kit
ARF: Almost Ready to Fly
This packaging option indicates what comes included and does not mean a
completely assembled item. Most onboard electronic components are
pre-assembled out of the box though some assembly is still required.
This packaging option does not include the radio system, battery or
charger, unless noted otherwise.
The QT-MODEL T45 aircraft is a the zoom plane for T-45 Goshawk carrier. It is upgraded by adding the carbon tube to the horizontal tail to increase its strength. In addition, it uses the CNC machining anti-vibration landing gear and tail movable brake hook to make the landing gear more solid and realistic.
The T45 is designed with a convenient spiral assembly structure, integrated wings and newly designed plugs to enhance the strength of the aircraft and simple assembly steps, allowing the entire aircraft assembly to be completed in a short time.
Features: - EPO material,lightweight and durable. - Large cabin space for easy wiring and can be used with a 4S 10000mAh battery. - Stable non-powered gliding performance, superior handling quality, easy to fly, suitable for beginners. - Powerful brushless power system, can easily perform stunt performances such as reverse flight, roll, somersault, and ultra low altitude flight. - Easy to install, the wing and the tail parts adopt split-insert design. - Two wing supports are connected with the fuselage to ensure the strength of the wing after full load.
- Suitable for long range voyage, but also suitable to be used as FPV aircraft.
- Can be upgraded to a Seaplane by adding floats,and can take off on grass and snow.
Recommended Parts (Not Included): Battery: 3S 11.1V 2200mAh 20C LiPo, Click Here Charger: Balance Charger, Click Here Radio System: 2.4G 6CH, Click Here
Note: PNP version, battery, charger, transmitter, receiver and glue are not included.
Package Included: 1x E-DO Model 1500mm Wingspan Cessna EPO Twin Motor FPV RC Airplane PNP
Description:
Brand Name: Skywalker
Item Name: Mini Plus
Color: Red, Blue (optional)
Material: EPP
Wingspan: 1100mm
Length: 790mm
Wing Area: 15.2dm² Motor: 2205 KV1850 ESC: 40A (only supports 2-3S Lipo) Servo: 12g *4pcs Propeller: 6 inch 2-blade PNP Weight: 480g
Flying Weight: 650g - 850g
CG: 42mm behind the leading edge of the wing
Features:
- New high multiple EPP material, lightweight and durable.
- Uniquely polished "stone" design for better flight performance and texture.
- Long-lift airfoil with high lift.
- Stable flight at low altitude, superior gliding performance, high efficiency.
- Use square carbon fiber tube as the backbone of the fuselage wing,more torsion-resistant.
- L-type Aluminum Alloy design, motor and ESC easily assembly, better for maintenance
- Drawer design flight control cabin, more convenient to replace equipment.
- The gimbal layer is placed on the top of the nose to effectively avoid the damage to the camera.
- Two Take-off and landing modes: Sliding and landing, hand throwing and landing.
Recommended Parts For Skywalker Mini Plus (not included):
Battery: 3S 11.1V 2200mAh - 3300mAh, Click Here
Charger: Balance Charger, Click Here
Radio System: 2.4G 4CH, Click Here
Note:
PNP version, transmitter,receiver,battery,charger and glue are not included.
Recommended Parts for this item(not included):
Propeller: 8060 2-blade, Click Here
Battery: 3S 11.1V 1500mAh - 2200mAh 25C LiPo, Click Here
Charger: Balance charger, Click Here
Radio System: 2.4G 4CH, Click Here
Features:
- EPO material, high strength, strong toughness and low resistance.
- Double control of double aileron servo design, high precision, large rudder surface, suitable for 3D flight.
- Rear three-point landing gear design, easy to take off and land.
- Rear landing gear can be turned, more convenient.
- Large battery compartment design, meeting long-term flight requirements.
- New motor mount for improved anti-collision performance and stability.
Note:
PNP version,the propeller,spinner,battery,charger,remote control and receiver are not included.
Glue is not included.
