BlitzRC Sky Surfer V5 1400mm EPO RC Airplane KIT/ARF PNP Aircraft FPV Drone Sailplane g.lider Fixed Wing
Features
5 operable channels (aileron, elevator, rudder, throttle, flaps)
Able to interchange from 3 CH/ 4 CH/ 5 CH by locking/unlocking the aileron/flaps control surfaces
Designed for beginners to change or move up their flying skill levels
Nose is made of hard durable plastic nose cone for perfect impact resistance for nose diving
New folding prop design
Bottom fuselage and main wings reinforced with plastic surface covers
to lessen impact to fuselage and servo horns when belly landing
No glue required for assembly makes this easy to assemble, repair, and maintain
Fuselage has plenty of room (excellent for FPV usage or upgrading to larger higher capacity batteries)
Two carbon spars for main wings and one for elevator for extra stiffness and rigidity
Reliable high quality electronics (Hobbywing 30A ESC)
Wings are bolted to fuselage and can be unassembled for easy transportation
Flying Skill Level:
Excellent for beginners and p.ilots of all skill levels. No previous
experience necessary. Flight simulator or experienced p.ilot supervision
recommended for beginner p.ilots.
Build Level:
Minimal airplane assembly required. Less than 1 hour to begin flying
(excluding battery charging time). Please dry fit and test all
electronics before gluing components and assembly.
Maintenance Level:
After every 10 flights and before and after storing airplane, please
check all control surface horns and tighten the screws on surface horns
if needed. Check the control pushrod clevises to insure no cracks are
visible and no clevis is loose. Make sure transmitter batteries are
always fresh and or in new condition.
Specification
Material : EPO
Fuselage : 925MM
Wingspan : 1400MM
Net Weight : 624g
Motor : KV1950 brushless motor(do not included in KIT version)
ESC : Hobbywing 30A esc (do not included in KIT version)
Prop : foldable prop (do not included in KIT version)
Servo : 9G*4 (do not included in KIT version)
PNP Recommanded Part(not included)
Remote control system: 2.4Ghz 6 channel or above Click Here
Battery Charger : 3S Li-Po battery balance charger Click Here
Battery : 11.1V 3S 1300mAh 25C Li-Po battery Click Here
KIT Recommanded Part(not included)
Remote control system: 2.4Ghz 6 channel or above Click Here
Battery Charger : 3S Li-Po battery balance charger Click Here
Battery : 11.1V 3S 1300mAh 25C Li-Po battery Click Here
Motor : 2212-2216 brushless motor Click Here
ESC : 30A esc Click Here
Prop : Click Here
Servo : 9G*4 Click Here
PNP Package Included
1 x Airplane (motor,servo,esc are included,most components preinstalled, some assembly required)
1 x p.ilot Figure
1 x User manual
KIT Package Included
1 x Airplane Kit
ARF: Almost Ready to Fly
This packaging option indicates what comes included and does not mean a
completely assembled item. Most onboard electronic components are
pre-assembled out of the box though some assembly is still required.
This packaging option does not include the radio system, battery or
charger, unless noted otherwise.
