

Smartphone, Notebook, Tablets, Smart Watches, Earphones, Wireles charger, Wireless headphones, Keyboards, Mouse, Android Tv Box, Security Devices, Cameras, Projectors, Rc Planes, Rc Cars, Rc Boats, Laser Rangefinders, Mini Pc, Charging Data Cables, Protective Cases For iPhone,Memory Cards, Binoculars, And Many Kind Of Products
| SE0802 KV19000 Motor | Mode | SE0802 KV19000 |
| Configuration | 9N12P | |
| Stator Diamter | 8.4mm | |
| Stator Length | 2mm | |
| Shaft Diameter | Φ1.0mm | |
| Motor Dimension(Dia.*Len) | Φ10.5mm*14.9mm | |
| Weight(g) | 1.7g(without connector and cable) | |
| No.of Cells(Lipo) | 1S | |
| Servo | Weight | 3.7g (Without connector and cable) |
| Dimension | 20.0x17.6x8.0mm | |
| Supply Voltage | 4.8~6.0V | |
| Stall Torque | 0.4kg.cm | |
| Operating Speed | 0.12sec/60° (NO Load Running) | |
| Flight Controller | Firmware | Betaflight_3.3.0_Crazybee |
| Betaflight Target | CRAZYBEEF3FR (Frsky version) CRAZYBEEF3FS (Flysky version) |
|
| MCU | STM32F303CCT6 (72MHZ, 256K FLASH) | |
| Sensor | MPU-6000 (SPI Connection) | |
| Board Size | 28.5 * 28.5MM | |
| Board Weight | 3.5g | |
| Power Supply | 1S Battery Input (DC 3.5-4.35V) | |
| - Built-in 5A (each) Blheli_S 4in1 ESC Dshot600 ready - Built-in Frsky receiver with telemetry (D8/D16 switchable) - Built-in Betaflight OSD (SPI Control) - Built-in Current meter Max 14A - Built-in 5V 0.8A BEC with LC filter - Built-in voltage detection - BLHELI_S pass-through Ready - Heading LED Ready |
||
| Onboard 4-in-1 5A ESC | Power Supply | 1S LiPo/LiPo HV (4.2v/4.35v) |
| Current | 5A continuous peak 6A (3 seconds) | |
| Factory Firmware | O_L_5_REV16_6.HEX | |
| Default Protocol | DSHOT600 | |
| Support BLHeliSuite programmable | ||
| Frsky Receiver Version | Channels | 8ch or 16ch |
| No ground interference ( Transmitter and receiver 1m from the ground) | 300m | |
| - SPI BUS receiver - Frsky D8/D16 switchable - Compatible both D8 and D16 transmitter - Failsafe support |
||
| Flysky Receiver Version | Protocol | AFHDS and AFHDS-2A Switchable |
| Channels | 8ch(AFHDS) or 14ch(AFHDS-2A) | |
| No ground interference ( Transmitter and receiver 1 m from the ground) | 300m | |
| - SPI BUS receiver - Failsafe support |
||
| AIO Camera & VTX | Output Power | 25mw |
| Frequency | 48CH | |
| Input Voltage | 3.3V 5.5V | |
| Current Consumption | 300mA (type) | |
| Camera Resolution | 700TVL | |
| Field of View | 120° | |
| Video Format | NTSC | |
| Antenna | RG178 Antenna | |
| Frequency | 5.8GHz 6 bands 48 channels | |
| With Race Band | 5474 5945 MHZ | |
| Size | 13.9"12.0mm ( L*W ) | |
| Weight | 3g | |
| Lipo Battery | Capacity | 250mAh |
| Voltage | 3.8V | |
| Continuous Discharge Rate | 30C | |
| Instantaneous Discharge Rate | 60C | |
| Size | 60mmx18mmx7mm | |
| Weight | 6.5g | |
| Connector | PH2.0 | |
| Product name: | NITECORE TM10K Tiny Monster 10000 Lumen LCD Display Burst Rechargeable Flashlight |
| Brand: | NITECORE |
| Model: | TM10K |
| Emitter Type: | 6x XHP35 HD |
| Max Output: | 10000 lumens |
| Range: | 315 yards |
| Mode: | Turbo, High, Mid, Low, Ultralow |
| Lumens: | Turbo: 10,000 lumens High: 400-2000 lumens Mid: 300 lumens Low: 100 lumens Ultralow: 3 lumens |
| Runtime: | High: 2 hr Mid: 7 hr Low: 14 hr Ultralow: 200 hr |
| Battery Configurations: | 4800mAh li-ion battery (Built-in) |
| Switch Type: | Clicky |
| Switch Location: | Body side of the flashlight |
| Impact Resistant | 1 meters |
| Waterproof: | IP68 - 2m submersible |
| Color: | Black |
| Weight: | 8.7oz |
| Size: | 4.33" x 1.61" x 1.22" (L x W x H) |