Basen BA-4 Battery Charger LCD Screen US Plug LCD Display Charger For 26650 21700 20700 18650 18490 18350 17670 17500 16340(RCR123) 14500 10440 Battery

To Buy It Click Here

Specification:

Brand	Basen
Input	AC cable 110V-240V 5060Hz/ DC 12V 1A (Selective)
Output currnt (Li-ion)	500mA x 4 / 1000mA x 2 / 2000mA x 1
Output currnt (Ni-MH)	500mA x 4/ 1000mA x 2
Output voltage	1.48V / 4.2V / 3.6V / 4.35V
Standby current	≤15mA
Constant voltage cut-off current	≤100mA
Size	147 x 100 x 37mm
For battery	1.2V Ni-MH / Ni-CD to 3.7V Li-ion / 3.2V Li-Fe / 3.8V Li-ion battery. For AA AAA SC 18650 / 26650 / 21700 / 18490 / 17670 / 14500 / IMR 10440

Features:
1. Smart LCD screen, show all the charging status, like Charging Volume, charging time, Current, Volt, Battery type, etc.
2. Press the button to change the battery type,it will start to charge 5 seconds after setting the battery type (3.2V or 3.8V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it need set for only 3.2V and 3.8V batteries.
3. Charging current automactically Control 500mA,1000mA,2000mA(only no.4 slot support 2A out put,Ni-Mh/Ni-Cd max support 1A).
4. Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.
5. Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA), 2000mA is fixed only for slot#4.
6. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
7 Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)
8. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
 
How to Use:
Put the battery into the charger and press the button within8 seconds to select the battery type (automatically recognized as 3.7V Li-ion or 1.2V Ni-Mh. Charging starts after 8 seconds.
 
LCD Display: 
1. If no battery is put in, LCD keeps on Show Null, then into sleep mode.
2. When battery is detected in, LCD lights on AND 3.7V LCD keep flicker to indicate to set the battery type, if no operation, it begin to charge 5 seconds later automatically under detection, LCD will display the charging status, Like BATTERY TYPE, TIME, VOLUME, VOLT, CURRENT, CHARGED VOLUME.
3. Charger screen will automatically into sleep mode, tap the button can show the battery type for 5 seconds.
4. LCD screen will light on when charging finished, and you could disconnect them.
5. You do not need adjust charging current, charger will control it smartly, li-ion max support 2A, Ni-Mh/Ni-Cd max support 1A.
 
Warning:
1. This charger can only charge a cylindrical lithium-ion batteries and nickel-metal hydride batteries, non-rechargeable lithium iron phosphate battery;
2. Before use, please carefully refer to the instructions, pay attention to the recommendation of the rechargeable battery charging current, do not exceed the recommended charging current;
3. Do not use other power adapter;
4. Chargers discharge may be hot, be careful not to burn;
5. Stop use, unplug the power, removing the battery;
6. it can only be used in normal room.
7. This product test data for reference only, please refer professional equipment.
 
Package inlcuded:
1 x Basen BA-4 battery charger
1 x Charging cable

LiitoKala LII-S4 LCD Battery Charger 3.7V 18650 18350 18500 16340 21700 20700B 20700 14500 26650 1.2V AA AAA Smart Charger

To Buy It Click Here

Specifications:

Brand	LiitoKala
Model	LII-S4
Input	DC5.0V 2A
Output Voltage	DC 4.20V for Li-Ion DC 4.35V for IMR DC 3.65V for LiFePO4 DC 1.50V for NiMH/NI-Cd
Output Current (selectable)	Li-ion /IMR/LiFePO4: 2000mA*1(only one) / 1000mA* 2 / 500mA *4 The NiMH/NiCd: 500mA
Compatible Battery Types	Li-ion / IMR / LiFePO4: 26650, 21700, 20700,18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440 NiMH / Cd: AA, AAA, SC, C
Dimensions	118mm x 100.0mm x 30.0mm (Length x Width x Thickness) / 4.64" x 3.94" x 1.18"
Weight	136.4g

Features:

1. 4-slots independent charging and MCU management system, Micro USB DC 5V input min.2A.

2. With battery polarity auto-detection function(any polarity)

3. Selective 0.5A/1A/2A charging currents for Lithium batteries by long press the current button. The defaulted current is 0.5A.

4. Built-in digital tube indicator shows the real-time charging status of channel no. (CH), voltage, current, time  capacity and battery type Li-Fe 3.20V / Li-ion 3.70V /Li-ion 3.85V (IMR); When two channels charging, total current will be no more than 2A( when only 1pcs battery inserted, the charging current will be 2A, after the second battery inserted, the current will be automatically lowered to 1A; when charging finish, it shows "FULL".

5. Identify Li-Ion and Ni-MH battery automatically; Select manually by short-press the mode button for IMR battery(3.85V Li-ion )and LiFePO4 battery(3.2V).

6. Activation function for 0V battery of PCM protection.

7. Will not charge batteries with 0.0≤U<0.2V  for NiMH/Cd and 1.65≤U<2.2V for Li-Ion.

8. Multi-safety protection functions of over-charging, over-discharge, short-circuited and can automatically Identify broken/defective battery(will not charge bad batteries).

9. Charging under constant voltage and current.

Operation Instruction:

1. Buttons: There's a 'MODE' button separately for each channel choosing the battery types, charging current and charging status tracking. Long press the 'MODE' button for 3 seconds to change the charging current for lithium batteries, you can change the charging current at any time. Short press the 'MODE' button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery. It begins to charge the battery 5 seconds after your settings.

2. Charging display: Connect the 5V input port with USB cable, the digital indicator showing the whole information for 2S and "null" if no battery inserted;  after it detects with battery inserted showing channel no, battery voltage and current while the battery type symbol is flashing( there will be no battery type symbol flashing function for NiMH/NiCd batteries); then in 5S, it will start to charge with "V" flashing(charge starts). When the battery is fully charged, it shows "Full".

Cautions:

1. This charger can only charge cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4.

2. Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit.

3. Use only DC adapter with output 5V min.2A .

4. Mind heating while charging; keep far away from Children.

5. Remove the charger from power source after charging complete, and remove the battery from the charger at the same time.

6. For indoor use only.

7. The displaying data only for reference, please refer to professional instrument for more accurate data.

Package Includes:

1 x LiitoKala LII-S4 battery charger

Liitokala Lii-PD4 LCD 3.7V 26650/21700/20700/18650/18490/18350/17670/17500/16340(RCR123)/14500/10440 1.2V AA AAA SC C NiMH Lithium Battery Charger

To Buy It Click Here

Specification:

Product name:	Liitokala Lii-PD4 LCD 3.7V NiMH Lithium Battery Charger US/EU Plug
Brand:	LiitoKala
Model:	Lii-PD4
Input:	AC cable 110V-240V 5060Hz/ DC 12V 1A (Selective)
Output Currnt (Li-ion):	500mA x4/ 1000mA x2/ 2000mA x1
Output Currnt (Ni-MH):	500mA x4/ 1000mA x2
Output Voltage:	1.48V/ 4.2V/ 3.6V/ 4.35V
Standby Current:	≤15mA
Constant Voltage Cut-off Current:	≤100mA
Size:	147mm(L) x 100mm(W) x 37mm(H)
For Battery:	1.2V Ni-MH/ Ni-CD to 3.7V Li-ion/ 3.2V Li-Fe/ 3.8V Li-ion battery. For AA AAA SC 18650/ 26650/ 21700/ 18490/ 17670/ 14500/ IMR 10440

Features:
1. Smart LCD screen, show all the charging status, like Charging Volume, charging time, Current, Volt, Battery type, etc.
2. Press the button to change the battery type,it will start to charge 5 seconds after setting the battery type (3.2V or 3.8V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it need set for only 3.2V and 3.8V batteries.
3. Charging current automactically Control 500mA,1000mA,2000mA(only no.4 slot support 2A out put,Ni-Mh/Ni-Cd max support 1A).
4. Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.
5. Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA), 2000mA is fixed only for slot#4.
6. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
7 Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)
8. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

How to Use:
Put the battery into the charger and press the button within8 seconds to select the battery type (automatically recognized as 3.7V Li-ion or 1.2V Ni-Mh. Charging starts after 8 seconds.

LCD Display: 
1. If no battery is put in, LCD keeps on Show Null, then into sleep mode.
2. When battery is detected in, LCD lights on AND 3.7V LCD keep flicker to indicate to set the battery type, if no operation, it begin to charge 5 seconds later automatically under detection, LCD will display the charging status, Like BATTERY TYPE, TIME, VOLUME, VOLT, CURRENT, CHARGED VOLUME.
3. Charger screen will automatically into sleep mode, tap the button can show the battery type for 5 seconds.
4. LCD screen will light on when charging finished, and you could disconnect them.
5. You do not need adjust charging current, charger will control it smartly, li-ion max support 2A, Ni-Mh/Ni-Cd max support 1A.

Warning:
1. This charger can only charge a cylindrical lithium-ion batteries and nickel-metal hydride batteries, non-rechargeable lithium iron phosphate battery;
2. Before use, please carefully refer to the instructions, pay attention to the recommendation of the rechargeable battery charging current, do not exceed the recommended charging current;
3. Do not use other power adapter;
4. Chargers discharge may be hot, be careful not to burn;
5. Stop use, unplug the power, removing the battery;
6. it can only be used in normal room.
7. This product test data for reference only, please refer professional equipment.

Package inlcuded:
1 x Liitokala Lii-PD4 Battery Charger
1 x Charging Cable