Specifications:
| Brand | LiitoKala |
| Model | LII-S4 |
| Input | DC5.0V 2A |
| Output Voltage |
DC 4.20V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.50V for NiMH/NI-Cd
|
| Output Current (selectable) |
Li-ion /IMR/LiFePO4: 2000mA*1(only one) / 1000mA* 2 / 500mA *4
The NiMH/NiCd: 500mA
|
| Compatible Battery Types |
Li-ion / IMR / LiFePO4: 26650, 21700, 20700,18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
NiMH / Cd: AA, AAA, SC, C
|
| Dimensions | 118mm x 100.0mm x 30.0mm (Length x Width x Thickness) / 4.64" x 3.94" x 1.18" |
| Weight | 136.4g |
Features:
1. 4-slots independent charging and MCU management system, Micro USB DC 5V input min.2A.
2. With battery polarity auto-detection function(any polarity)
3. Selective 0.5A/1A/2A charging currents for Lithium batteries by long press the current button. The defaulted current is 0.5A.
4.
Built-in digital tube indicator shows the real-time charging status of
channel no. (CH), voltage, current, time capacity and battery type
Li-Fe 3.20V / Li-ion 3.70V /Li-ion 3.85V (IMR); When two channels
charging, total current will be no more than 2A( when only 1pcs battery
inserted, the charging current will be 2A, after the second battery
inserted, the current will be automatically lowered to 1A; when charging
finish, it shows "FULL".
5.
Identify Li-Ion and Ni-MH battery automatically; Select manually by
short-press the mode button for IMR battery(3.85V Li-ion )and LiFePO4
battery(3.2V).
6. Activation function for 0V battery of PCM protection.
7. Will not charge batteries with 0.0≤U<0.2V for NiMH/Cd and 1.65≤U<2.2V for Li-Ion.
8.
Multi-safety protection functions of over-charging, over-discharge,
short-circuited and can automatically Identify broken/defective
battery(will not charge bad batteries).
9. Charging under constant voltage and current.
Operation Instruction:
Cautions:
Operation Instruction:
1.
Buttons: There's a 'MODE' button separately for each channel choosing
the battery types, charging current and charging status tracking. Long
press the 'MODE' button for 3 seconds to change the charging current for
lithium batteries, you can change the charging current at any time.
Short press the 'MODE' button to change the charging types of lithium
batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion
battery automatically. You need to change the mode for 3.85V li-ion and
3.2V LiFePO4 battery. It begins to charge the battery 5 seconds after
your settings.
2.
Charging display: Connect the 5V input port with USB cable, the digital
indicator showing the whole information for 2S and "null" if no battery
inserted; after it detects with battery inserted showing channel no,
battery voltage and current while the battery type symbol is flashing(
there will be no battery type symbol flashing function for NiMH/NiCd
batteries); then in 5S, it will start to charge with "V" flashing(charge
starts). When the battery is fully charged, it shows "Full".
Cautions:
1. This charger can only charge cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4.
2.
Read this manual before use and pay special attention to the
recommended charge current, must avoid to charge battery beyond the
recommended current limit.
3. Use only DC adapter with output 5V min.2A .
4. Mind heating while charging; keep far away from Children.
5. Remove the charger from power source after charging complete, and remove the battery from the charger at the same time.
6. For indoor use only.
7. The displaying data only for reference, please refer to professional instrument for more accurate data.
Package Includes:
1 x LiitoKala LII-S4 battery charger
