Main Features:
● Fast response, 3ms only, which is much less than the average 20ms even 9 channels act synchronously.
● English, Chinese, Espanol, Deutsch, French, Italiano, Turkish,
Russian & Korean menu can be switched, full types specialize helicopter 8 swash plate modes, f
ixed wing 2 airfoils 3 rears, gliders 4 airfoils and 2 rears, multi-copter menu.
● DSSS and FHSS spread-spectrum technology working synchronously, QPSK modulation
support excellent anti-interference performance.
● Programmable mix control. Basic menu, advanced menu, graphic view for verities of throttle and servo curve.
● Support S - BUS, PPM and PWM signal.
● Unique telemetry Receiver integrates signal strength and voltage telemetry sensor.
Both R10DS and R9DS support extended engine voltage telemetry module
PRM - 01 and OSD info telemetry module PRM - 0. PRM - 02 can feedback GPS, SPEED,
voltage, etc. on AT9S / AT10 display when working with flight controller APM or PIX.
● 4096 section precision, 0.25us per section, servo anti-shake rudder.
● Vibration alarm.
● Support USB online upgrade, the upgrade firmware V1.3.2 add CAR and BOAT model type.
● Four VR switches, three three-gear switches, four two-gear switches, a reset trainer switch.
Support multiple aerial control mode and PTZ control.
Specifications:
Size: AT9S: 183 x 100 x 193mm, R9DS: 41 x 23 x 14mm
Frequency: 2.4GHz ISM band ( 2400MHz to 2483.5MHz )
Modulation mode: QPSK
Channel bandwidth: 5.0MHz
Spread spectrum: DSSS and FHSS
Adjacent channel rejection: >38dbm
Transmitter power: <100mW ( 20dbm )
Operating current: <90mA
Operating voltage: 7.4 - 18.0V
Control distance: more than 900 meters ground, 1500 meters air,
the actual control distance depends on the flying environment
Compatible model: include all 120 degree and 90 degree swash-plate helicopter,
all fix wings, glider and multi-rotor
Simulator model: under the simulator model the transmitter action turn off,
change to power saving model
Screen: 2.8 inch 16 colorful screen, 240 x 320 pixels
Support receivers: R9DS ( S - BUS & PWM ), R10DS and R6DS
Battery: 4 x AAA( not included )
● Fast response, 3ms only, which is much less than the average 20ms even 9 channels act synchronously.
● English, Chinese, Espanol, Deutsch, French, Italiano, Turkish,
Russian & Korean menu can be switched, full types specialize helicopter 8 swash plate modes, f
ixed wing 2 airfoils 3 rears, gliders 4 airfoils and 2 rears, multi-copter menu.
● DSSS and FHSS spread-spectrum technology working synchronously, QPSK modulation
support excellent anti-interference performance.
● Programmable mix control. Basic menu, advanced menu, graphic view for verities of throttle and servo curve.
● Support S - BUS, PPM and PWM signal.
● Unique telemetry Receiver integrates signal strength and voltage telemetry sensor.
Both R10DS and R9DS support extended engine voltage telemetry module
PRM - 01 and OSD info telemetry module PRM - 0. PRM - 02 can feedback GPS, SPEED,
voltage, etc. on AT9S / AT10 display when working with flight controller APM or PIX.
● 4096 section precision, 0.25us per section, servo anti-shake rudder.
● Vibration alarm.
● Support USB online upgrade, the upgrade firmware V1.3.2 add CAR and BOAT model type.
● Four VR switches, three three-gear switches, four two-gear switches, a reset trainer switch.
Support multiple aerial control mode and PTZ control.
Specifications:
Size: AT9S: 183 x 100 x 193mm, R9DS: 41 x 23 x 14mm
Frequency: 2.4GHz ISM band ( 2400MHz to 2483.5MHz )
Modulation mode: QPSK
Channel bandwidth: 5.0MHz
Spread spectrum: DSSS and FHSS
Adjacent channel rejection: >38dbm
Transmitter power: <100mW ( 20dbm )
Operating current: <90mA
Operating voltage: 7.4 - 18.0V
Control distance: more than 900 meters ground, 1500 meters air,
the actual control distance depends on the flying environment
Compatible model: include all 120 degree and 90 degree swash-plate helicopter,
all fix wings, glider and multi-rotor
Simulator model: under the simulator model the transmitter action turn off,
change to power saving model
Screen: 2.8 inch 16 colorful screen, 240 x 320 pixels
Support receivers: R9DS ( S - BUS & PWM ), R10DS and R6DS
Battery: 4 x AAA( not included )
Specification
General
| Brand: RadioLink Type: Transmitter |
|---|---|
Remote Controller Specifications
| Remote Control: 2.4GHz Wireless Radio Control |
Dimensions and Weight
| Product weight: 0.8800 kg Package weight: 0.9500 kg Product size (L x W x H): 18.30 x 10.00 x 19.30 cm / 7.2 x 3.94 x 7.6 inches Package size (L x W x H): 20.00 x 12.00 x 25.00 cm / 7.87 x 4.72 x 9.84 inches |
Package Contents
| Package Contents: 1 x RadioLink AT9S Upgrade Transmitter, 1 x Mini R9DS Receiver, 1 x CD |
