Holybro Kopis 2 FPV Racing RC Drone PNP BNF w/ Kakute F7 OSD Atlatl HV V2 800MW 35A Dshot1200 Runcam Micro Swift Cam
 Description:
 Brand name: Holybro 
 Item name: Kopis 2 FPV Racing Drone
 Flight controller: Kakute F7 
 VTX: Atlatl HV V2
 ESC: Tekko32 4 IN 1 35A (Dshot1200 compatible)
 Brushless motor: T-motor F40 PRO2 2400KV
 Propeller: DALPROP Cyclone T5046C (4 pairs)
 Camera: Runcam Micro Swift
 Antenna: Foxeer Lollipop 5.8G RHCP
Receiver: Frsky XSR (BNF version only)
Receiver: Frsky XSR (BNF version only)
 MCU: STM32F745VGT6 32-bit processor
 IMU: ICM20689 (SPI) 32 kHz capable
 Barometer: BMP280
 TF card for Blackbox logging
 Supports 4S-6S battery (motors are optimized for 4S)
 Weight 299 grams without battery or props
 Features:
 -5mm full 3k carbon fiber twill.
 -Counter-sunk screws on base for great appearance and protection of battery against damage.
 -KakuteF7 flight controller with soft-mounted gyro for mechanical 
filtering of vibration. Means you can disable more software filters for 
best flight handling.
 -Improved soft-mounting foam for KakuteF7 gives optimal balance of 
stiffness and damping for even better gyro performance than before!
 -Betaflight OSD included. Monitor voltage and battery capacity in your 
FPV goggles. Change PIDs and Rates using your transmitter sticks.
 -Atlatl HV V2 video transmitter:
 5.8 GHz
 Standard 40-channel set. However 5645 MHz and 5925 MHz 5945 MHz are 
illegal in many areas, so they are not supported. If you select one of 
these channels, it will simply fail to work.
 Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
 MMCX antenna connector for easy, secure connection. Won’t break or come loose like the IPEX connector used on other vTX.
 Control the vTX channel and transmit power from the OSD using your 
transmitter sticks or from your Transmitter. No more picking up the quad
 to change vTX settings!
 -Buzzer included.
 -RunCam Swift Micro FPV camera
 -Adjustable camera uptilt from 0 degrees to 90 degrees.
 -Serial receiver supported (SBUS, iBUS, Spektrum). Legacy PPM and PWM receivers not supported.
 Package included:
 1 x Kopis 2 FPV Racing Drone
 1 x 5.8 GHz FPV antenna
 8 x 5046 3-blade propeller
 1 x Battery strap (installed)

