DANIU ADS1013D 2 Channels 100MHz Band Width 1GSa/s Sampling Rate Oscilloscope with 7 Inch Color TFT LCD Touch Screen

To Buy It Click Here

Description:
 

ADS1013D is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope launched by DANIU for the maintenance and R & D industry; this oscilloscope has a real-time sampling rate of 1GSa / s and an analog bandwidth of 100MHz * 2. With complete trigger function (single / normal / automatic), it can be used freely for periodic analog signals or non-periodic digital signals; the built-in high-voltage protection module can tolerate a continuous voltage of up to 400V . Oscilloscope burnout accident caused by the probe being turned to the 10X position. Large time base scroll mode can monitor slow level changes; Equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments; the display is equipped with a 7-inch 800 * 480 resolution high-definition LCD LCD screen, and the operation method is capacitor Screen touch + gesture operation, extremely convenient; cursor measurement function, you do not need to read the backg round scale unit and quantity when manually reading the amplitude and frequency parameters, and you can directly get the peak, peak and frequency without conversion; extremely convenient screenshot And waveform storage function, built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform anytime, anywhere with a single touch, no cumbersome prompts and choices, keep calm The current data is saved in the place, which is very convenient; the powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc., to facilitate secondary analysis. The fuselage is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis; Lissajous figures graphic display function can be used to determine the amplitude, freque ncy, and phase contrast of two groups of signals; Analysis of the harmonic components of the signal; built-in 6000mah high-quality lithium battery, which can last for 4 hours on a full charge, and can be used while charging like a notebook

Features:

 

1:Intelligent anti-burn,1X Can withstand up to 400V withstand voltage

2:100MHz analog bandwidth @ 100GSa/s sampling rate(1X = 5MHz,10X = 100MHz)

3:Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast

4:Capacitive touch screen, the same as the touch mode of modern mobile smart phone, is not a resistive touch screen with ancient nail operation

5:High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V,100X can measure 0 ~ 4000V

6:Up to 12 parameters measurement:VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Period

7:Cursor measurement function, it is convenient to manually measure the period and frequency and voltage

8:Complete triggering function (single, normal, automatic)

9:At any time, the waveform display (pause function) is frozen

10:Equipped with high efficiency One-button AUTO

11:One-button waveform storage and screenshot

12:Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data

13:Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.

14:Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis

15:Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals

16:FFT display function, can analyze the spectral characteristics of the signal

17:Built in 6000mAh rechargeable lithium battery,Fully charged for 4 hours of continuous use at the highest screen brightness 

18:Memory compression technology, waveform refresh screen does not flicker

19:Screen brightness adjustment

20:Background grid brightness adjustment

21:Ultra thin, easy to carry

 

Specifications:

 

1:Analog band width: 100MHz * 2

2:Number of channels:2 channels

3:Maximum real time sampling rate: 1GSa/s

4:Vertical sensitivity: 50 mV/div ~ 500 V/div

5:Horizontal time base range: 50S/div ~ 10nS/div

6:Maximum test voltage: 40 V (1X probe), 400 V (10X probe)

7:Storage depth: 240Kbit

8:Input resistance: 1M

9:ADC precision: 8bits

10:Coupling mode: AC/DC

11:Trigger mode: Single, Normal, Auto

12:Trigger edge: Rising edge/Falling edge

13:External trigger voltage 0 – 40 V

14:Display: 7 inch - 800*480

15:Operating: Capacitive touch screen + gesture

16:Extension ports:USB picture export

17:Power supply: 6000 mAh lithium battery

18:Size: 184mm x 124mm x 50mm 

19:Total weight:650g

 

Package includes:

 

1 x ADS1013D oscilloscope host

2 x Matching 100MHz probe(1X and 10X)

1 x 5V2A Charger(Include USB data line)

1 x User manual (English)

 

Micsig TO1152 Digital Tablet Oscilloscope 150MHz 2CH 1G Sa/s Real Time Sampling Rate Automotive Oscilloscopes Kit

To Buy It Click Here

 Features:
 

150MHz  bandwidth, 2 analog channels

1 GSa/s real-time sample rate

28Mpts memory depth

Up to 80,000wfm/s waveform capture rate

Up to 5 hours optional Li-ion battery (Options)

8”TFT LCD & 800*600 pixels high resolution Multi-touch capacity screen Support serial bus trigger and decoding UART, I2C, SPI, CAN and LIN(Options)

Gradient waveform display with 256 intensity levels

7 types of trigger function: Edge, Pulse, Logic, Time Out, Runt, Slope, N Edge, and Video Built-in 8G storage capacity, waveforms and screenshots can be viewed and edited in scope Various I/O port, LAN, Wi-Fi, USB2.0, USB Device, HDMI, Trigger out Support Android and iOS Application and PC software ware remote control

Specification:
 

>>Please Click Here to Download the English User Manual<<

Package includes:
1* TO1152 Digital Oscilloscope
1* Probe
1* Power Adapter
1* User Manual

JinHan JDS3051A JDS3072E JDS3082A Hand-held Digital Oscilloscope 2 Channel Max 500MSa/s Sampling Rate 50-80MHz Bandwidth Oscilloscope With Signal Generator 6000 Counts Digital Multimeter 3 in 1

To Buy It Click Here

Description:

1, 4.5 Inch TFT High-Definition Color Screen

2, One Machine And Multi-Function

3, Long Standby

4, Easy To Carry
5,Oscilloscope + Multimeter + Signal Generator 3 in 1
note: model JDS3072E does not have Multimeter function.

Specifications:

 

MUSTOOL MDS8207 2 in 1 Digital Oscilloscope Multimeter 6000 Counts True RMS DDM 200MHz Sampling Rate 40MHz Bandwidth and One Key Auto HD Screen Display Waveform Storage Oscilloscope

To Buy It Click Here

Descriptions:



Package Includes:

1 x MUSTOOL MDS8207 Multimeter Oscilloscope
1 x One Pair Test Pens
1 x English User Manaul

Details Pictures:

DANIU ADS5012H Digital 2.4-inch IPS Screen Anti-burn Oscilloscope 500MS/s Sampling Rate 100MHz Analog Bandwidth Support Waveform Storage and Built-in Large 5000mah Capacity Lithium Battery

To Buy It Click Here

Description:

The ADS5012H is a versatile, highly practical, cost-effective handheld oscilloscope for the maintenance industry and the R&D industry with AARONTEK's real-time sampling rate of up to 500MS/s and 100MHz analog bandwidth. With full trigger function (single, normal, automatic), it can be used freely for both periodic analog signals and non-periodic digital signals. The built-in high voltage protection module can withstand up to 400V continuous voltage and 600V peak voltage. Don't worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position. Large time base scan mode that monitors slow level changes. Equipped with high-efficiency one-button AUTO, the measured waveform can be displayed without complicated adjustment. Display high-definition LCD screen with 2.4-inch 320*240 resolution IPS full-vision technology, the visual effect is very good, not eye-catching, almost all oscilloscopes on the market use cheap TN screen, the screen is white, the color difference is serious, the eyes fatigue. Extremely convenient and fast waveform storage function, built-in 64M storage space, can store up to 2000 waveform pictures, the storage process is simple and fast, save the current waveform anytime and anywhere, just one touch, no cumbersome tips and choices, quietly It is very convenient to save the current waveform. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more. Built-in 5000mah high-quality lithium battery, can be used continuously for 12 hours when fully charged. The body is equipped with high-quality silicone protective cover, non-toxic and lead-free environmental protection, anti-skid, anti-shock and shockproof, comprehensive protection of the fuselage, soft texture, feel very comfortable.

 

Key Features:

 

1:Intelligent anti-burn,1X Can withstand up to 600V withstand voltage

2:Afterglow display technology

3:2.4 inch color display screen with IPS technology

4:100MHz analog bandwidth @ 500MS/s sampling rate(1X = 5MHz,10X = 100MHz)

5:One-button waveform storage

6:Built-in 64M storage space, the maximum storage of 2000 waveform pictures

7:Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions

8:High measurement voltage range, 1X can measure 0 ~ 80 V, 10X can measure 0 ~ 800V

9:Up to 12 parameters measurement:VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Time

10:At any time, the waveform display (pause function) is frozen

11:Equipped with high efficiency One-button AUTO

12:Complete triggering function (single, normal, automatic)

13:Built in 5000mAh rechargeable lithium battery,Fully charged for 12 hours of continuous use

14:Screen brightness adjustment

15:Memory compression technology, waveform refresh screen does not flicker

16:Anti-slip anti-drop silicone sleeve

17:Ultra small volume, easy to carry

 

Specifications:

 

1:Analog band width: 100MHz

2:Maximum real time sampling rate: 500MS/s

3:Vertical sensitivity: 50 mV/div ~ 100 V/div

4:Horizontal time base range: 50S/div ~ 6nS/div

5:Maximum test voltage: 80 V (1X probe), 800 V (10X probe)

6:Storage depth: 128KB

7:Input resistance: 1M

8:ADC precision: 8bits

9:Coupling mode: AC/DC

10:Trigger mode: Single, Normal, Auto

11:Trigger edge: Ascending/descending edge

12:External trigger voltage 0 – 80 V

13:Display: 2.4 inch - 320*240 - IPS process

14:Power supply: 5000 mAh lithium battery

15:Size: 114mm x 74mm x 33mm 

16:Weight: 300g

MINI DS213 Digital Storage Oscilloscope Portable 15MHz Bandwidth 100MSa/s Sampling Rate 2 Analog Channels+2 Digital Channels 3 Inch Screen With Logic Trigger

To Buy It Click Here

Description:

DS213 is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering task and it is based on ARM Cortex M3 core. DS213 uses FPGA to manage external ADC’s control and data cache mode. It provides 4 application partitions for loading and upgrading up to 4 different application firmware. It also has built-in 8MB USB flash drive for storing waveforms and upgrading system firmware. The oscilloscope code application layer is open source, and users can develop oscilloscope firmware according to their needs

Features:

l Mini size, light weight, portable and handheld;
l It can store waveforms, making waveform analysis clearer and more effective;
l Multiple trigger modes, support Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger;
l Powerful ability to process waveforms, it can automatically measure parameters such us voltage, frequency and pulse width.

Specifications:

CPU: ARM Cortex M3
FIFO & Control: FPGA
ADC: HWD9288-100
Analog Channels: 2([CH_A] [CH_B])
Digital Channels: 2([CH_C] [CH_D])
Operation Channel: INV [CH_A], INV [CH_B], [CH_A]+[CH_B], [CH_A]-[CH_B],[CH_C]&[CH_D],[CH_C] | [CH_D]
Vertical Sensitivity: 10mV-10V/div (1-2-5 STEP) (using X1 probe)
                100mV-100V/div (1-2-5 STEP) (using X10 probe)
Vertical Resolution: 8 bits
Sample Memory Depth: 4 channels, 4*4K
Coupling: DC, AC
Max Input Voltage: ±40Vpp (using X1 probe)
                 ±400Vpp (using X10 probe)
Trigger Types: Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger
Trigger Mode: Auto, Normal, Single, Slow
Trigger Source: [CH_A] [CH_B] [CH_C] [CH_D]
Signal Source: Square Wave: 10Hz to 8MHz, in total 20 shifts and 3 Vpp Signal Sources;
Sine/Triangle/Sawtooth Wave: 10Hz to 20MHz, in total 11 shifts and 3 Vpp Signal Sources
Storage: built in 8M USB disk
File Types: BMP,BUF,CSV
Auto Measurement Types: Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average
Cursor Measurement: Time value, Amplitude value
Display Modes: 4 wave lines: Line 1: [CH_A], HIDE
Line 2: [CH_B], HIDE
Line 3: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE
Line 4: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D], HIDE
Sampling Mode: Real-time Sampling
Sampling Rate: 100M Sa/s
Battery: 1000mAh
Size: 99.5mmx58.5mmx13.5mm
Weight: 129g (with battery)
Certificate: CE, FCC

 

Package Includes:

1 x DS213 oscilloscope
2 x Test Proes
1 x one Set of accessories

DSO NANO PRO Handheld Oscilloscope 30MHz Bandwidth 200M Sampling Rate 2.4 Inch IPS Full Vision Screen 320*240 Resolution Technology Built-in 64M Storage Built-in 3000mah Lithium Battery

To Buy It Click Here

Features:

DSO NANO PRO is a full function, high utility, high performance and cost-effective handheld oscilloscope for the maintenance industry and the R & D industry.The oscilloscope has a real-time sampling rate of up to 200MS/s and a 30MHz analog bandwidth. With complete triggering function (single, normal, automatic), both the periodic analog signal and the aperiodic digital signal can be used freely.Large time base scanning mode can monitor slow level changes. Equipped with high efficiency one button AUTO, the measured waveform can be displayed without complicated adjustment.Display the High Definition LCD screen equipped with 2.4 inch 320*240 resolution IPS full vision technology, the visual effect is very good, eye protection, the oscilloscope on the market is almost used cheap TN screen, screen fan white. Extremely convenient and fast waveform storage function, built-in 64M storage space, the maximum storage of 2000 waveform pictures. Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions. Built in 3000mAh rechargeable lithium battery can be continuously charged for 10 hours at one time. Day mode and night mode can be changed according to their own preferences.

Specification:
 

Analog band width: 30MHz

Maximum real time sampling rate: 200MS/s
Time base range: 50s~125ns
Triggering function:single, normal, automatic(both the periodic analog signal and the aperiodic digital signal can be used freely.)
Storage depth: 128KB
Input resistance: 1M
Auto function:support
Voltage accuracy: ±2%
Frequency accuracy: ±0.01%(high-precision)
Cursor type:Level X, level Y, trigger Y
Standby time: 10 hours
Measurement parameters: 11 kinds
Afterglow effect: 1~8 level (Adjustable)
Vertical sensitivity: 50mV/div ~ 200V/div
Maximum input voltage: 40V (1X probe), 800V (10X probe)
Coupling mode: AC/DC
Trigger edge: ascending / descending edge
Scan mode: support
Waveform Manager: support
Waveform storage: maximum storage of 2000 waveform pictures(Support thumbnail browsing, viewing, details view, flip, delete and other functions)
Power: built in 3000mAh rechargeable lithium battery
Size: 90mm x 70mm x 28mm

Screen indicator

1. 1X/10X mode indicator icon, this must be consistent with the 1X/10X switch settings on the probe handle, if the probe is 1X, then the oscilloscope will also be set to 1X, 1X input is the most able to measure the 40V voltage, 10X can measure 800V, do not enter the 40V voltage under the 1X probe, otherwise the oscilloscope will burn out.
2. Measured signal waveform
3. Baseline indicator icon, which indicates the position indicates the current position is 0V voltage.
4. Direction keyboard mode icons
5. Trigger edge indication Icon
6. Peak and peak of measured waveforms
7. The frequency of the measured waveform
8. Background dashed grid can be set or closed in MENU.
9. Trigger voltage indicator icon
10. Horizontal position of waveform
11. Residual power icon, green indicates residual power, contains arrows indicating that it is currently charging.
12. Trigger mode indicator icon, Single means single trigger, Normal means normal trigger, Auto means auto trigger.
13. Input coupling mode indicator, AC means AC coupling, DC means DC coupling.
14. Horizontal time base, which represents the length of time in a horizontal direction.
15. Run the pause indicator icon, RUN means running, STOP indicates a pause.
16. Vertical sensitivity, representing the voltage represented by a large grid in the vertical direction.

Direction keyboard mode description

>Click the "MODE" button to turn the function of the upper and lower left and right keyboard in turn, and the display of the corresponding function icon in the lower left corner of the screen will be divided into three modes.
>[icons] for the zoom mode of the waveform, that is to adjust the vertical sensitivity and time base. Under this mode, the upper and lower keys adjust the vertical sensitivity (the amplification or attenuation of the signal), and the left and right keys adjust the time base (sampling rate).
>[icons] as the movement mode of the waveform, the waveform moves along with the direction indicated by the key, but only the vertical moving wave can not move right and left in the single / normal trigger mode, because the trigger point clock starts at the left starting point.
>In this mode, the upper and lower keys adjust the voltage threshold, the left key set triggers the edge as the drop edge, and the right key sets the trigger edge to the rising edge.

Package includes:

1 x DSO NANO PRO Oscilloscope

1 x 40MHz 10X Probe (3.5mm Turn BNC Switch Head)

1 x MINI USB Data Line

1 x English User Manual