SUNKKO 737U 18650 Battery 220V Digital Display 2800W Testing Charge Spot Welder Welding Machine

To Buy It Click Here

Specifications:
Input voltage: AC 220V+10V%
Primary current: 2A-15A
Power: 2800W
Single pulse welding: 0.05-0.1mm nickel strip
Double pulses welding: 0.12-0.15mm nickel strip
Size: 200x140x245mm

Usage:
-- The first and second digit show the volume of current. Press"*"key,the first digit will blink, that means the parameter could be adjusted through "UP"and"DOWN". Press"*"again to confirm.
-- He second digit will blink, that means the parameter could be adjusted through "UP" and "DOWN". Press"*" again to confirm.
-- P2 or P1 will blink for selecting. Please select P2 or P1 through"UP"and"DOWN"to select pulse. P2 means welding once in 2 times. P1 means welding once in 1 time.
-- Press"*"again to confirm.The spot welder can start to operation when the digits not blink.
-- Please select higher current power to weld material which is thickerthan 0.1mm.And adjust suitable welding pressure.
-- Please refer the sheet to setting current and pulse.

Notices for using SUNKKO spot welding machine 

1.In order to obtain good weld effect, please don't use the active socket, 

  and should be used the wall socket to ensure stable power supply.

2.Because of the instant welding large current,rated current of tripping 

  device of the leakage protection switch should be up to 40-63A.Lower 

  than 40A will cause tripping.   

3.Please set the pressure adjuster to the right parameter to avoid 

  welding effect in not good. 

4.Please keep the surface of welding pins clean and wipe off oxide with 

  sand paper.

5.Please keep the welding pin in sharp shape.

6.Please do not worry about the lighting in flash. Spot welder is a high 

  power machine and discharging high current instantaneously. 

  Because this moment is in 20ms and it is normal.

Package Included:
1 x Set of Spot Welder 

1.9KW SUNKKO S709A 220V 50Hz 70B Battery Spot Welding Tools Soldering Spot Welding Machine

To Buy It Click Here

Package Included:

1 x S709A Machine

1 x User manual

1 x Welding pen

1 x Soldering stand

1 x Soldering iron

1 x Pedal switch

4 x Welding needle(for fixed head)

2 pairs Welding needle(for welding pen)

1 x Wrench

2 x Fuse tube

1 x Battery holder

30 x Nickle plated(0.1x4x100mm)

30 x Nickle plated(0.15x5x100mm)

30 x Nickle plated(0.2x5x100mm)

30 x Pure nickel(0.15x8x100mm)

Specification:

 

-Scope of application:

Lead sheets of rechargeable battery can be welding rapidly.

The production,installation,welding of lithium battery or mobile power.

The welding of lead sheets and wires from metal parts.
 

-Soldering iron part:

Temperature:150℃~450℃

Power:50W           

Output voltage:20VDC

-Spot weld-er part:

Supply voltage: AC220V±20V

Power: 1.9KW (Instantaneous)     

Current: 500A      

Time of double pulse: 1~10ms (adjustable)

Time of four pulses: 2~20ms (adjustable)

Time of eight pulses: 8~80ms (adjustable)

Size:140x245x200mm

Net weight:5.5kg

 

Features:

1.The machine is a combination of battery spot welding and Circuit board sol-der,that make your work more convenient.

2.fixed spot-welding head and mobile spot-welding pen are combined together in one machine,so that the welding will become flexible.

3.Possess the function of 2,4,6,8 welding pulses selection, make the sol-der joint reliable.

4.Possess welding current rapid regulator,selecting the current will become quick and efficient.

5.The anti-static soldering station which controls the temperature accurately,it is suited for welding any intergrated circuit or wiring.

6.The removable footswitches can satisfy the requirement of welding position or sophisticated technology.

7.The fixed spot-welding head has pressure regulating device which makes the sol-der connections more reliable. 

 

Features:

1.The machine is a combination of battery spot welding and Circuit board sol-der,that make your work more convenient.

2.fixed spot-welding head and mobile spot-welding pen are combined together in one machine,so that the welding will become flexible.

3.Possess the function of 2,4,6,8 welding pulses selection, make the sol-der joint reliable.

4.Possess welding current rapid regulator,selecting the current will become quick and efficient.

5.The anti-static soldering station which controls the temperature accurately,it is suited for welding any intergrated circuit or wiring.

6.The removable footswitches can satisfy the requirement of welding position or sophisticated technology.

7.The fixed spot-welding head has pressure regulating device which makes the sol-der connections more reliable.

SUNKKO 737U Battery Spot Welding Machine Handheld Welding Battery & Testing & Charging Function

To Buy It Click Here

Description:

SUNKKO 737U Battery Spot Welding Hand Held Welding Machine Welding battery & Testing & Charging Function

Great item for most small battery packs welding.Dual modes intelligent frequency conversion pulse spot welder.

Specification:

-Welding part:

Input voltage:220V/110V AC

Power:2.8KW(Instantaneous)

Single pulse time:0.5-5ms(Variable)

Double pulse time:1-10ms(Variable)

Welding thickness:0.05-0.15mm

-Charging part:

Output voltage:5V

Output current:0-3A(Max)

Output power:38W(50W Instantaneous)

Voltage stability:≤1.5%(Setting)

Constant current accuracy:±2.5%(Setting)

Measurement error:≤ 1.5%(Setting)

Size:37*21*32cm

Net Weight:5.5kg

Features:

* 3 USB ports for output

* Charging and testing for 1 lithium battery

* Fast welding lithium battery pack by fixed welding head

* It is easy to know fast or slow charging

* Machine handle, convenient to move

* Welding needle pressure regulator

* Setting current quickly

* LED light function

* Setting welding parameter and pulse selection
 

Package Included:

1 x 737U Machine

4 x Welding needle

1 x Wrench

2 x Fuse tube

1 x Fixture for 6 batteries

2 x Charging wires

30 x Nickle plated(0.1x4x100mm)

30 x Nickle plated(0.15x5x100mm)

SUNKKO 737G 110V Battery Spot Welding Hand Held Welding Machine with Pulse & Current Display

To Buy It Click Here

Description:

SUNKKO 737G Battery Spot Welding Hand Held Welding Machine with Pulse & Current Display

Great item for most small battery packs welding.Dual modes intelligent frequency conversion pulse spot welder.

Specification:

Color:Black

Voltage input:AC 110V±10V

Primary current:2A-15A

Welding current:50A-800A

Welding pressure:200g-700g

1 Pulse:0.05-0.12mm

2 Pulse:0.12-0.2mm

Size:140x245x200mm

Package Size:215x370x310mm

Net weight:4.3kg

Gross weight:5.5kg

Features:

* Dual modes

* Current setting

* Pressure setting

* Pulse selecting

* LED light

* Pulse & current display

* Foot switch to calibration

Package Included:

1 x 737G machine

1 x Manual

1 x Foot pedal control

4 x Welding needle

1 x Hex wrench

1 x Battery holder

2 x Fuse tube

30 x Nickel plated(0.1x4x100mm)

30 x Nickel plated(0.15x5x100mm)

30 x Nickel plated(0.2x5x100mm)

30 x Nickel plated(0.18x5x100m)

#SUNKKO #709AD+ 220V 1.9KW Pulse Spot Welding Machine Battery Spot Soldering Machine

To Buy It Click Here

 

Features:
 

4 in 1 machine.

Fixed pulse welding.

Constane temperature soldering.

Inductive discharging welding.

Moveable pulse welding.

The whole new inductive discharging weiding mode. It is no need to be controlled by pedal control to weld.

It will weld immediately when welding head touch weiding object.

It is controlled by micro-computer for precise welding and increased welding consisitency in welding power controller.

4 in 1 design for welding and soldering in one machine with multifunction to make electronic product.
 

There are fixed welding head and moveable welding pen mode to suit for little component and large parts to weld.

It can be adjusted high power in 1200A for welding head to weld 0.35mm nickle plating.

It is energy management and save energy output.

There are 2-18 pulse to select that can weld different thickness.

The welding pen is very easy and convenient to use.

The knob for adjusting pulse and electric current is convenient to change pulse and electric current.

Double row with LED display is clearly to detect data.

T12 soldering iron can solder in fast and use longer.

It is suitable for welding different nickle material.

It is suitable for any luminance of lighting circumstance with LED illumination design.

 

Specification:
 

Welding part:

Supply voltage: AC 220V/110V±20V

Power: 1.9KW (Instantaneous)

Welding Current: 500A

Time of 2 pulse: 1-10ms(Adjust)

Time of 4 pulse: 2-20ms(Adjust)

Time of 8 pulse: 8-80ms(Adjust)
 

Soldering Part:

Soldering temperature: 150℃-450℃

Temperature accuracy: ±5℃

Output voltage: 20VDC

Power: 50W

Heating up time: 6-8s to 300℃

Size: 140 x 245 x 200mm

Net weight: 7kg

 

Package Included:
 

1 x S709AD+ Machine

1 x User manual

1 x Welding pen

1 x Soldering iron

1 x Soldering iron shelf

1 x Pedal control

4 x Welding needle(for fixed head)

2 x Welding needle(for welding pen)

1 x Wrench

2 x Fuse tube

1 x Electric grinding machine

1 x Battery fixture

50 x Nickle plating

SUNKKO 787A+ 220V Pulse Spot Welding Machine Power Tool Battery Charger

To Buy It Click Here

Features:

 

* Double pulse micro-computer spot welding and battery charger, that's the first technology in the world.

* Micro-computer control up to level 199(99x1;99x2), precision parameter setting.

* There have one or two pulse to choose to faster welding.

* It have two current setting to fast set welding current. The maximum up to 16 pulse, Suit for welding thicker material.

* The charging part has 4.2V-15V to continuously regulated, it satisfied for most single and assembled battery to charge.

* It have foot switch and pressure adjuster, that improve the accuracy of welding.

 

Specification:
 

-Welding part:
 

Input voltage: AC 180-240V

Power: 1.5KW(Instantaneous)

Time of 1 pulse: 0.5-5ms(Adjust)

Time of 2 pulse: 1-10ms(Adjust)

Welding current: 50A-500A

Welding ability: 0.05-0.2mm
 

-Charging part:

Output voltage: 4.2V-15V

Output current: 0-2A(Max)

Output power: 38W(50W Instantaneous)

Voltage stability: ≤1.5%(Set value)

Constant current accuracy: ±2.5%(Set value)

Size: 140 x 245 x 200mm

Net Weight: 4.3kg

Package Included:
 

1 x S787A Machine

1 x Pedal switch

4 x Alumina copper needle

1 x Spanner

2 x Fuse 20A

1 x Connector

1 x Battery holder

30 x Nickle plated(0.1x4x100mm)

30 x Nickle plated(0.15x5x100mm)

30 x Nickle plated(0.2x5x100mm)

30 x Pure nickel(0.15x8x100mm)

SUNKKO 709AD+ 220V 1.9KW Pulse Spot Welding Machine Battery Spot Soldering Machine

To Buy It Click Here

 

Features:
 

4 in 1 machine.

Fixed pulse welding.

Constane temperature soldering.

Inductive discharging welding.

Moveable pulse welding.

The whole new inductive discharging weiding mode. It is no need to be controlled by pedal control to weld.

It will weld immediately when welding head touch weiding object.

It is controlled by micro-computer for precise welding and increased welding consisitency in welding power controller.

4 in 1 design for welding and soldering in one machine with multifunction to make electronic product.
 

There are fixed welding head and moveable welding pen mode to suit for little component and large parts to weld.

It can be adjusted high power in 1200A for welding head to weld 0.35mm nickle plating.

It is energy management and save energy output.

There are 2-18 pulse to select that can weld different thickness.

The welding pen is very easy and convenient to use.

The knob for adjusting pulse and electric current is convenient to change pulse and electric current.

Double row with LED display is clearly to detect data.

T12 soldering iron can solder in fast and use longer.

It is suitable for welding different nickle material.

It is suitable for any luminance of lighting circumstance with LED illumination design.

 

Specification:
 

Welding part:

Supply voltage: AC 220V/110V±20V

Power: 1.9KW (Instantaneous)

Welding Current: 500A

Time of 2 pulse: 1-10ms(Adjust)

Time of 4 pulse: 2-20ms(Adjust)

Time of 8 pulse: 8-80ms(Adjust)
 

Soldering Part:

Soldering temperature: 150℃-450℃

Temperature accuracy: ±5℃

Output voltage: 20VDC

Power: 50W

Heating up time: 6-8s to 300℃

Size: 140 x 245 x 200mm

Net weight: 7kg

 

Package Included:
 

1 x S709AD+ Machine

1 x User manual

1 x Welding pen

1 x Soldering iron

1 x Soldering iron shelf

1 x Pedal control

4 x Welding needle(for fixed head)

2 x Welding needle(for welding pen)

1 x Wrench

2 x Fuse tube

1 x Electric grinding machine

1 x Battery fixture

50 x Nickle plating

Sunkko S788 Pulse Spot Welding Machine Rechargable with LED Battery Testing Charging Function

To Buy It Click Here

Package Included:

1 x S788H Machine

1 x Pedal switch

4 x Alumina copper needle

1 x Spanner

2 x Fuse 20A

1 x Connector

1 x Battery holder

30 x Nickle plated(0.1x4x100mm)

30 x Nickle plated(0.15x5x100mm)

30 x Nickle plated(0.2x5x100mm)

30 x Pure nickel(0.15x8x100mm)

 

Feature:

* There have one or two pulse to choose to faster welding.
* It have foot switch and pressure adjuster,that improve the accuracy of welding. 
* Micro-computer control up to level 199(99x1;99x2),precision parameter setting.
* Double pulse micro-computer spot welding and battery charger,that's the first technology in the world.

* It have two current setting to fast set welding current.The maximum up to 16 pulse,Suit for welding thicker material.
* The specific battery tester can test the float charge voltage,it convenience to choose the appropriate voltage to charging.

* The charging part has 4.2V-36V to continuously regulated,it satisfied for most single and assembled battery to charging and testing.

 

Specification:

-Welding part:

Input voltage:220V

Power:1.5KW(Instantaneous)

Time of 1 pulse:0.5-5ms(Adjust)

Time of 2 pulse:1-10ms(Adjust)

Time of 16 pulse:0-80ms(Adjust)

Welding ability:0.05-0.25mm
 

-Charging part:

Output voltage:4.2V-36V

Output current:0-3A(Max)

Output power:38W(50W Instantaneous)

Voltage stability:≤1.5%(Set value)

Constant current accuracy:±2.5%(Set value)

Measurement error:≤ 1.5%(Set value)

Size:140x245x200mm

Net Weight:4.3kg