QC3.0/2.0/MTK/FCP/IWATT/PD Test Board/Tempter/Fast Charge Protocol PD Controller Full Protocol USB Tester

To Buy It Click Here

Description:

1. The code switch guides the type of power-on protocol

2. Power-on automatic cycle test.

3. Press the button to exit the automatic cycle test

4. Press the up button, the voltage rises, press the down button voltage drops

5. In the PD state, the up/down keys are all up cycle test functions.

6. The test current has nothing to do with the test board, it is related to the adapter.

7. Large USB male, MICRO, TYPE-C, D+/D- at the three inputs are all connected, can test QC3.0/QC2.0/MTK/FCP/IWATT

8. Output USB socket directly connected to the load / resistor

9. The code switch is in the 000 state, only the voltage and current are tested, and D+/D- is not added.

10. There is no load current, the battery grid does not run, when there is load current, the the battery grid is running.

11.PD test type:

1. 3A-cy2211: 5V 9V 12V 15V 18V 20V

2. 5A-cy2211: 5V 9V 12V 15V 16V 18V

3. ASUS: 5V 9V 12V 15V 20V

4. Apple 29W: 5V 14.8V

5. Imitation apple 29W: 5V 9V 12V 15V

6. Apple 87W: 5V 9V 20V

7. Imitation apple 87W: 5V 9V 20V

8. UGREEN : 5V 9V 15V 20V

9. Le Derui: 5V 9V 14.8V

10. Cypress 2134: 5V 9V 12V 15V 20V

11. IP6518: 5V 9V 12V

     IP6518: 5V 9V 12V 15V 20V

12.IP2712: 5V 9V 12V 15V 20V

13.CSS34P16: 5V 9V 12V 15V 20V

14.FL5002: 5V 12V 15V 20V

15.SW6106: 5V 9V 12V

16.LT2201P: 5V 9V 12V

17.IP5328PD 5V 9V 12V (with current test below 300MA)

18.IP6510 5V 9V 12V

19. Lenovo 65W 5V 9V 15V 20V

Fast charge test operation method:

 

1>> Input port: USB male, connect charger or mobile power output port, MICRO can also be used as input port (when connecting data cable, you must use fast charge data line).

 

2>> Output port, orange large USB socket, load can be connected with high power resistor (100W/5 ohm--100W--50 ohm), can also be connected to the load meter to adjust the load size, the output current is determined by the load size The JL-001 test board supports 5A current test, please feel free to use it.

 

3>> JL-001 supports five fast charging protocols: 001=QC2.0, 010=QC3.0, 011=MTK, 100=IWATT, 101=FCP. First, according to the fast charging protocol of your own products, through the different settings of the white dial switch, it is guaranteed to be consistent with the fast charging protocol of its own products.

 

4>> When the fast charge protocol of the white dial switch is set to match the product agreement, the test can be started. The USB male plug is inserted into the output of the product, the black film is lit, and the JL-001 black switch is adjusted. ). The display voltage changes, indicating that the protocol handshake is successful, and the display current is determined by the load adjustment size.

 

5>> QC3.0 test: white dial switch setting 010=QC3.0, USB male plug in QC3.0 charger screen lights up 5.2V, after 2 seconds, the voltage starts to rise automatically to 12, automatically drops to 3.6V, when pressing the UP or DP button, the voltage will be fixed at the current voltage value, no longer jump, and then press the button, the voltage will jump according to the change of 0.2V, then the QC3.0 test is completed.

 

6>> Note that when testing three fast charging protocols, QC3.0, MTK, and IWATT, the load must have a current of 500MA, otherwise the test will be interrupted.

Package Includes:

1 x USB Tester

QC2.0 3.0 Type-C PD3.0 FCP AFC SCP MTK Fast Charge PD Protocol Controller Test Board USB Tester

To Buy It Click Here

Description:

Multi-function fast charge protocol  controller instructions:

 

The Controller code is as follows:

 

0000: monitor, only shows the current and voltage, do not fast charge control

0001: FCP, conducts Huawei FCP fast charging protocol control

0010: Fast Charge Agreement for SFCP Spreadtrum

0100: QC2.0

0101: Huawei SCP Super Fast Charge Protocol

0110: Enter PD mode
1000: QC3.0

1001: MTK1.1 must carry more than 500mA load to enable MTK fast charge control

1100: Samsung AFC Fast Charge Protocol

1101: MTK2.0, must carry more than 500mA load to carry out MTK fast charge control
 

How to use the DIP switch:

 

1. The DIP switch needs to be switched to the correct mode to work normally. All of them can be dialed 0000 to enter the monitor mode. In the monitor mode, the SWITCH button can be used to switch the fast charge protocol. Except for the typec PD protocol, the SWITCH button can be used. Switch

 

2. To test the PD protocol, you must dial the DIP switch to 0110, and then you must insert the C in typec port to test the PD protocol. After entering the PD test mode, the controller can read the PDO information of the source broadcast. And scrolling on the first line of the display;

 

3. Only after entering the corresponding fast charge protocol test mode, the “+” and “-” buttons can raise or lower the voltage;

 

4. Please note, in the fast charge test mode, the output terminal will have a voltage greater than 5V. Please ensure that the devices connected later can support voltages higher than 5V.

 

5. You can use the DIP switch to switch functions, or you can use the button to switch functions.

 

 Key Function:

 

"SWITCH": used to select the fast charge protocol

"-": reduce the voltage

"+": increase the voltage 
 

Note:

 

The PD function can only be accessed through the DIP switch.

Package Includes:

1 x USB Tester

WEB-U2 Current And Voltage Meter USB Tester QC4+ PD3.0 2.0 PPS Fast Charging Protocol Capacity Test

To Buy It Click Here

Features:

►6-bit high-precision display, 5/6-bit one-button switching, support for external HID power supply
►USB HID externally independent power supply, can be started at 0V, and can measure low voltage
►Low-voltage nickel-metal hydride battery measurement
►Support HAWEI FCP SCP Broadcast dynamic adjustment
►Apple device charging acceleration
►Gravity sensing,automatically rotates the screen
►Test the internal resistance of the wire
►Charging protocol speculation demonstration
►Two-way Current Detection
►Apple PD Charger SN Serial Number Detection
►PD E-Marker Wire detection
►PD3.0 PPS QC4+ detection trigger
►PD sniffing, monitoring, communication packet tracer mode
►Support English display ,can download the user manual from the QR code of the product,

 
Specifications:

Type:	WEB-U2 Current Voltage Meter	Voltage:	DC 4~24V
Master chip:	STM32F072 ARM Kernel	Current:	0-5A
Display:	1.77inch TFT screen 128 * 160 Resolution	Voltage Resolution:	0.0001V
Size:	52.5 * 34.5 * 13mm(Prox.)	Current accuracy:	Range 0.1%±nd
USB interface:	USB2.0 5P male  USB2.0A female	Ann time capacity:	99999Ah(6 groups)
MicroUSB:	PC Input ,PC USB HID	Ann time resolution:	0.0001Ah
TYPE-C:	2PC IN and OUT	Ampere-hour capacity:	99999Wh(6 groups)
Button:	OK and M key	Watt time resolution:	0.0001Wh
Temperature Sensor:	one inside, can be connected to the second (optional)	Power on time:	100 hours
Temperature Measurement:	-40℃~180℃	Charging time:	100 hours
D+D-Voltage:	Support measurement	Built-in load:	built-in current to small load MTK
Fast charge protocol:	Support detection trigger	Bluetooth module:	Bluetooth 4.0 wireless module(Optional)
FD trigger:	PD2.0 PD3.0 PPS QC4+E-Marker	Firmware upgrade:	USB HID free drive
Memory:	FRAM ferroelectric (10 billion brush write life)	PC host computer:	USB HID free drive
Static power consumption:	Turn off the screen, close the data port < 10mA	Force sensor:	Built-in 3-axis gravity sensor
Internal resistance:	connected to the USB interface 35mΩ(Prox.)
Serial number:	Built-in independent SN body identification serial number

Package Includes:

1 x  WEB-U2 USB Tester
 

ESCAM PVR002 2MP 1080P PTZ 4X Zoom 2.8-12mm Lens Waterproof POE Dome IP H.265 Camera Support ONVIF IR distance 15m Private Cloud Protocol

To Buy It Click Here

Features :

1. H.265 2MP HD 1080P.

2. Support private cloud protocol, it can be added to PVR204 or PVR208 remotely or locally.

3. Support PTZ, 4X Zoom, 2.8-12mm Lens.

4. Support Day/Night, IR distance 15m, make your night view as daytime.

5. Support motion detection/email alarm/app push.

6. Support PoE function.

7. Support 3D Digital Noise Reduction.

8. Supprt max to four private mark areas.

9. IP66 waterproof.

10. Support CMS viewing, APP viewing and Brower viewing.

11. Support ONVIF, compatible with other devices.

Specification :

Model	ESCAM PVR002
Camera
Sensor	1/2.7” 2 Megapixel progressive can CMOS
Electronic shutter	Automatic/Hand movement, 1/25~1/10000s
Minimum illuminance	Color 0.1Lux@F1.2;Night vision0.01Lux@F1.2
Focal Length	2.8~12mm
PT	P 355°  T 90°
Functions
Day/night switch	IR distance 15m
White Balance	Auto white balance
BLC	Support  BLC
Digital noice reduction	Support 3D noise reduction
WDR	Support D-WDR
Motion detection	Support motion detection
Private shelter	Support 4 zones
OSD	Support OSD setting
Sleeper	Support schedule reboot
Video
Compression	H.264&H.265
Resolution	Mainstream:1080P(1920*1080), 720P(1280x720)
	Substream: D1 (704*576), 360P(640x360), CIF (352x288)
Video frame rate	25fps(50HZ), 25fps(60HZ)
Biterate	64Kbps~12Mbps CBR/VBR adjustable
Video adjustment	brightness,saturability,chromacity adjustment
Network
Ethernet	RJ-45 (10/100Base-T)
IP Type	Dynamic IP&Static IP
Network Protocol	HTTP,TCP/IP,IPv4,UPNP, RTSP,SMTP,NTP,DHCP,DNS,PPPOE, DDNS,FTP
Access Protocol	Support ONVIF
Max user	6
Client	iPhone, iPad, Android, Windows PC
Audio
Audio	Not support
General
Power Supply	DC12V1A
PoE Function	PoE (IEEE802.3af/at)
Power Consumption	6W
Working Environment	-30°C to +60°C, 10%-90%
Waterproof	IP66
Product Size	110*110*100mm
Product Weight	0.48kg
Package Dimension	135* 135*130mm
Package Weight	0.7kg

Package includeds :

1 x ESCAM PVR002 IP Camera

1 x Waterproof Hat
1 x Screw Bag
1 x Base
1 x Power Adapter
1 x User Manual