BSIDE ADM92CL PRO Color LCD Digital Multimeter 6000 Counts TRMS Auto-Range Voltage Amp Ohm Hz Cap Temp Diode Continuity Tester

To Buy It Click Here

I'm ADM92CL PRO Color Screen Army Knife Style Digital Multimeter.
 

I was designed by BSIDE for electricians to provide key measurement features—current, resistance, continuity, frequency, and capacitance—along with integrated non-contact voltage detection, temp test and color screen. Just what you need to work more effectively productively.

 

Do you know why I am called the army knife style multimeter?

 

I can working in a variety of work environments, home circuit repair, outdoor aerial work all not problem. I have a pen slot on the side, put the pen in my slot, you can operate with one hand, convenient and concise, one hand can switch any test modes.

 

Do you want to reduce the burden of your tool bag?

 

I can decrease your tool bag burden, because I am an all-in-one product for multimeters and non-contact voltage detectors. And my weight is only 96g. You only need to take me, without need to carry too many tools.

Features:

 

[Upgraded Design]: The upgraded multimeter - now more powerful, it can be used as a multimeter or as a voltage detector.

[6 LED Indicators]: 2 green, 2 yellow and 2 red LED indicators design makes judging the detected voltage strength very easy.

[Color LCD Display Technology]: Vibrant color display engineered by Bside, greatly enhance the reading experience - very easy to read, even in bright sunlight or poor light.

[Activate V-alert at Any Function]: Under any function, convenient to activate V-alert (Non-contact Voltage Detection) function. AC voltage can be detected by built-in sensor or probe.

[High Efficiency]: You can switch all functions with single hand by spinning the knob or pressing the button, can save your test time when compared to other voltage tester/multimeters that require both hands.

 

Specifications:

 

Display: 6000 counts Color Screen

AC current: 60mA/200mA ±(1.0%+3)

DC current: 60mA/200mA ±(0.8%+3)

AC voltage: 6V/60V ±(0.8%+3); 600V/750V ±(1.0%+10)

DC voltage: 6V/60V/600V/1000V ±(0.5%+3)

Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ ±(0.8%+3); 60MΩ ±(1.2%+30)

Capacitance: 6nF±(4.0%+10); 60nF/600nF/6μF/60μF/600μF/6mF ±(4.0%+5)

Temperature: -20℃~1000℃/-4℉~1832℉ ±(1.0%+3)

Continuity: If the resistance is less than 50Ω, the continuity beeper sounds

Power: 1.5V (AAA) * 2 (not included)

Storage temperature: -10℃~60℃

Working temperature: 0℃~40℃

Size: 139.5x49.5x24.5mm

Weight: 96g

 

Package Included:

 

1 x Mini True RMS Multimeter

1 x CAT III 600V Stand Test Leads

1 x Thermocouple 

1 x Protective Drawstring Waterproof Pouch.

1 x User Manual

BSIDE ADM92 Handheld True RMS Digital Multimeter Auto Range 6000 Counts TRMS Tester with Live Wire Check Temp NCV Hz ohm Diode

To Buy It Click Here

Features:

Convenient single-hand side slot design, the test lead can be fixed different direction for various use, such as test lead up-side fixed type for detection, down-side for maintenance, etc.

Live wire check fuction can detective the live wire conveniently and quickly: just put the red test lead into power socket, there will light flash and alert beeper sounds if it is live wire.

V-alert measurement: There is no need to contact tested device directly to prevent any possible danger, just put the multimeter near close to it, it will light flash and alert beeper sounds if indentify AC voltage existence.

Mini size for easy to carry, in your palm or pocket; back clip design make it portable.

Transform measurement between AC voltage/current and frequency by pressing "Hz" button.

Measures AC/DC voltage and current, reistance, diode, continuity

Frequency measurement by terminals (AC voltage/current)

Auto range, Auto power off, data hold, backlight, low battery indication

Specifications:

Display: 6000 counts

AC current: 60mA/200mA ±(1.0%+3)

DC current: 60mA/200mA ±(0.8%+3)

DC voltage: 6V/60V/600V/1000V ±(0.5%+3)

AC voltage: 6V/60V ±(0.8%+3); 600V/750V ±(1.0%+10)

Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ ±(0.8%+3); 60MΩ ±(1.2%+30)

Capacitance: 6nF±(4.0%+10); 60nF/600nF/6μF/60μF/600μF/6mF ±(4.0%+5)

Temperature: -20℃~1000℃/-4℉~1832℉ ±(1.0%+3)

Continuity: If the resistance is less than 50Ω, the continuity beeper sounds

Power: 1.5V (AAA) * 2 (not included)

Storage temperature: -10℃~60℃

Working temperature: 0℃~40℃

Size: 139.5x49.5x24.5mm

Weight: 96g

Package Includes:

1 x Mini True RMS Multimeter

1 x CAT III 600V Stand Test Leads

1 x Thermocouple 

1 x Protect Bag

1 x User Manual
 

VC3280 3999 Display Portable Automatic Range Digital Clamp Multimeter AC DC Voltage Current Resistance Diode Measure Tool

To Buy It Click Here

Descriptions:
 

It’s a kind of portable digital Clamp-Shape meter, with automatic range, which may measure AC & DC voltage, AC current and resistance, diode, continuity buzzer, frequency, temperature. etc.

Features:
 

Display: Maximum display 3999, Update about three times per second

Polar indicator: Negative polarity automatic display

Overload indicator: Display”OL”.

Operating environment: 0C~40C, 75%RH(Max.)

Storage environment: -10C~50C, 80%RH(Max.)

Power supply: (Size AAA, 6f22)1.5VX2(Not Included)

Size: 195X69X28mm

Weight: about 206 gram

Accessories: Manual, battery, test leads, temperature probe

►Click here to dowmload the user manual

Specifications:

Technical Indicators:

Accuracy: ± (% reading + word count)
Ambient temperature with accuracy ensured: (23±5)℃
RH: <75%
1.ACV(V~)

Range	Accuracy
400mV(individual range)/4/40/400V	±(0.8%+10)
750V	±(1.0%+10)

Input resistance: 10MΩ
Frequency: Sine wave and triangular wave: 40~1KHZ,
other wave: 40~200HZ

2.DCV

Range	Accuracy
400mV(individual range)/4/40/400V	±(0.5%+4)
1000V	±(1.0%+6)

Input resistance: 10MΩ

3.Resistance(Auto range)

Range	Accuracy
400/4K/40K/400K/4M	±(1.0%+5)
40M	±(1.2%+10)

4.ACV(Auto range)

Range	Accuracy
400/600A	±(2.5%+8)

Frequency responce: 40~100HZ

5.Duty cycle

Range	Accuracy
0.01%~99.69%	±1%

Above is the result of the 10%~90% duty cycle when resolution below 50HZ.

6.Frequancy Hz (Auto range)

Range	Accuracy
0~10MHZ	±(0.3%+3)

7.Capacitance (Auto range)

Range	Accuracy
40n/400n/4u/40u/1000uF	±(5.0%+8)

8.Temperature ℃/℉

Range	Accuracy
-55℃~400℃	±(3.0%+4)
-67℉~752℉

Package Included:

1 x Clamp Multimeter

Mega328 M328 LCR-T4 12846 LCD Digital Transistor Tester Meter Backlight Diode Triode Capacitance ESR

To Buy It Click Here

Features:

Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components.

Automatic test the pin of a component, and display on the LCD.
Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage.    

Measure the gate and gate capacitance of the MOSFET threshold voltage.

Use 12864  liquid crystal display with green backlight.

One -button operation, automatic shutdown.   

Only 20nA shutdown current.    

Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.    

Automatic identification components pin arrangement .    

Measuring bipolar transistor current amplification factor and base - emitter threshold voltage.    

Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.    

Can detect bipolar transistors and MOS transistors protection diodes.    

Measuring the gate MOS FET threshold voltage and the gate capacitance.    

Can simultaneously measure two resistors and resistor symbol is displayed. Displayed on the right with a decimal value of 4 . Resistance symbol on both sides shows the pin number. So you can measure the potentiometer. If the potentiometer wiper is not transferred to an extreme position , we can distinguish the middle and both ends of the pin.    

Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .    

Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.    

2uF more capacitors can simultaneously measure the equivalent series resistance ESR values. The two can be displayed with a decimal value , resolution 0.01 ohms.    

Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.    

LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.    

Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.    

Can measure a single diode reverse capacitance. If the bipolar transistor connected to the base and collector or emitter of a pin , it can measure the collector or emitter junction reverse capacitance .    

Can be obtained with a single measurement rectifier bridge connection.

 

Specification:

Resistance: 0.1 ohm resolution, maximum 50M ohm    

Capacitor: 25pf -100,000 uf    

Inductors: 0.01mh-20H
Power Supply: 9V battery(Not included)

 

Package Included:

1 x Transistor Tester Diode Triode Capacitance ESR Meter

 

ANENG H01 4000Counts Auto Range Digital Multimeter AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode and Continuity Tester

To Buy It Click Here

Features:

ANENG H01 is a battery-powered, auto-ranging digital multimeter with a 4000 counts, LCD display and backlight. It can be used to measure AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, diode, and continuity.

Operating Mode: Automatic range/manual range
NCV: Yes (AC 12V-1000V)
Diode Test: Yes
Continuity: Yes
Data Hold: Yes
Backlight: Yes
Low Battery Alert: Yes
Auto Power Off: Yes
Display Type:4000
Live Wire Test: Yes
Main Measurement:AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Duty Cycle

Specification:

Brand Name: ANENG
Model Number:H01
Measuring Inductance Range: NO
Dimensions: 148*72*33mm (5.82*2.83*1.3 in)
DIY Supplies: The electrician
AC Voltage: 400.0mV - 4.000V- 40.00V- 400.0V- 750V
DC Voltage: 400.0mV- 4.000V- 40.00V- 400.0V- 1000V
Measuring Resistance Range: 400.0Ω- 4.000kΩ - 40.00kΩ - 400.0kΩ - 4.000MΩ - 40.00MΩ
Measuring Capacitance Range: 4.000nF- 40.00nF- 400.0nF- 4.000uF- 40.00uF - 200.0uF- 400.0uF
DC Current: (A) 4.000A- 10.00A
DC Current: (mA) 40.00mA- 400.0mA
DC Current: (uA) 40.00uA- 400.0uA
AC Current: (A) 4.000A- 10.00A
AC Current: (mA) 40.00mA- 400.0mA
AC Current: (uA) 40.00uA- 400.0uA
Frequency Range: 99.99Hz-999.9Hz -9.999kHz -99.99kHz-999.9kHz-9.999MHz
Operating Temperature:0 - 40 ℃
Battery Type: 1.5V AAA Battery *2 (Excluding batteries)

Warning:

1. Do NOT exceed the “maximum value” indicated in the Specification;
2. Do NOT input voltage at the Current Mode, the Resistance Mode, the Diode Mode, or the Continuity Mode;
3. Do NOT use the product when the batteries or the battery cover is not placed properly;
4. Turn off the product and remove the test leads from the test points before changing batteries or fuses.
Do not input voltage exceeds 36V DC or 25V AC when you are at the setting of measuring current.
Safety Information: ) Examine the connection of the test leads and the insulation of the product before measuring voltage higher than 36V DC or 25V AC.

Package includes:

1 x Multimeter (Excluding batteries)
1 x Test lead (length:100mm)
1 x English User Manual
 

HoldPeak HP-990A/B/C Digital Multimeter SMD Tester Resistance Capacitance Meters Diode Test Professional SMT Component Tester

To Buy It Click Here

Features:

-  HP-990A/B/C is a handheld and battery operated very convenient small Tool, that is specially used to measuring SMD(Surface Mounting Device),there are  resistor, Capacitor, Diode, Zener and LED.
- HP-990A/B/C is designed to meet IEC1010-1 standard and Stipulation of 2-Pollution Grade.
- HP-990A/B/C conform to the European Union's following Requirement:CE regulation 89/336 (EMC Electromagnetic Compatibility).
- The entire outer surface of the Meter case has been with thermo plastic elastomer, and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty.
- HP-990A have the continuity checking function,MAX DC 36V Measurement.
- HP-990B/C have the continuity checking function,battery power Measurement.

990A-General Feature:
● 2999 count LCD display.
● Full automatic measurement:
   Auto scanning the Resistance/Capacitance/ Dilde.
● Function selection by one "FUNC" Push Button
● Data Hold function
● Continuity Checking function
● Zenger diode Test
● LED Test
● DC 36V (MAX) Test
●Specialized SMD TEST or TEST DIP Component with leades.
●Resistance: 300Ω~30MΩ
●Capacitance: 3nF~300mF

990B-990C General Feature:
●3999(only 990B)5999(only 990C) count LCD display.
●Auto ranges.
●Over-rang indication display "OL"
●Zener diode Test
●LED Test
●Battery Power Test
●Specialized SMD TEST or TEST DIP Component with leade.
● Low Batteery Indication
●Resistance: 400Ω~40MΩ(only 990B) / 600Ω~60MΩ(only 990C)
●Capacitance: 4nF~200µF(only 990B) / 9.999nF~99.99mF(only 990C)

Specifications:

Power Supply: 1.5V(AAA)×2  Battery (Not included)
Operating temperature &Humidity:0-40'C(32-104 'F ) &<80%RH
Storage temperature & Humidity:-10-50
perating temperature &Humidity:0-40'C(32-104'F) &<80%RH
Safety Class:IEC1010-1,CAT II
Auto Power OFF:lf the Meter is idle for more than 15 minutes,the Meter
automatically tums the power off.
EMC:According to CE  regulation 89/336.
Dimension(L×W×H) & Weight: 207*36*24mm,Approx.50g


Package Includes:

1 x SMD Tester(batteries not included)
1 x Carring box
2 x Test pin
1 x Pair of test leads
1 x English user manual

Updated MUSTOOL MT8206 2 in 1 Intelligent Digital Oscilloscope Multimeter AC/DC Current Voltage Resistance Frequency Diode Tester Auto/Manual Raging with Analog Bar Graph

To Buy It Click Here

Features:

 

1.Digital multimeter with 200k high-speed A/D sampling, 4000 counts, auto-range, one-button switch of graphical waveform display during measurement

2.High reliability with panel calibration technology and memory calibration, sparing the need for adjustment with potentiometer

3.Storing 100 sets of data and 10 waveforms independently

4.Capable of holding waveform and data during measurement, easy to view and analyze

5.Realizing one-button automatic waveform capture, operator-friendly to learn and operate

6.Displaying historical data and real-time measurement on the same screen with unique record reading mode for easy comparison

7.Effectively eliminating lead resistance, distributed capacitance or interference signals with relative value measurement (clearing)

8.Extending battery life with automatic shutdown function

9.Featuring DC/AC voltage/current, resistance, capacitance/mF (large capacitance)

10.Frequency/duty cycle, diode/continuity test

11.Frequency measurement with 5Hz ~ 5MHz automatic switching range and the maximum input of 380VAC
12.10A AC and DC current measurement with protection against voltage error

13.AC voltage bandwidth up to 20kHz

Package Included:
 

1 x MT8206 Unit
1 x Bag
1 x Pair of Orobes
1 x Operator’s Manual
1 x Package Box