HGLRC Batman220 220mm Airbus F4 OSD FPV Racing Drone w/ 60A BL_32 ESC Frsky XM+ RX BNF

To Buy It Click Here

HGLRC Batman220 220mm Airbus F4 OSD FPV Racing Drone w/ 60A BL_32 ESC Frsky XM+ RX BNF 

Specification:
Brand Name: HGLRC
Model: Batman220
Item Name: 220mm F4 5.8G FPV Racer
Wheelbase: 220mm

Arm Plate Thickness: 5mm

Bottom Plate Thickness: 2mm

Material: Carbon Fiber
Drone Version: BNF ( With Frsky XM+ Receiver & Without Battery)
Net Weight: about 306.3g

Flight Controller	HGLRC F460 Flytower Spare Part FC Item Name: AIRBUS F4 OSD FC (D-Shot Version) MPU: MPU6000-SPI CPU:  STM32F405RGT6, dual 8K Black Box: Flash 16M Input Voltage: 2-6S Lipo  Built-in Betaflight OSD to adjust PID BEC Output: 5V@3A Size: 36x36mm Mounting Hole: 30.5x30.5 ( M3) Weight: 8.3g Support SBUS/PPM/DSMX receiver
Brushless ESC	HGLRC F460 Flytower Spare Part ESC Item Name: 60A BLHeli_32  3-6S 4 In 1 ESC  Input Voltage: 3-6S Lipo battery Con. Current: 60A-4S / 50A-5S / 40A-6S Peak Current: 70A BEC Ouput: NO Firmware: 32bit ESC with BLHELI_32 firmware Size: 36x36mm  (main board )          40x48mm ( including pad) Mounting Hole:  30.5x30.5mm, M3 Weight: 12.9g CPU: STM32F051 MOS Tube:  TOP QUALITY MOSFET Protocol: DSHOT1200/600/300/150/Oneshot125/42 , MultiShotDamped
FPV Transmitter	Item Name: HGLRC GTX585 5.8G 48CH PIT/25/100/200/400/600mW VTX Model: GTX585 Output power: PIT/ 25/ 100 /200/ 400/ 600mW Switchable Control mode:BFOSD control(RX) button BAT: 7-26V BEC: 5V-1A 240mA----400mW Video system: NTSC/PAL Antenna:  MMCX Frequency:  5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ Size: 20x38mm(L*W) Mounting Hole: 30.5x30.5mm Weight: 6.8g
Brushless Motor	Item Name:  HGLRC HF2306 2450KV Motor KV: 2450KV Stator Diameter: 23mm Stator Thickness: 6mm No.of Stator Arms: 12S No.of Rotor poles:14P No-load Current(A/10V):1.6A Motor Resistance:49mΩ Max Continuous Current:41.4A Max Continuous Power:660W Weight:32g Rotor Diameter:28.72mm Shaft Diameter:5mm Body Length:16.1mm Overall shaft Length:29.7mm No.of Cells(Lipo):4S~5S Wire type:20AWG 110mm
FPV Camera	Model: HGLRC XJB-ELF 600TVL 1/3 CCD Camera Image Sensor: 1/3 SONY Super HAD II CCD Horizontal Resolution:  600TVL Lens: 2.3mm Lens FOV: 120 degree(2.3mm) Signal System: PAL S/N Ratio: >60dB(AGC OFF) Electronic Shutter Speed: PAL:1/50 ~ 100,000; NTSC:1/60 ~ 100,000 AutoGain Control(AGC): YES Back light compensation(BLC): YES Min.illumination: 0.01Lux/1.2F WDR: D-WDR DNR: 2DNR Day/Night: Color / Auto / B&W Power: DC 5 to 36V Net weight: 5.2g Dimensions: 19mm * 19mm * 19mm
Propeller	Item Name: HGLRC 5042 5 Inch 3-Blade Propeller Color: Clear White Quantity: 3 CW & 3 CCW
Receiver	Item Name: Frsky XM+ Receiver CH: Up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC) Operating Voltage Range: 3.7~10V Operating Current: 30mA @5V Operating Range: Full range With RSSI output on board: Analog 0~3.3V Firmware Upgradeable Version: International Version Compatibility: FrSky D16 mode Dimension: 21.5*12*3.5mm(L x W x H) Weight: 1.6g

Package Included:
1x HGLRC Batman220 F4 FPV Drone ( BNF Version)
1x Battery Strap
1x HGLRC Pagoda 5.8G 5dBi RHCP Antenna

Flyshark X218 218mm F4 OSD 5.8G FPV Racer w/ 40A BL_32 DShot1200 ESC 48CH 25/200/600/800mW VTX

To Buy It Click Here

Flyshark X218 218mm F4 OSD 5.8G FPV Racer w/ 40A BL_32 DShot1200 ESC 48CH 25/200/600/800mW VTX 

Specification:
Item Name: Flyshark X218 5 Inch 5.8G FPV Racing Drone
Model: X218

Frame Kit	Wheelbase: 218mm Arm Plate Thickness: 4mm Bottom Plate Thickness: 4mm Side Plate Thickness: 3mm Material: Carbon Fiber Color: Black
Flight Controller Integrated with VTX Module	Brand Name: Rcharlance Model: F4 PRO + V2 Item Name: F4 OSD FC AIO VTX Module Size: 36x36mm Mounting Hole: 30.5x30.5mm Net Weight: 12g (not including cable) Flight Controller: Processor: STM32F405 Gyroscope: MPU6000(Reserved external gyroscope interface) Barometer: BMP280 Firmware: Betaflight OMNIBUS F4SD Input Voltage: 2-6S Lipo BEC Output: 5V 3A Fimware: betaflihgt_3.2.0_OMNIBUSF4SD - Built-in OSD (support BF Ground Station adjust OSD) - Adjust the PID by OSD via remote control - Support SAMRT AUDIO, adjust the VTX by OSD (UART3) - MicroSD card blackbox - Support PPM, SBUS, IBUS, DSM2/ DSMX Receiver (UART1) FPV Transmitter: Channel: 40CH Power: 25/200/600/800mW ( Switchable) Frequency: 5362-5945MHZ Video Format: NTSC/PAL Working Voltage: DC 7-24V Output Voltage: 5V @ 450mA Working Current: 25mW@ 240mA; 200mW@340mA;                             600mW@520mA; 800mW@600mA RemoteSoftwareprotocol: SmartAudio V2.0 Audio Bandwidth: 6.5MHZ Video Bandwidth: 18MHZ Range: Up to 4km omnidirectional RHCP antennas Connector: MMCX Supports smart audio (remote parameter adjustment)
40A BLheli_32 4 in 1 ESC	Con. Current: 40A Peak Current: 50A BEC Output: NO Firmware: BLheli_32 Mounting Hole: 30.5x30.5mm - Built-in Current Sensor - Dshot1200 up to 32kHz Support Damped Mode, Oneshot125, Oneshot42, Multishot Support Dshot150, Dshot300, Dshot600, forward and reverse - Auto timing feature
Rcharlance DT2306 2400KV Motor	Brand Name: Rcharlance Model: DT2306 Item Name: 2306 2400KV Motor Lipo Battery: 2-4S Spindle diameter: 23mm Spindle length: 6mm Out shaft diameter: 5mm Motor size: Φ33.5 × 39.1mm Thrust: 2600g (16V 5048 3-blade prop)
800TVL 1/3 CCD FPV Camera	Horizontal resolution: 800TVL TV system: PAL / NTSC 5D-OSD button: yes Input voltage: 12V DC Dimensions(mm): 25X25(W*L) Menu (OSD): English menu White Dot Repair: Support Image Adjustment: Support Weight: 14.6g(with bracket) Power Consumption: 70mA
Frsky XM+ Receiver ( BNF Version Only )	Number of channels: up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC) Operating voltage range: 3.7~10V Operating current: 30mA @5V Operating range: full range With RSSI output on board: analog 0~3.3V Firmware upgradeable Dimension: 21.5*12*3.5mm(L x W x H) Weight: 1.6g

Package Included:

1x 218mm Carbon Fiber Frame Kit

1x Rcharlance F4PRO+ Flight Controller 5.8G 48CH FPV 

1x 40A Blheli-32 4 In 1 ESC

1x 800TVL CCD CAMERA 

4x 2306-2400KV

4x Programmable RGB LED lights

4 x purple propeller CW

4 x purple propeller CCW

1 x Antenna

1 x Battery plate

1 x Battery strap

1 x Camera bracket (Gopro)