Features:
Eye protection design: The panoramic filter glass protective
cover plays a very good role in protecting your eyes, filtering 97% of
the ultraviolet light, you and the people around you can also watch
laser engraving without wear goggles. Reduce the cost of your goggles
and the inconvenience of wearing goggles.
Easy to install & solid structure: The all-aluminum
alloy anodized structure design makes the machine more durable, and
improves the accuracy of engraving. The entire structure has been
designed for quick assembly, and the assembly can generally be completed
within 10-20 minutes.
Upgraded dual compression spot coupling technology: Ultra-fine
laser focus area is reduced to 0.08x0.06mm, high-density laser can
easily cut 20mm thick wood, 15mm thick acrylic; Can directly engrave
mirror stainless steel metal, ceramics, glass, and engraving &
cutting speed is 40% higher than the ordinary model, which can be
comparable to the effect of the 150W CO₂ laser engraving machine.
Upgraded fixed-focus laser: No need to adjust the focus
before engraving; The focal spot area of the new laser is only 1/3 of
the spot area of other ordinary lasers, new laser combine precision
engraving and high energy cutting at the same time. The laser power of
the fixed-focus laser is more stable than the zoom laser.
Precise scale lines axis: There are precise scale lines
on the X-axis and Y-axis to facilitate quick length measurement.
220x250mm large area engraving interval can meet your various engraving
needs.
Wide compatibility: The machine can be compatible with
various mature engraving software, such as LaserGRBL, LightBurn, support
Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAC system
(LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
More function: uses an integrated screw rod which
makes the movement of the laser more precise and the coupling more
durable. Support offline engraving; In the event of an unexpected
situation, stop the machine at any time to make the engraving safer. The
laser sintering temperature is up to 1200℃.
Specification:
Model: ATOMSTACK P9 M50
Recommend Print Size: 220x250mm
Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective
Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting Objects: Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge;
Laser power: 50W
Laser output power: 10-11W
Wave Length: 445 ± 5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no need to focus
Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.
Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Data transmission method: USB connection/TF card
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 5A
Certification: CE FCC RoHS FDA PSE
Package Size: 49 x 27.5 x 13.5cm/19.2 x 10.8 x 5.3in
Package Weight: 4940g/10.9lbs
Note:
● When operating the laser engraving machine, please install the laser
protective cover. If it is not installed, you need to wear goggles.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror
reflecting object, which may cause injury to the operator or burn the
laser.
Packing List:
1 × Screw parts (Step2/3/4/5)
1 × Dust-free cloth
1 × Tool kit
1 × Fixed focus film
3 × Acrylic sheet
3 × Wood chips
1 × Card reader
5× Cable tie
1 × Accessories package
1 × Display assembly
1 × Display cable
1 × Power adapter
1 × Power cable
1 × Data line
1 × Metal cutting pad
1 × Manual
1 × Laser assembly
1 × X axis assembly
1 × Y axis assembly
2 × Support tripod
4 × Assembly block
1 × Desiccant
