Features:
1. Laser range finder and tape measure 2 in 1 for easy measurement
2. Shell made of new materials from TPR and ABS
3. Use photoelectric focusing laser emitter and light sensor
4.LCD high-definition display shows measurement data
Specification:| Model | FL519 |
| Maximum measurement range | 0.2-40M |
| Measurement accuracy | ±1.5mm |
| Units of measurement | m/ft |
| Laser level | Class2 |
| Laser type | 630-670nm, <1mW |
| Single measurement | √ |
| Continuous measurement | √ |
| Button | Soft button |
| Operating temperature | 0°C-40°C |
| Storage temperature | -10°C-60°C |
| Battery Life | Up to 5000 measurements |
| Battery selection | AAA2X1.5V(not included) |
| Laser auto off | 30s |
| Length x width x height | 86mmx50mmx80mm |
| Weight | 305g |
Instructions:
1. Tap the “laser measurement button” to turn on the laser measurement.
2. Select the distance to be measured, and measure the laser point at the measurement point again by pressing the button.
3. After the measurement is completed, the laser will turn off and the measurement result will be on the display.
4. Press and hold the 3s button to switch between “metric/imperial”.
5. Press and hold the 5s button to turn
off the machine; if there is no operation device for 3 minutes, it will
automatically shut down.
Package includes:1 X Laser range finder
1 X Screwdriver
