Specification:
Name: Electromagnetic Radiation Detector
Size: 132mm (length) × 69mm (width) × 29mm (high)
Weight: 190 grams
Readings show: three and a half liquid crystal display, the largest reading 1999.
Test bandwidth: 50Hz-2000MHz
Sampling time: about 0.4 seconds
Working voltage: 9V
Battery Type: 6F22 9V
Features:
1. Simple operation, can quickly measure the home appliances, wires and
industrial equipment around the electromagnetic radiation intensity.
2. Easy to carry.
3. The test band is wide. Numerical contrast is obvious, suitable for
radiation effects of the measurement of the demonstration, and personal
understanding of radiation.
4. For environmental electromagnetic radiation testing: room, office, calculation
5. Room, control room, cable, high voltage lines, monitors and other radiation source of the test the amount.
6. Used for household appliances electromagnetic radiation measurement: computer, electricity.
7. Video machines, photocopiers, fax machines, air conditioners,
refrigerators and other radiation sources of the test analysis.
8. Measured AC current radiation, direct electricity to meet the safety standards can not be measured.
Measurement procedure:
1. Press the power switch, to be measured to be measured electrical measurement.
2. Holding the instrument slowly close to the object to be measured
until it comes into contact with,The closer the object to be measured
the greater the electromagnetic radiation value.
3. The measurement process to try to change the instrument angle, has reached the best test amount of effect.
4. If the process of measuring the object closed in the power supply,
the instrument reading should return to zero state unless there are
other disturbances.
About the battery:
1. When the instrument test data becomes smaller or no alarm, please replace the battery in time.
2. The instrument need to be stored to remove the battery.
Package Included:
1 x 1030SMP Power Booster
