Specifications:
Material:Aluminum alloy,glass
Color:Silver gold
Size:113x105x60mm
Instructions:
-Place the engine model in horizontal position,make sure there is no
wind flow in presence,and unscrew the valve(water- injection screw
cover) in the boiler to add water.Note the water can only be added to
2/3 of the capacity!
-Add alcohol into the spirit lamp to 2/3 of the capacity,place wicks
into the copper cover and place the two spirit lamps into the two lamp
bases under the boiler.Ignite the spiritlamps with the precondition that
safety is ensured and heat the boiler.
-Heat the boiler water to the boiling point,rotate the flywheel(follow
the starting direction shown in the figure)until the flywheel can rotate
by itself.
-Under anhydrous conditions prohibit heating steam boiler,the model may cause serious injury!
Note:
-This engine is perfectly for kids over 12 years old.
-There will be the operation of steam,when the steam too much, the engine will stop working,
inside and outside the needle often set aside to reduce friction
-Do not rotate the nut too tightly, otherwise the glass is broken, if the piston is cracked,
can be bonded with glue.
-The alcohol lamp wick do not touch the glass, do not get too tight ring
-Pulling the piston connecting rod can not force the front end, because the front
end is easy to break
Package included:
1 Set of Stirling Engine model
