To Buy It Click Here
Built-in memory card format operation:
Before
using it for the first time, especially for a memory card larger than
32GB, insert the memory card and press and hold the power button and the
camera button for 2S at the same time in the power-on state. After the
blue light and the green light flash quickly, the blue light goes out
first, and the green light turns on, etc. For 2-5 seconds, the green
light is off, and the blue light is on. The memory card is formatted
successfully. The formatting time may be different because of the brand
of the memory card, the size of the memory card and the speed of reading
and storing. There is a difference in waiting time. Please pay
attention to the instructions. If the format is successful, the
indicator light will return to the blue light and return to the standby
mode, and it can be operated (if the memory card has important files,
please backup it first). It is recommended to use a genuine high-speed
memory card
Note: When
using a new memory card for the first time, if the memory card
attribute is not FAT32, turn on the machine to automatically format the
memory card, and then enter the standby state. Be careful to back up the
data in advance to avoid loss.
Operation Guide:
1.
Power on: Press and hold the power button for three seconds, and the
blue light will be on for three seconds to turn on and enter the standby
mode.
2.
Video: In the standby state, short press the "Power/Video button", the
blue light flashes slowly 3 times and goes out to start recording. Then
short press the "Power/Video button" to stop recording and save, and the
blue light is on.
Note: In
the video mode, short press any button except the power button, the
blue indicator light flashes 3 times and goes out, you can know that the
machine is in the video mode. If the indicator light does not flash,
the machine has been shut down.
The
video is automatically saved in segments, 5 minutes as one segment in
cyclic mode, and 8 minutes as one segment in non-cyclic mode.
3.
Recording: short press the "recording button", the green light flashes
slowly 3 times and then goes out to start recording; short press the
"recording button" again to stop recording and save, the blue light is
on.
Note: In
the recording mode, short press any button except the recording button.
The green indicator light flashes 3 times and goes out. You can know
that the machine is in the recording mode. If the indicator light does
not flash, the machine has been shut down.
The recording is automatically saved in sections, 60 minutes as one section.
4. Take
a photo: In standby, short press the "photograph button", the blue
light is off and the green light is on until the save is complete, then
the green light is off and the blue light is on.
5.
Motion sensor detection: In the standby mode, long press the
"photograph button" for 2 seconds to enter the motion sensor detection
mode to record. When the light change is detected, the machine will
enter the recording state, and there will always be light changes, and
the machine automatically every 2 minutes Save once, the blue indicator
light will light up as a reminder, when there is no light change, it
will return to the motion sensor detection standby mode. At this time,
long press the "photograph button" for 2 seconds to return to standby
mode.
Note: In
motion sensor detection mode, except long press any button other than
the camera button, the blue and green indicator light flashes 3 times
and goes out. You can know that the machine is in motion sensor
detection standby mode. If the flashing does not flash, the machine has
been shut down. Motion sensor detection saves a file in 2 minutes, and
the indicator will flash once every time it is saved.
6.Turn
on/off the infrared light: in the standby mode, long press the
"recording button" for 2 seconds, the green light is on, and the
infrared light is on. When entering infrared video standby, the infrared
light is turned on first, and the infrared light cannot be turned on
when it has entered the working state.
7.
Reset: When the product does not respond, you can use the card pin to
slam the reset hole and the machine can shut down and work normally.
8. PC camera: When the memory card is not inserted, it can be used as a PC camera when connected to a computer.
9. In standby mode, it will automatically shut down without any operation for 5 minutes
10. When the power is low, the blue and green lights flash alternately, each flashing 10 times, and then shut down.
11.When there is no card, the blue and green lights flash 5 times at the same time, and then shut down.
12.
If you use OTG to connect to mobile phones, TVs, tablets and other
devices to connect to playback, there is a message that the memory card
is damaged and cannot be recognized. When you need to format the memory
card, you can connect to the computer for playback. Because there are
many mobile phone systems, it may be formatted by the machine. It will
cause the phone to fail to recognize the memory card, but the files are
still stored on the memory card normally. Please refer to the computer
at this time. Please use the data cable to connect the computer to play
back the files.
Setting/time watermark, video resolution, loop video lens 180 degree flip:
1.
After inserting the memory card in the product, turn it on and then
connect to the computer, find "settings" in the root directory of the TF
card, open the text and enter: 0,1,1,0 in the English input
2. The first number is to set the resolution: 0 is 720P, 1 is 1080P.
3. The second digital switch loops video recording: 0 means off, 1 means on.
4. The third digital switch time watermark: 0 means off, 1 means on.
5. For the fourth number, 0 is positive, 1 is the lens flipped 180 degrees is positive
Time setting:
Modification
time: After inserting the memory card in the product, connect it to the
computer after booting, and find the TF card root directory
set
time. txt, open it and enter it in the English input method to modify
the current time value and save it. For example: 2020-11-28, 23:59:59
are respectively
2020, November 28 at 23:59:59. After success, the time in the txt will be restored to the initial time.
Battery management:
This machine has a built-in rechargeable lithium battery. When you use it for the first time, please charge it as follows:
1. Connect to the computer for charging and use USB to connect to the computer.
2.
Record while charging, you can record while charging; (External USB 5V
charger or mobile power supply, can not connect to the computer while
recording)
3.
The blue light and the red light are always on when charging, and the
red light is off when fully charged and the blue light is always on;
(after the red light is off, please charge for about 30 minutes to
ensure that the battery is 100% full) Under normal circumstances, charge
for 3-4 hours It can be filled.
Related parameters:
Video format | AV1 | Image ratio | 16:9 |
Video encoding | M-JPEG | Video working hours | 8H |
Resolution | 1920*1080P/1280*720P(Optional) | Recording working hours | 10H |
Video frame rate | 30fps | Charging voltage | DC-5V |
Playback software | Operating system comes with or mainstream video play back software | Interface Type | Type-C |
support system | Windows me/2000/xp/2003/vista/mac os，linux/win7/8,10 | Storage type | Support TF card-8-256GB (high-speed card recommended) |
battery capacity | 1050 mah | Camera angle | 120° |
Matters needing attention:
Please read this manual carefully before using the product and save it for future use.
1.
This machine does not have memory, please insert the TF card before
use. Please turn off the TF card before inserting or removing it.
2.
In order to avoid the risk of data loss that may be caused by
misoperation or malfunction of the machine, please always back up data
on the computer.
3.
The company is not responsible for disputes caused by camera or
recording actions that are not approved by others, which have nothing to
do with this product.
4. This product has a free warranty for one year from the date of sale
Package included:
1 x Camera Pen
1 x USB cable
1 x Manual
1 x Packing box
